I have two ebox machines, both version 1.4-1. #1 is a gateway, with 2 lan subnets, one for PCs and one for communications with ebox machine #2. Both lan interfaces have static IPs, lan1 is internal, is 10.2.2.1/23. lan2 is also internal, IP is 10.2.4.1/23. DCHP server is enabled on both interfaces to pass out IPs to client PCs (or to the other ebox machine)
machine #2 has 3 lan subnets:
lan2.1 has a dynamic IP, set to internal since it is, it receives its IP from machine #1, currently 10.2.4.2/23. It sucessfully receives an IP from ebox machine #1.
lan3 is internal, static IP 10.2.6.1/23, DHCP server is enabled.
lan4 is internal, static IP 10.2.8.1/23, DHCP server enabled
All of the internal networks can communicate just fine if they are all connected to one ebox machine. However, ebox machine 1 and 2 wont talk to each other. Ebox#2 will successfully obtain a correct IP address from #1, and the correct information for ebox machine #1 shows up in the gateways section... however I cannot ping #1 from #2 or vice versa, nor can I ping any of the internal networks connected to the other machine. Internet traffic will not pass from machine #1 to the networks on machine #2.
Just to make sure the firewall wasn't getting in the way, I disabled it on both machines so that all traffic should be allowed in or out of either machine... still no luck. Any suggestions?