This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
46
Directory and Authentication / local admin GPO greyedout?
« on: December 23, 2020, 03:39:28 am »
Hi,
I was wondering if someone else has had this issue, with zentyal 6.2 not sure if its zentyal or the windows, i tried creating local admin though GPO but the password is greyed out which is very odd
Thank you
https://imgur.com/6l5wC8K.png
I was wondering if someone else has had this issue, with zentyal 6.2 not sure if its zentyal or the windows, i tried creating local admin though GPO but the password is greyed out which is very odd
Thank you
https://imgur.com/6l5wC8K.png
47
Directory and Authentication / issue not resolving?
« on: December 22, 2020, 07:47:46 pm »
Hi currently running zentyal 6.2 what i noticed is that cannot seem to resolve by IP but by name it works
currently tick the box Dynamic DNS Options but not sure what i missed?
just checked the logs and found this
and whats even odd is that i check the service of DHCP which shows on but on the WebGui shows stopped
https://imgur.com/QtTnZuL.png
currently tick the box Dynamic DNS Options but not sure what i missed?
Code: [Select]
C:\Users\administrador.xx>nslookup
Servidor predeterminado: apolo.xx.local
Address: 192.168.100.200
> pc-23
Servidor: apolo.xxx.local
Address: 192.168.100.200
Nombre: pc-23.xx.local
Address: 192.168.100.59
> 192.168.100.59
Servidor: apolo.xx.local
Address: 192.168.100.200
*** apolo.xx.local no encuentra 192.168.100.59: Non-existent domain
just checked the logs and found this
Code: [Select]
Dec 22 13:51:34 apolo dhcpd[17404]: execute: /usr/share/zentyal-dhcp/dhcp-dyndns.sh exit status 32512
and whats even odd is that i check the service of DHCP which shows on but on the WebGui shows stopped
Code: [Select]
root@apolo:~# service isc-dhcp-server status
● isc-dhcp-server.service - ISC DHCP IPv4 server
Loaded: loaded (/lib/systemd/system/isc-dhcp-server.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2020-12-22 13:50:16 -05; 3min 26s ago
Docs: man:dhcpd(8)
Main PID: 17404 (dhcpd)
Tasks: 1 (limit: 4620)
CGroup: /system.slice/isc-dhcp-server.service
└─17404 dhcpd -user dhcpd -group dhcpd -f -4 -pf /run/dhcp-server/dhcpd.pid -cf /etc/dhcp/dhcpd.conf
Dec 22 13:53:30 apolo dhcpd[17404]: DHCPACK on 192.168.100.48 to f8:1f:32:c6:19:b4 via eth0
Dec 22 13:53:30 apolo dhcpd[17404]: Commit: IP: 192.168.100.49 DHCID: c0:cb:38:15:96:79 Name: PC-07
Dec 22 13:53:30 apolo dhcpd[17404]: execute_statement argv[0] = /usr/share/zentyal-dhcp/dhcp-dyndns.sh
Dec 22 13:53:30 apolo dhcpd[17404]: execute_statement argv[1] = add
Dec 22 13:53:30 apolo dhcpd[17404]: execute_statement argv[2] = 192.168.100.49
Dec 22 13:53:30 apolo dhcpd[17404]: execute_statement argv[3] = c0:cb:38:15:96:79
Dec 22 13:53:30 apolo dhcpd[17404]: execute_statement argv[4] = PC-07
Dec 22 13:53:30 apolo dhcpd[17404]: execute: /usr/share/zentyal-dhcp/dhcp-dyndns.sh exit status 32512
Dec 22 13:53:30 apolo dhcpd[17404]: DHCPREQUEST for 192.168.100.49 from c0:cb:38:15:96:79 (PC-07) via eth0
Dec 22 13:53:30 apolo dhcpd[17404]: DHCPACK on 192.168.100.49 to c0:cb:38:15:96:79 (PC-07) via eth0
https://imgur.com/QtTnZuL.png
48
Directory and Authentication / Re: Logon Script
« on: December 02, 2020, 12:31:51 am »
the scrip folder should be located in
\\192.168.3.150\sysvol\yourdomain\scripts
\\192.168.3.150\sysvol\yourdomain\scripts
49
Directory and Authentication / Re: Logon Script
« on: December 01, 2020, 04:23:38 am »
did you install the GPO addon on a windows machine to deploy the script?
50
Directory and Authentication / Re: Samba issue with scan printer
« on: November 29, 2020, 01:02:18 am »
yeah i know it sucks but yeah it got resolved
51
Directory and Authentication / Re: Samba issue with scan printer
« on: November 28, 2020, 01:37:02 am »
yeah your right, what i did put another samba server
52
Directory and Authentication / Re: Samba issue with scan printer
« on: November 25, 2020, 06:43:41 pm »
Thanks for the reply, well unfortunately it seems that printer does not have any firmware update
https://www.ricoh.com/products/mfp20170727_1
i guess im going to have to enable smbv1 but still haven't seem to be able to configure it
Thank you
https://www.ricoh.com/products/mfp20170727_1
i guess im going to have to enable smbv1 but still haven't seem to be able to configure it
Thank you
53
Directory and Authentication / Re: GPO script logon not working?
« on: November 25, 2020, 06:30:26 pm »
Thanks for the reply that did the trick, very interesting that option that i needed to add
54
Directory and Authentication / Re: GPO script logon not working?
« on: November 23, 2020, 06:53:29 pm »
Thanks for the reply, so whats odd i ran this feature on a windows server 2012r2 and it works but on zentyal no feature works on GPO on the computer section, on the user sections works flawless. Example i tried adding installing OCS inventory though GPO on computer and did not ( from my previous forum post which i put a script GPO on user and it worked) work but i did the same on windows server GPO and it works.
Thank you again
Thank you again
55
Directory and Authentication / Samba issue with scan printer
« on: November 21, 2020, 06:12:20 am »
Hi
I was wondering if someone else has had this issue before. Currently running Aficio MP 4002 and on windows i can scan to a samba share it works unfortunately smbv1, i tried enabling on the samba share doing the following on the nano /etc/samba/smb.conf
and adding this under global then restart
service samba-ad-dc restart
client min protocol = NT1
server min protocol = NT1
But not sure what else i missed?
Thank you
I was wondering if someone else has had this issue before. Currently running Aficio MP 4002 and on windows i can scan to a samba share it works unfortunately smbv1, i tried enabling on the samba share doing the following on the nano /etc/samba/smb.conf
and adding this under global then restart
service samba-ad-dc restart
client min protocol = NT1
server min protocol = NT1
But not sure what else i missed?
Thank you
56
Directory and Authentication / Re: GPO script logon not working?
« on: November 18, 2020, 03:23:12 am »
thanks for the reply let me know :=)
57
Directory and Authentication / Re: GPO script logon not working?
« on: November 16, 2020, 07:02:57 pm »
Thanks for the reply, good thing forgot to add that checkbox but i also tried gpupdate /force and reboot all kinds and nothing not sure if on your environment it works?
58
Directory and Authentication / Re: GPO script logon not working?
« on: November 15, 2020, 02:26:29 am »
So coming back to the issue i have realized something the GPO dont seem to work for the config of computers only users. Im trying to update the local admin though GPO. I added this config
i restarted the server and checked if the local admin password was changed and it seemed that it was not. then ran a gpresult and it shows that it does not grab any Computer GPO
see pictures
https://ibb.co/7gKXnsp
https://ibb.co/nrzJFfy
i restarted the server and checked if the local admin password was changed and it seemed that it was not. then ran a gpresult and it shows that it does not grab any Computer GPO
see pictures
https://ibb.co/7gKXnsp
https://ibb.co/nrzJFfy
59
Directory and Authentication / Re: GPO script logon not working? (solved)
« on: October 05, 2020, 06:48:07 pm »
Thanks for the reply, what i did was instead running the script on startup i created a task to run the bat instead and it seemed to work that way
thank you again
thank you again
60
Directory and Authentication / GPO script logon not working?
« on: September 30, 2020, 06:45:55 pm »
Hi,
Currently trying to install a startup script though GPO, before trying on zentyal i did with a window server 2012r2 and it worked. So i think it might be a bug on zentyal.
on the GPO i added the startup script to the location of the script. All the users have permission to have access of the folder. I checked on event viewer and got the
1130 Group policy error
https://imgur.com/r2BRPre.png
https://imgur.com/gOc0eAw.png
any ideas?
Thank you
Currently trying to install a startup script though GPO, before trying on zentyal i did with a window server 2012r2 and it worked. So i think it might be a bug on zentyal.
on the GPO i added the startup script to the location of the script. All the users have permission to have access of the folder. I checked on event viewer and got the
1130 Group policy error
https://imgur.com/r2BRPre.png
https://imgur.com/gOc0eAw.png
any ideas?
Thank you