This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
16
Installation and Upgrades / Re: Setup and configuration Opendkim
« on: March 02, 2022, 09:06:01 am »
Hi,
I found the solution, download the proper RSAT for windows and use the DNS config tool to create the proper DNS record.
BR,
GáborS
I found the solution, download the proper RSAT for windows and use the DNS config tool to create the proper DNS record.
BR,
GáborS
17
Email and Groupware / Re: Sogo xml parse error
« on: March 02, 2022, 09:01:14 am »
Hi,
I let to fix the broken packages to the dsklect and now everything is working on my side.
THX for the help!
BR,
Gábort
I let to fix the broken packages to the dsklect and now everything is working on my side.
THX for the help!
BR,
Gábort
18
Email and Groupware / Re: Sogo xml parse error
« on: February 28, 2022, 10:14:57 am »
Hi,
The downgrade is working for me too, but now the package manager drop a error message, broken dependencies.
BR,
GaborS
The downgrade is working for me too, but now the package manager drop a error message, broken dependencies.
BR,
GaborS
19
Email and Groupware / Re: Sogo xml parse error
« on: February 25, 2022, 03:15:06 pm »
Hi,
The downgrade is broke the web, but solve the sync.
It is help for solving this issue?
BR,
GaborS
The downgrade is broke the web, but solve the sync.
It is help for solving this issue?
BR,
GaborS
20
Email and Groupware / Re: Sogo xml parse error
« on: February 24, 2022, 08:58:55 am »
Update:
I tried the webmail ( Sogo ) reinstall half good, half bad, The web interface is working now, but the device side sync steel not.
And the log is contain what i wrote earlier.
BR,
GaborS
I tried the webmail ( Sogo ) reinstall half good, half bad, The web interface is working now, but the device side sync steel not.
And the log is contain what i wrote earlier.
BR,
GaborS
21
Email and Groupware / Sogo xml parse error
« on: February 24, 2022, 08:33:57 am »
Hi Guys,
Please can you help in the following issue:
the Sogo is not working and i got the following error in the sogo.log:
xml2wbxmlFromContent: failed: Parsing of XML Document Failed
Please help.
Best Regards,
GaborS
Please can you help in the following issue:
the Sogo is not working and i got the following error in the sogo.log:
xml2wbxmlFromContent: failed: Parsing of XML Document Failed
Please help.
Best Regards,
GaborS
22
Email and Groupware / Re: ZENTYAL 6.1 und MACOS - Configuration Calender and Contacts
« on: September 09, 2021, 07:35:48 pm »23
Email and Groupware / Re: ZENTYAL 6.1 und MACOS - Configuration Calender and Contacts
« on: September 09, 2021, 07:28:14 pm »24
Installation and Upgrades / Re: Setup and configuration Opendkim
« on: July 19, 2021, 03:29:20 pm »
Hi!
I need some small help:
I created and i configured the DKIM on this article.
But when i try to cerate the internal dkim record i allways got this error message:
2021/07/19 15:22:45 ERROR> GlobalImpl.pm:653 EBox::GlobalImpl::saveAllModules - Failed to save changes in module dns: root command nsupdate -g -4 -t 10 /var/lib/zentyal/tmp/hZmjYbr4h9 failed.
Error output: 19-Jul-2021 15:22:45.229 dns_rdata_fromtext: buffer-0x7fcb88860e70:1: near '"v=DKIM1;': syntax error
invalid rdata format: syntax error
syntax error
Command output: .
Please can you help in this case?
BR,
GáborS
I need some small help:
I created and i configured the DKIM on this article.
But when i try to cerate the internal dkim record i allways got this error message:
2021/07/19 15:22:45 ERROR> GlobalImpl.pm:653 EBox::GlobalImpl::saveAllModules - Failed to save changes in module dns: root command nsupdate -g -4 -t 10 /var/lib/zentyal/tmp/hZmjYbr4h9 failed.
Error output: 19-Jul-2021 15:22:45.229 dns_rdata_fromtext: buffer-0x7fcb88860e70:1: near '"v=DKIM1;': syntax error
invalid rdata format: syntax error
syntax error
Command output: .
Please can you help in this case?
BR,
GáborS
25
News and Announcements / Re: Upgrade from Zentyal 6.2 to 7.0 is now available
« on: July 03, 2021, 04:21:38 pm »
Hi!
Somebody done with a zentyal upgrade smoothly?
Because my system is showing the upgrade is available... :-)
I wish to avoid a system crash.... :-)
Best Regards,
GáborS.
Somebody done with a zentyal upgrade smoothly?
Because my system is showing the upgrade is available... :-)
I wish to avoid a system crash.... :-)
Best Regards,
GáborS.
26
News and Announcements / Re: Upgrade from Zentyal 6.2 to 7.0 is now available
« on: March 09, 2021, 12:08:07 pm »
Dear Blorente!
Thank You!
The command is solve my problem.
But as i told earlier i run the apt update and apt upgrade command two times and i didn't see an pending update.
But THX again!
BR
GáborS
Thank You!
The command is solve my problem.
But as i told earlier i run the apt update and apt upgrade command two times and i didn't see an pending update.
But THX again!
BR
GáborS
27
News and Announcements / Re: Upgrade from Zentyal 6.2 to 7.0 is now available
« on: March 09, 2021, 11:03:19 am »
Hi Blorente!
Sorry but nope, i use the web ui...
I update to the latest version before i tried the upgrade.
The upgrade is started from the web interface....
And under the upgrade i didn't see any major issue....
Some small dependency issue has been occurred but nothing bigger....
BR,
Gábor Strama
Sorry but nope, i use the web ui...
I update to the latest version before i tried the upgrade.
The upgrade is started from the web interface....
And under the upgrade i didn't see any major issue....
Some small dependency issue has been occurred but nothing bigger....
BR,
Gábor Strama
28
News and Announcements / Re: Upgrade from Zentyal 6.2 to 7.0 is now available
« on: March 08, 2021, 10:56:23 pm »
Hi All!
I run the upgrade from 6.2.2 to 7.0 and currently the webadmin is not started with a follwing error message:
nginx: [emerg] SSL_CTX_use_certificate("/var/lib/zentyal/conf/ssl/ssl.pem") failed (SSL: error:140AB18F:SSL routines:SSL_CTX_use_certificate:ee key too small)
How can i solve this issue?
Can somebody help?
BR,
GáborS
Modify message
I run the upgrade from 6.2.2 to 7.0 and currently the webadmin is not started with a follwing error message:
nginx: [emerg] SSL_CTX_use_certificate("/var/lib/zentyal/conf/ssl/ssl.pem") failed (SSL: error:140AB18F:SSL routines:SSL_CTX_use_certificate:ee key too small)
How can i solve this issue?
Can somebody help?
BR,
GáborS
Modify message
29
Installation and Upgrades / Re: upgrade from 6.2 to 7.0
« on: March 08, 2021, 10:53:09 pm »
Hi All!
I run the upgrade from 6.2.2 to 7.0 and currently the webadmin is not started with a follwing error message:
nginx: [emerg] SSL_CTX_use_certificate("/var/lib/zentyal/conf/ssl/ssl.pem") failed (SSL: error:140AB18F:SSL routines:SSL_CTX_use_certificate:ee key too small)
How can i solve this issue?
Can somebody help?
BR,
GáborS
I run the upgrade from 6.2.2 to 7.0 and currently the webadmin is not started with a follwing error message:
nginx: [emerg] SSL_CTX_use_certificate("/var/lib/zentyal/conf/ssl/ssl.pem") failed (SSL: error:140AB18F:SSL routines:SSL_CTX_use_certificate:ee key too small)
How can i solve this issue?
Can somebody help?
BR,
GáborS
30
Other modules / Re: Virtual pc console from the management page not open
« on: February 01, 2021, 04:48:54 pm »
One like from me. :-)