nic1) eth2 (nic2)eth0
static/ dhcp
isp---------------zentyal---------------------------- router/wap for home pc's/tablets, ect
ebox ----------------------------- ps3
nic3(eth1)
static
nic1: external Subnet: 64.113.173.128/25
nic2: internal Subnet: 192.168.0.0/25
nic3: internal subnet: 192.168.1.0/24
I am going to refer to your network devices just by their ethX names.
eth2 connected to isp. IP statically set to 64.113.173.128 and netmask set to 255.255.255.128 marked as external in Zentyal.
eth0 connected to AP (not in the WAN port) IP set statically 192.168.0.1 netmask 255.255.255.0.
(Note-- turn off dhcp in the AP and turn on dhcp in Zentyal)
eth1 connected to PS3 IP statically set 192.168.1.1 netmask 255.255.255.0
You will need to define dhcp settings for eth0 and eth1.
Once you have things setup time to test.
on the Zentyal server:
ping 8.8.8.8 (you should get responses if not you have a physical network problem)
ping
www.yahoo.com ( you should get responses, if it says hostname not found you have dns problems)
Computer on internal network:
check to see if you have an IP address -- if not dhcp has not been setup properly
ping 192.168.0.1
ping 8.8.8.8
ping
www.yahoo.comThis doesn't cover all of the steps necessary to get it running but I am making assumptions about what you have already done. Let us know where you are still having problems.