Hi All,
was finding this difficult to trace cause, thinking this was firewall issue
(It may have been able to be solved via a network config but I lack the info for such an endeavor.)
Setup:
proxmox (PVE1@ 192.168.1.2/24) (working fine for several months)
VM Zentyal 6.3 VM (192.168.1.1/24)
VM CenOS etc
...
Client (PC@ 192.168.1.116/32 DHCP via Zentyal, wont allow /24 not sure why that is)
...
Now installing additional Proxmox server to host further research VM's
Installation went fine..
(The new proxmox report its ready on the https://192.168.1.29:8006)proxmox (PVE2@ 192.168.1.29/32)
issues:
I can ping Zentyal (192.168.1.1/32) from proxmox (PVE2@ 192.168.1.29/32)
I can ping proxmox (192.168.1.29/32) from zentyal (192.168.1.1/24)
I
can not ping proxmox (192.168.1.29/32) from client (192.168.1.116/32)
I
can not ping proxmox (192.168.1.29/32) from proxmox (192.168.1.2/24) (mask issue?)
thus the GUI to proxmox (192.168.1.29/32) from a client machine (192.168.1.116) does not come up.
Checking the log from the Zentyal firewall module reports ACCESS was dropped
2020-12-31 20:15:57 eth1 eth1 192.168.1.29 192.168.1.116 TCP 8006 51359 DROP also
2020-12-31 20:15:57 eth1 192.168.1.1 192.168.1.116 TCP 8006 51359 DROPAs the firewall rules are open and at defaults the issue points to static address may be required for proxmox and
reserved in Zentyal.
*FIXED:
reinstalled proxmox with a IPaddress as static 192.168.1.7/24 (note the mask is not 32)
and reserved the address in Zentyal (DHCP Advanced and added the defined object)
I can now ping from the client (192.168.1.116/32) to (192.168.1.7/24)
and also ping from PVE1 to PVE2
Hopefully this is the correct method for this type of setup,
Help understanding why ZENTYAL dhcp wont work for this would be appreciated.