Messages

1

Installation and Upgrades / Re: ebox 1.3.15 cannot retrieve external mail

« on: March 12, 2012, 12:02:02 pm »

hello, i have the same problem with zentyal 2.2, il have in /var/log/mail.log :

Code: [Select]

Mar 12 11:54:58 mail fetchmail[3911]: reading message commercial@domain.com@pop3.xxxxxxx.xxx:32 of 44 (647118 octets) (log message incomplete)
Mar 12 11:54:58 mail fetchmail[3911]: MDA returned nonzero status 70
Mar 12 11:54:58 mail fetchmail[3911]:  not flushed
Q : where can i add "dropdelivered" ? or how to resolve the problem ?
Thanks.

2

Installation and Upgrades / Re: MYSQL password for Zentyal 2.0

« on: November 08, 2010, 02:49:19 pm »

My problem was resolved :
user = 'root'   ==> password = '' (empty)
user = 'zarafa'  ==> password = '</var/lib/ebox/conf/ebox-zarafa.passwd>'

3

Installation and Upgrades / Re: MYSQL password for Zentyal 2.0

« on: November 08, 2010, 09:40:34 am »

Any idea please, i can't install avantfax depend of MYSQL.

4

Installation and Upgrades / Re: MYSQL password for Zentyal 2.0

« on: November 05, 2010, 05:18:26 pm »

mysql is only installed as a dependency of the zarafa module, the password is stored in the following file:

/var/lib/ebox/conf/ebox-zarafa.passwd

I try that password to connect to mysql but not working :

Code: [Select]

$ mysql -uroot -p
Enter password:
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)


5

Installation and Upgrades / Re: zarafa : Enable Active Sync : howto config client

« on: October 18, 2010, 06:18:13 pm »

Thank you for your reply.
Howto sync the calendar with lightning ? have a link or same details, please.

6

Installation and Upgrades / Re: zarafa : Enable Active Sync : howto config client

« on: October 16, 2010, 10:58:08 am »

I remade my question with another way. Is there a solution to syncronous outlook (or thunderbird) calendar , contact and tasks with zarafa webaccess ? (other than zarafa client) 

7

Installation and Upgrades / zarafa : Enable Active Sync : howto config client

« on: October 15, 2010, 12:50:26 pm »

I have enabled Active Sync for zarafa groupware, but i dont now howto config the client.
Is there a doc or any ideas for config outlook or thunderbird with lightning to sync calendar and contacts ?

8

Installation and Upgrades / Re: NEW YAHOO MAIL interface

« on: September 30, 2010, 05:24:39 pm »

I have the same problem. Have you a solution ?

9

Installation and Upgrades / Re: bug with HTTP proxy antivirus

« on: June 08, 2010, 01:56:31 pm »

howto do that please .
I'm newbie in ebox.

10

Installation and Upgrades / Re: bug with HTTP proxy antivirus

« on: June 08, 2010, 11:36:22 am »

i have change "/etc/clamav/clamd.conf" :
   

Code: [Select]

DetectBrokenExecutables  truewith   

Code: [Select]

DetectBrokenExecutables  falseand i restart ebox antivirus.
Is that cause a problem ? what is means of broken executable in clamav ?

11

Installation and Upgrades / bug with HTTP proxy antivirus

« on: June 07, 2010, 11:51:51 am »

Hello
I have problem with antivirus module with HTTP proxy. Some download links (not all links) not working, a error message display "Virus or bad content detected. Broken.Executable Categories: Content scanning ".
And when i disable HTTP proxy antivirus, it download without problem.

example : http://download.microsoft.com/download/8/e/c/8ec3a7d8-05b4-440a-a71e-ca3ee25fe057/rktools.exe

any ideas please ?

12

Installation and Upgrades / Re: problem after change mail Services Certificates

« on: March 29, 2010, 10:11:35 am »

Any idea ? I'm blocked , PLEASE .

13

Installation and Upgrades / Re: problem after change mail Services Certificates

« on: March 28, 2010, 07:29:22 pm »

Up please  

i think the problem is in the ldap :

Code: [Select]

# /etc/init.d/slapd start
Starting OpenLDAP: slapd - failed.
The operation failed but no output was produced. For hints on what went
wrong please refer to the system's logfiles (e.g. /var/log/syslog) or
try running the daemon in Debug mode like via "slapd -d 16383" (warning:
this will create copious output).

Below, you can find the command line options used by this script to
run slapd. Do not forget to specify those options if you
want to look to debugging output:
  slapd -h 'ldap:/// ldapi:/// ldaps:///' -g openldap -u openldap -F /etc/ldap/slapd.d/

# slapd -d 16383
(the end of show:)

Code: [Select]

olcObjectIdentifier: value #122 olcObjectIdentifier: "AsteriskConfig" previously defined "1.3.6.1.4.1.22736.5.2.4"
olcObjectIdentifier: value #123 olcObjectIdentifier: "AsteriskVoiceMail" previously defined "1.3.6.1.4.1.22736.5.2.5"
olcObjectIdentifier: value #124 olcObjectIdentifier: "AsteriskDialplan" previously defined "1.3.6.1.4.1.22736.5.2.6"
olcObjectIdentifier: value #125 olcObjectIdentifier: "AsteriskAccount" previously defined "1.3.6.1.4.1.22736.5.2.7"
olcObjectIdentifier: value #126 olcObjectIdentifier: "AsteriskMailbox" previously defined "1.3.6.1.4.1.22736.5.2.8"
olcObjectIdentifier: value #127 olcObjectIdentifier: "AsteriskQueue" previously defined "1.3.6.1.4.1.22736.5.2.9"
olcObjectIdentifier: value #128 olcObjectIdentifier: "AsteriskQueueMember" previously defined "1.3.6.1.4.1.22736.5.2.10"
olcObjectIdentifier: value #129 olcObjectIdentifier: "AsteriskMeetme" previously defined "1.3.6.1.4.1.22736.5.2.11"
olcAttributeTypes: value #0 olcAttributeTypes: Duplicate attributeType: ""
config error processing cn={2}asterisk,cn=schema,cn=config: olcAttributeTypes: Duplicate attributeType: ""
send_ldap_result: conn=-1 op=0 p=0
send_ldap_result: err=80 matched="" text=""
slapd destroy: freeing system resources.
slapd stopped.
connections_destroy: nothing to destroy.

But i don't now how to repair.

(Sorry for the bad English)

14

Installation and Upgrades / Re: Graphical interface not loading

« on: March 27, 2010, 04:39:25 pm »

sudo apt-get update

sudo apt-get upgrade

15

Installation and Upgrades / problem after change mail Services Certificates

« on: March 27, 2010, 03:23:35 pm »

Hello,
i have change the common name of mail module in Services Certificates, and after i save the config with errors.
when i go to users :

Code: [Select]

A really nasty bug has occurred
Exception
Can't create ldapi connection
Trace
Can't create ldapi connection at /usr/share/perl5/EBox/Ldap.pm line 175
EBox::Ldap::anonymousLdapCon('EBox::Ldap=HASH(0x99a0640)') called at /usr/share/perl5/EBox/Ldap.pm line 243
EBox::Ldap::dn('EBox::Ldap=HASH(0x99a0640)') called at /usr/share/perl5/EBox/UsersAndGroups.pm line 338
EBox::UsersAndGroups::groupsDn('EBox::UsersAndGroups=HASH(0x96d4050)') called at /usr/share/perl5/EBox/UsersAndGroups.pm line 1678
EBox::UsersAndGroups::groups('EBox::UsersAndGroups=HASH(0x96d4050)') called at /usr/share/perl5/EBox/CGI/UsersAndGroups/Users.pm line 48
EBox::CGI::UsersAndGroups::Users::_process('EBox::CGI::UsersAndGroups::Users=HASH(0xbd24518)') called at /usr/share/perl5/EBox/CGI/Base.pm line 262
EBox::CGI::Base::run('EBox::CGI::UsersAndGroups::Users=HASH(0xbd24518)') called at /usr/share/perl5/EBox/CGI/Run.pm line 120
EBox::CGI::Run::run('EBox::CGI::Run', 'UsersAndGroups/Users', 'EBox') called at /usr/share/ebox/cgi/ebox.cgi line 19
ModPerl::ROOT::ModPerl::Registry::usr_share_ebox_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0xb93734c)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
eval {...} called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0xbc5143c)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 170
ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0xbc5143c)') called at /usr/lib/perl5/ModPerl/Registry.pm line 31
ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0xb93734c)') called at -e line 0
eval {...} called at -e line 0
in /var/log/ebox/ebox.log :

Code: [Select]

2010/03/27 15:20:07 ERROR> Ldap.pm:175 EBox::Ldap::anonymousLdapCon - Can't create ldapi connection
2010/03/27 15:20:13 ERROR> Ldap.pm:175 EBox::Ldap::anonymousLdapCon - Can't create ldapi connection


Help please