This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Installation and Upgrades / SOGo - free/busy isn't showing
« on: November 14, 2014, 03:53:42 pm »
Hi!
I have a Zentyal 4.0.2 with OpenChange 4.0.3. I can't find upgradeable packages from Zentyal webadmin and not from command line. So I think I have a fresh Zentyal system.
I have two users (user1 and user2).
On the SOGo Webmail surface user 1 created a new event.
User2 in SOGo want to create a new event with user1. So user1 was invited by user2 but user2 not see user1 when will busy or free in the timeline.
What can I do? I think this is a bug or not?
Thanks,
Peter
I have a Zentyal 4.0.2 with OpenChange 4.0.3. I can't find upgradeable packages from Zentyal webadmin and not from command line. So I think I have a fresh Zentyal system.
I have two users (user1 and user2).
On the SOGo Webmail surface user 1 created a new event.
User2 in SOGo want to create a new event with user1. So user1 was invited by user2 but user2 not see user1 when will busy or free in the timeline.
What can I do? I think this is a bug or not?
Thanks,
Peter
2
Magyar / Re: Zentyal 4.0 - új felhasználó felvétele - sikertelen
« on: November 07, 2014, 09:08:22 am »
Újratelepítettem a Zentyal-t, ugyanúgy, mint először, most már nem jött elő ez a hiba. Bízom abban, hogy az időközben megjelent frissítéseket a telepítés során leszedte, azokkal együtt történt a telepítés és ez végleg megoldotta ezt a gondot. Elég kellemetlen lenne, ha egyszer csak "eljutna oda", hogy nem lehet többé felhasználót felvenni...
3
Installation and Upgrades / Re: Zentyal 4.0 - add new user - fail
« on: November 06, 2014, 02:56:39 pm »
I reinstalled the Zentyal and this problem is solved. I think during the installation procedure the Zentyal install the 4.0.1 packages from the internet.
4
Installation and Upgrades / Re: Zentyal 4.0 - add new user - fail
« on: November 06, 2014, 12:29:39 pm »
The Dashboard notified me: the 4.0.1 update iss available. I installed all updates but this problem isn't solved
5
Installation and Upgrades / Zentyal 4.0 - add new user - fail
« on: November 06, 2014, 12:02:18 pm »
Hi!
I have a fresh Zentyal 4.0 install with "Domain Controller and File Sharing" and "Openchange" modules.
I can't add new user after the first user.
I go to the "Users and Computers" -> "Manage" -> click on "Users" and I click on the green "+" sign.
On the new pop-up windows ("Add new" on the header) I filled out the "Username", "First name", "Last name" and the password fields.
I become the following error:
"Sorry, an unexpected error has occurred
root command openchange_newuser --create --enable --mail zoli@zentyal-domain.lan 'zoli' failed. Error output: params.c:pm_process() - Processing configuration file "/etc/samba/openchange.conf" params.c:pm_process() - Processing configuration file "/etc/samba/shares.conf" Traceback (most recent call last): File "/usr/sbin/openchange_newuser", line 63, in <module> lp, creds, opts.firstorg, opts.firstou) File "/usr/lib/python2.7/dist-packages/openchange/provision.py", line 156, in guess_names_from_smbconf assert(firstorg) AssertionError Command output: . Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240"
Below this message I have two buttons: "Show technical details" and "Report the problem". I reported the problem but I can't become any answer.
The technical details:
-------------------------------------------------------------------------------------------------------------------------------------------------
Error trace
root command openchange_newuser --create --enable --mail zoli@zentyal-domain.lan 'zoli' failed.
Error output: params.c:pm_process() - Processing configuration file "/etc/samba/openchange.conf"
params.c:pm_process() - Processing configuration file "/etc/samba/shares.conf"
Traceback (most recent call last):
File "/usr/sbin/openchange_newuser", line 63, in <module>
lp, creds, opts.firstorg, opts.firstou)
File "/usr/lib/python2.7/dist-packages/openchange/provision.py", line 156, in guess_names_from_smbconf
assert(firstorg)
AssertionError
Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240
in EBox::Sudo::_rootError at /usr/share/perl5/EBox/Sudo.pm line 240
237: throw EBox::Exceptions::Sudo::Wrapper("$sudocmd failed because either the current user (EUID $>) is not in sudoers files or it has incorrects settings on it. Running /usr/share/zentyal/sudoers-friendly maybe can fix this problem");
238: }
239: }
240: throw EBox::Exceptions::Sudo::Command(cmd => $cmd, output => $output, error => $error, exitValue => $exitValue)
241: }
242:
243: # Procedure: rootWithoutException
Show function arguments
in EBox::Sudo::_root at /usr/share/perl5/EBox/Sudo.pm line 210
207: if ( -r $STDERR_FILE) {
208: @error = read_file($STDERR_FILE);
209: }
210: _rootError($sudocmd, $commands, $ret, \@output, \@error);
211: }
212: }
213:
Show function arguments
in EBox::Sudo::root at /usr/share/perl5/EBox/Sudo.pm line 153
150: #
151: sub root
152: {
153: _root(1, @_);
154: }
155:
156: # Procedure: silentRoot
Show function arguments
in EBox::OpenChange::LdapUser::setAccountEnabled at /usr/share/perl5/EBox/OpenChange/LdapUser.pm line 120
117: $cmd .= " --mail $mail ";
118: }
119: $cmd .= " '$samAccountName' ";
120: EBox::Sudo::root($cmd);
121:
122: return 0;
123: }
Show function arguments
in EBox::OpenChange::LdapUser::_addUser at /usr/share/perl5/EBox/OpenChange/LdapUser.pm line 141
138: my $mailUserModel = $mail->model('MailUser');
139: return unless ($mailUserModel->enabledValue());
140:
141: $self->setAccountEnabled($user, 1);
142: }
143:
144: sub _delUserWarning
Show function arguments
in EBox::Samba::notifyModsLdapUserBase at /usr/share/perl5/EBox/Samba.pm line 2072
2069:
2070: # TODO catch errors here? Not a good idea. The way to go is
2071: # to implement full transaction support and rollback if a notified
2072: # module throws an exception
2073: $mod->$method(@{$args});
2074: }
2075:
Show function arguments
in (eval) at /usr/share/perl5/EBox/Samba/User.pm line 533
530: $res->_setFilesystemQuota($quota);
531:
532: # Call modules initialization
533: $usersMod->notifyModsLdapUserBase(
534: 'addUser', [ $res ], $res->{ignoreMods}, $res->{ignoreSlaves});
535: }
536: } catch ($error) {
in EBox::Samba::User::create at /usr/share/perl5/EBox/Samba/User.pm line 489
486:
487: my $res = undef;
488: my $entry = undef;
489: try {
490: $entry = new Net::LDAP::Entry($dn, @attr);
491: my $result = $entry->update($class->_ldap->connection());
492: if ($result->is_error()) {
Show function arguments
in EBox::Samba::CGI::AddUser::_process at /usr/share/perl5/EBox/Samba/CGI/AddUser.pm line 77
74: throw EBox::Exceptions::External(__('Passwords do not match.'));
75: }
76:
77: my $newUser = EBox::Samba::User->create(%params);
78: if ($params{group}) {
79: $newUser->addGroup(new EBox::Samba::Group(dn => $params{group}));
80: }
Show function arguments
in (eval) at /usr/share/perl5/EBox/CGI/ClientRawBase.pm line 160
157: else {
158: try {
159: $self->_validateReferer();
160: $self->_process();
161: } catch (EBox::Exceptions::DataInUse $e) {
162: if ($self->{json}) {
163: $self->setErrorFromException($e);
in EBox::CGI::ClientRawBase::run at /usr/share/perl5/EBox/CGI/ClientRawBase.pm line 158
155: $self->{redirect} = "/Login/Index";
156: }
157: else {
158: try {
159: $self->_validateReferer();
160: $self->_process();
161: } catch (EBox::Exceptions::DataInUse $e) {
Show function arguments
in (eval) at /usr/share/perl5/EBox/CGI/Run.pm line 92
89: $handler = new $classname(@extraParams);
90: }
91: }
92: $handler->run();
93: $redis->commit();
94: return $handler->response()->finalize();
95: } catch ($ex) {
in EBox::CGI::Run::run at /usr/share/perl5/EBox/CGI/Run.pm line 68
65: $redis->begin();
66:
67: my $url = $self->urlFromRequest($request);
68: try {
69: my $effectiveUrl = _urlAlias($url);
70: my @extraParams = (request => $request);
71: if ($htmlblocks) {
Show function arguments
in main::__ANON__ at /usr/share/zentyal/psgi/zentyal.psgi line 46
43: local $SIG{__WARN__} = sub { EBox::warn($_[0]) };
44:
45: my $req = Plack::Request->new($env);
46: return EBox::CGI::Run->run($req);
47: };
48:
49: my $builder = new Plack::Builder();
Show function arguments
in Plack::App::URLMap::call at /usr/share/perl5/Plack/App/URLMap.pm line 71
68: return $self->response_cb($app->($env), sub {
69: $env->{PATH_INFO} = $orig_path_info;
70: $env->{SCRIPT_NAME} = $orig_script_name;
71: });
72: }
73:
74: DEBUG && warn "All matching failed.\n";
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in EBox::Middleware::Auth::call at /usr/share/perl5/EBox/Middleware/Auth.pm line 366
363: $self->_logout($env);
364: } elsif ($self->_validateSession($env)) {
365: delete $env->{'psgix.session'}{AuthReason};
366: return $self->app->($env);
367: } else {
368: # Require authentication, redirect to the login form.
369: return $self->_redirectToLogin($env);
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in Plack::Middleware::Conditional::call at /usr/share/perl5/Plack/Middleware/Conditional.pm line 16
13: my($self, $env) = @_;
14:
15: my $app = $self->condition->($env) ? $self->middleware : $self->app;
16: return $app->($env);
17: }
18:
19: 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in EBox::WebAdmin::Middleware::SubAppAuth::call at /usr/share/perl5/EBox/WebAdmin/Middleware/SubAppAuth.pm line 57
54: }
55: }
56: }
57: return $self->app->($env);
58: }
59:
60: 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in Plack::Middleware::Session::call at /usr/share/perl5/Plack/Middleware/Session.pm line 52
49:
50: $env->{'psgix.session.options'} = { id => $id };
51:
52: my $res = $self->app->($env);
53: $self->response_cb($res, sub { $self->finalize($env, $_[0]) });
54: }
55:
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in Plack::Middleware::ReverseProxy::call at /usr/share/perl5/Plack/Middleware/ReverseProxy.pm line 68
65: }
66: }
67:
68: $self->app->($env);
69: }
70:
71: 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in (eval) at /usr/share/perl5/EBox/Middleware/UnhandledError.pm line 78
75: my $res;
76: my $caught = 0;
77: try {
78: $res = $self->app->($env);
79: } catch ($e) {
80: $caught = 1;
81: # This $res will only be used if $trace is undef
in EBox::Middleware::UnhandledError::call at /usr/share/perl5/EBox/Middleware/UnhandledError.pm line 77
74:
75: my $res;
76: my $caught = 0;
77: try {
78: $res = $self->app->($env);
79: } catch ($e) {
80: $caught = 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in (eval) at /usr/share/zentyal/psgi/zentyal.psgi line 0
1: # Copyright (C) 2010-2014 Zentyal S.L.
2: #
3: # This program is free software; you can redistribute it and/or modify
at /usr/share/zentyal/psgi/zentyal.psgi line 0
1: # Copyright (C) 2010-2014 Zentyal S.L.
2: #
3: # This program is free software; you can redistribute it and/or modify
-------------------------------------------------------------------------------------------------------------------------------------------------
What can I do? No available updates at this time for the Zentyal 4.0.
I installed the Zentyal in Hungarian language but I switched English language on the web surface. I can't add new user in English envirnonment too.
I have a fresh Zentyal 4.0 install with "Domain Controller and File Sharing" and "Openchange" modules.
I can't add new user after the first user.
I go to the "Users and Computers" -> "Manage" -> click on "Users" and I click on the green "+" sign.
On the new pop-up windows ("Add new" on the header) I filled out the "Username", "First name", "Last name" and the password fields.
I become the following error:
"Sorry, an unexpected error has occurred
root command openchange_newuser --create --enable --mail zoli@zentyal-domain.lan 'zoli' failed. Error output: params.c:pm_process() - Processing configuration file "/etc/samba/openchange.conf" params.c:pm_process() - Processing configuration file "/etc/samba/shares.conf" Traceback (most recent call last): File "/usr/sbin/openchange_newuser", line 63, in <module> lp, creds, opts.firstorg, opts.firstou) File "/usr/lib/python2.7/dist-packages/openchange/provision.py", line 156, in guess_names_from_smbconf assert(firstorg) AssertionError Command output: . Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240"
Below this message I have two buttons: "Show technical details" and "Report the problem". I reported the problem but I can't become any answer.
The technical details:
-------------------------------------------------------------------------------------------------------------------------------------------------
Error trace
root command openchange_newuser --create --enable --mail zoli@zentyal-domain.lan 'zoli' failed.
Error output: params.c:pm_process() - Processing configuration file "/etc/samba/openchange.conf"
params.c:pm_process() - Processing configuration file "/etc/samba/shares.conf"
Traceback (most recent call last):
File "/usr/sbin/openchange_newuser", line 63, in <module>
lp, creds, opts.firstorg, opts.firstou)
File "/usr/lib/python2.7/dist-packages/openchange/provision.py", line 156, in guess_names_from_smbconf
assert(firstorg)
AssertionError
Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240
in EBox::Sudo::_rootError at /usr/share/perl5/EBox/Sudo.pm line 240
237: throw EBox::Exceptions::Sudo::Wrapper("$sudocmd failed because either the current user (EUID $>) is not in sudoers files or it has incorrects settings on it. Running /usr/share/zentyal/sudoers-friendly maybe can fix this problem");
238: }
239: }
240: throw EBox::Exceptions::Sudo::Command(cmd => $cmd, output => $output, error => $error, exitValue => $exitValue)
241: }
242:
243: # Procedure: rootWithoutException
Show function arguments
in EBox::Sudo::_root at /usr/share/perl5/EBox/Sudo.pm line 210
207: if ( -r $STDERR_FILE) {
208: @error = read_file($STDERR_FILE);
209: }
210: _rootError($sudocmd, $commands, $ret, \@output, \@error);
211: }
212: }
213:
Show function arguments
in EBox::Sudo::root at /usr/share/perl5/EBox/Sudo.pm line 153
150: #
151: sub root
152: {
153: _root(1, @_);
154: }
155:
156: # Procedure: silentRoot
Show function arguments
in EBox::OpenChange::LdapUser::setAccountEnabled at /usr/share/perl5/EBox/OpenChange/LdapUser.pm line 120
117: $cmd .= " --mail $mail ";
118: }
119: $cmd .= " '$samAccountName' ";
120: EBox::Sudo::root($cmd);
121:
122: return 0;
123: }
Show function arguments
in EBox::OpenChange::LdapUser::_addUser at /usr/share/perl5/EBox/OpenChange/LdapUser.pm line 141
138: my $mailUserModel = $mail->model('MailUser');
139: return unless ($mailUserModel->enabledValue());
140:
141: $self->setAccountEnabled($user, 1);
142: }
143:
144: sub _delUserWarning
Show function arguments
in EBox::Samba::notifyModsLdapUserBase at /usr/share/perl5/EBox/Samba.pm line 2072
2069:
2070: # TODO catch errors here? Not a good idea. The way to go is
2071: # to implement full transaction support and rollback if a notified
2072: # module throws an exception
2073: $mod->$method(@{$args});
2074: }
2075:
Show function arguments
in (eval) at /usr/share/perl5/EBox/Samba/User.pm line 533
530: $res->_setFilesystemQuota($quota);
531:
532: # Call modules initialization
533: $usersMod->notifyModsLdapUserBase(
534: 'addUser', [ $res ], $res->{ignoreMods}, $res->{ignoreSlaves});
535: }
536: } catch ($error) {
in EBox::Samba::User::create at /usr/share/perl5/EBox/Samba/User.pm line 489
486:
487: my $res = undef;
488: my $entry = undef;
489: try {
490: $entry = new Net::LDAP::Entry($dn, @attr);
491: my $result = $entry->update($class->_ldap->connection());
492: if ($result->is_error()) {
Show function arguments
in EBox::Samba::CGI::AddUser::_process at /usr/share/perl5/EBox/Samba/CGI/AddUser.pm line 77
74: throw EBox::Exceptions::External(__('Passwords do not match.'));
75: }
76:
77: my $newUser = EBox::Samba::User->create(%params);
78: if ($params{group}) {
79: $newUser->addGroup(new EBox::Samba::Group(dn => $params{group}));
80: }
Show function arguments
in (eval) at /usr/share/perl5/EBox/CGI/ClientRawBase.pm line 160
157: else {
158: try {
159: $self->_validateReferer();
160: $self->_process();
161: } catch (EBox::Exceptions::DataInUse $e) {
162: if ($self->{json}) {
163: $self->setErrorFromException($e);
in EBox::CGI::ClientRawBase::run at /usr/share/perl5/EBox/CGI/ClientRawBase.pm line 158
155: $self->{redirect} = "/Login/Index";
156: }
157: else {
158: try {
159: $self->_validateReferer();
160: $self->_process();
161: } catch (EBox::Exceptions::DataInUse $e) {
Show function arguments
in (eval) at /usr/share/perl5/EBox/CGI/Run.pm line 92
89: $handler = new $classname(@extraParams);
90: }
91: }
92: $handler->run();
93: $redis->commit();
94: return $handler->response()->finalize();
95: } catch ($ex) {
in EBox::CGI::Run::run at /usr/share/perl5/EBox/CGI/Run.pm line 68
65: $redis->begin();
66:
67: my $url = $self->urlFromRequest($request);
68: try {
69: my $effectiveUrl = _urlAlias($url);
70: my @extraParams = (request => $request);
71: if ($htmlblocks) {
Show function arguments
in main::__ANON__ at /usr/share/zentyal/psgi/zentyal.psgi line 46
43: local $SIG{__WARN__} = sub { EBox::warn($_[0]) };
44:
45: my $req = Plack::Request->new($env);
46: return EBox::CGI::Run->run($req);
47: };
48:
49: my $builder = new Plack::Builder();
Show function arguments
in Plack::App::URLMap::call at /usr/share/perl5/Plack/App/URLMap.pm line 71
68: return $self->response_cb($app->($env), sub {
69: $env->{PATH_INFO} = $orig_path_info;
70: $env->{SCRIPT_NAME} = $orig_script_name;
71: });
72: }
73:
74: DEBUG && warn "All matching failed.\n";
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in EBox::Middleware::Auth::call at /usr/share/perl5/EBox/Middleware/Auth.pm line 366
363: $self->_logout($env);
364: } elsif ($self->_validateSession($env)) {
365: delete $env->{'psgix.session'}{AuthReason};
366: return $self->app->($env);
367: } else {
368: # Require authentication, redirect to the login form.
369: return $self->_redirectToLogin($env);
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in Plack::Middleware::Conditional::call at /usr/share/perl5/Plack/Middleware/Conditional.pm line 16
13: my($self, $env) = @_;
14:
15: my $app = $self->condition->($env) ? $self->middleware : $self->app;
16: return $app->($env);
17: }
18:
19: 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in EBox::WebAdmin::Middleware::SubAppAuth::call at /usr/share/perl5/EBox/WebAdmin/Middleware/SubAppAuth.pm line 57
54: }
55: }
56: }
57: return $self->app->($env);
58: }
59:
60: 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in Plack::Middleware::Session::call at /usr/share/perl5/Plack/Middleware/Session.pm line 52
49:
50: $env->{'psgix.session.options'} = { id => $id };
51:
52: my $res = $self->app->($env);
53: $self->response_cb($res, sub { $self->finalize($env, $_[0]) });
54: }
55:
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in Plack::Middleware::ReverseProxy::call at /usr/share/perl5/Plack/Middleware/ReverseProxy.pm line 68
65: }
66: }
67:
68: $self->app->($env);
69: }
70:
71: 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in (eval) at /usr/share/perl5/EBox/Middleware/UnhandledError.pm line 78
75: my $res;
76: my $caught = 0;
77: try {
78: $res = $self->app->($env);
79: } catch ($e) {
80: $caught = 1;
81: # This $res will only be used if $trace is undef
in EBox::Middleware::UnhandledError::call at /usr/share/perl5/EBox/Middleware/UnhandledError.pm line 77
74:
75: my $res;
76: my $caught = 0;
77: try {
78: $res = $self->app->($env);
79: } catch ($e) {
80: $caught = 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in (eval) at /usr/share/zentyal/psgi/zentyal.psgi line 0
1: # Copyright (C) 2010-2014 Zentyal S.L.
2: #
3: # This program is free software; you can redistribute it and/or modify
at /usr/share/zentyal/psgi/zentyal.psgi line 0
1: # Copyright (C) 2010-2014 Zentyal S.L.
2: #
3: # This program is free software; you can redistribute it and/or modify
-------------------------------------------------------------------------------------------------------------------------------------------------
What can I do? No available updates at this time for the Zentyal 4.0.
I installed the Zentyal in Hungarian language but I switched English language on the web surface. I can't add new user in English envirnonment too.
6
Magyar / Re: Zentyal 4.0 - Hitelesítésszolgáltató - hiba [MEGOLDVA]
« on: November 05, 2014, 12:35:37 pm »
Köszönöm szépen a tanácsot!
7
Magyar / Zentyal 4.0 - új felhasználó felvétele - sikertelen
« on: November 05, 2014, 11:29:15 am »
Sziasztok!
Nem tudom, futottatok-e már bele ilyenbe, friss zentyal 4.0 telepítés, egy usert sikerült felvennem, a többit már nem. Nincs ékezetes betű a felhasználói névben, a családi és kerersztnévben sem, nem rendelem hozzá csoporthoz, hozzáadáskor ezt a hibaüzenetet kapom:
"Sorry, an unexpected error has occurred
root command openchange_newuser --create --enable --mail gabor@zentyal-domain.lan 'gabor' failed. Error output: params.c:pm_process() - Processing configuration file "/etc/samba/openchange.conf" params.c:pm_process() - Processing configuration file "/etc/samba/shares.conf" Traceback (most recent call last): File "/usr/sbin/openchange_newuser", line 63, in <module> lp, creds, opts.firstorg, opts.firstou) File "/usr/lib/python2.7/dist-packages/openchange/provision.py", line 156, in guess_names_from_smbconf assert(firstorg) AssertionError Command output: . Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240"
Alatta van kég gombom:
"Show technical details" és "Report problem"
Az elsőre kattintva kapok ilyet:
root command openchange_newuser --create --enable --mail gabor@zentyal-domain.lan 'gabor' failed.
Error output: params.c:pm_process() - Processing configuration file "/etc/samba/openchange.conf"
params.c:pm_process() - Processing configuration file "/etc/samba/shares.conf"
Traceback (most recent call last):
File "/usr/sbin/openchange_newuser", line 63, in <module>
lp, creds, opts.firstorg, opts.firstou)
File "/usr/lib/python2.7/dist-packages/openchange/provision.py", line 156, in guess_names_from_smbconf
assert(firstorg)
AssertionError
Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240
A hibajelentést elküldtem a másik gombbal már két napja, de semmi reakció
Más hiba miatt már angolra állítottam a Zentyal webadmin felületét, így gyanítom, nem nyelvi probléma okozza ezt.
Van valami javaslatotok, ötletetek?
Update: Active directory and file sharing és Openchange modulok vannak csak telepítve, úgy látom, mintha az Openchange váltaná ki ezt a hibát...
Nem tudom, futottatok-e már bele ilyenbe, friss zentyal 4.0 telepítés, egy usert sikerült felvennem, a többit már nem. Nincs ékezetes betű a felhasználói névben, a családi és kerersztnévben sem, nem rendelem hozzá csoporthoz, hozzáadáskor ezt a hibaüzenetet kapom:
"Sorry, an unexpected error has occurred
root command openchange_newuser --create --enable --mail gabor@zentyal-domain.lan 'gabor' failed. Error output: params.c:pm_process() - Processing configuration file "/etc/samba/openchange.conf" params.c:pm_process() - Processing configuration file "/etc/samba/shares.conf" Traceback (most recent call last): File "/usr/sbin/openchange_newuser", line 63, in <module> lp, creds, opts.firstorg, opts.firstou) File "/usr/lib/python2.7/dist-packages/openchange/provision.py", line 156, in guess_names_from_smbconf assert(firstorg) AssertionError Command output: . Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240"
Alatta van kég gombom:
"Show technical details" és "Report problem"
Az elsőre kattintva kapok ilyet:
root command openchange_newuser --create --enable --mail gabor@zentyal-domain.lan 'gabor' failed.
Error output: params.c:pm_process() - Processing configuration file "/etc/samba/openchange.conf"
params.c:pm_process() - Processing configuration file "/etc/samba/shares.conf"
Traceback (most recent call last):
File "/usr/sbin/openchange_newuser", line 63, in <module>
lp, creds, opts.firstorg, opts.firstou)
File "/usr/lib/python2.7/dist-packages/openchange/provision.py", line 156, in guess_names_from_smbconf
assert(firstorg)
AssertionError
Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240
A hibajelentést elküldtem a másik gombbal már két napja, de semmi reakció
Más hiba miatt már angolra állítottam a Zentyal webadmin felületét, így gyanítom, nem nyelvi probléma okozza ezt.
Van valami javaslatotok, ötletetek?
Update: Active directory and file sharing és Openchange modulok vannak csak telepítve, úgy látom, mintha az Openchange váltaná ki ezt a hibát...
8
Magyar / Re: Zentyal 4.0 - Hitelesítésszolgáltató - hiba
« on: November 03, 2014, 02:49:54 pm »
Elképesztő! - Angolul simán beveszi...
Köszi a tippet!
Köszi a tippet!
9
Magyar / Zentyal 4.0 - Hitelesítésszolgáltató - hiba [MEGOLDVA]
« on: November 03, 2014, 12:58:58 pm »
Sziasztok!
Gondom akadt. Feltettem egy 4.0-ás Zentyal-t, Tartományvezérlő, Groupware modulokat választottam ki.
Felment szépen, hiba nélkül, frissítettem, változtatott mentések nincsenek.
Hitelesítésszolgáltató - Általános - bármi komolyabb dologba kezdenék, ide irányít, gondolom legyen tanúsítványom.
Öt mező van:
Szervezet neve
Országkód (elhagyható)
Város (elhagyható)
Állapot (gondolom állam, state angolul, pár verzióval korábban is megvolt már ez a félrefordítás....) (elhagyható)
Napok száma a lejáratig
Bármit és bárhogyan próbálok ide beírni, mindig ezt kapom felül piros alapon - és persze nem készül el:
"Érvénytelen érték: commonName: infostation szolgáltató tanúsítványa. A mező érvénytelen karaktereket tartalmaz. Minden ASCII alfanumerikus, és a következő nem alfanumerikus karakterek engedélyezettek: .?&+:-@* és a szóköz."
Hát... az első mezőbe ezeket próbáltam beírni cegnev, cegnev.hu, hagytam üresen is (persze elvileg nem lehetne, tudom)
A második mezőbe, országkód, alapból az US-t teszi, írtam már át HU-ra, hagytam US-en, nincs változás.
A város és állapot alapból "undefined" szöveggel van kitöltve, töltöttem már ki, hagytam beírva az undefined-et, hagytam üresen is, nincs változás...
A napok száma lejáratig mező 3650-el van kitöltve, próbáltam csak 365-re venni, de semmi....
Mit csinálok rosszul?
Ha nem csinálok semmit sem rosszul, akkor hogyan tudnám javítani, vagy megkerülni ezt a problémát?
Gondom akadt. Feltettem egy 4.0-ás Zentyal-t, Tartományvezérlő, Groupware modulokat választottam ki.
Felment szépen, hiba nélkül, frissítettem, változtatott mentések nincsenek.
Hitelesítésszolgáltató - Általános - bármi komolyabb dologba kezdenék, ide irányít, gondolom legyen tanúsítványom.
Öt mező van:
Szervezet neve
Országkód (elhagyható)
Város (elhagyható)
Állapot (gondolom állam, state angolul, pár verzióval korábban is megvolt már ez a félrefordítás....) (elhagyható)
Napok száma a lejáratig
Bármit és bárhogyan próbálok ide beírni, mindig ezt kapom felül piros alapon - és persze nem készül el:
"Érvénytelen érték: commonName: infostation szolgáltató tanúsítványa. A mező érvénytelen karaktereket tartalmaz. Minden ASCII alfanumerikus, és a következő nem alfanumerikus karakterek engedélyezettek: .?&+:-@* és a szóköz."
Hát... az első mezőbe ezeket próbáltam beírni cegnev, cegnev.hu, hagytam üresen is (persze elvileg nem lehetne, tudom)
A második mezőbe, országkód, alapból az US-t teszi, írtam már át HU-ra, hagytam US-en, nincs változás.
A város és állapot alapból "undefined" szöveggel van kitöltve, töltöttem már ki, hagytam beírva az undefined-et, hagytam üresen is, nincs változás...
A napok száma lejáratig mező 3650-el van kitöltve, próbáltam csak 365-re venni, de semmi....
Mit csinálok rosszul?
Ha nem csinálok semmit sem rosszul, akkor hogyan tudnám javítani, vagy megkerülni ezt a problémát?
10
Magyar / Openchange tapasztalatok?
« on: October 21, 2014, 02:31:43 pm »
Sziasztok!
Utoljára akkor nézegettem a Zenytal-t csoportmunkás levelezésre, amikor az még csak a Zarafa-t használta.
Azóta hallottam már az Openchange-ről, bele is került a Zentyal-ba, érdeklődnék, van-e gyakorlati tapasztalatotok vele? Vannak-e ismert hibák, hiányosságok? Milyen a webes felülete, mennyire használhatóak a közös, vagy megosztott naptárak, címjegyzékek, feladatlisták, mobil eszközökkel hogyan működik együtt,...?
Utoljára akkor nézegettem a Zenytal-t csoportmunkás levelezésre, amikor az még csak a Zarafa-t használta.
Azóta hallottam már az Openchange-ről, bele is került a Zentyal-ba, érdeklődnék, van-e gyakorlati tapasztalatotok vele? Vannak-e ismert hibák, hiányosságok? Milyen a webes felülete, mennyire használhatóak a közös, vagy megosztott naptárak, címjegyzékek, feladatlisták, mobil eszközökkel hogyan működik együtt,...?
11
Magyar / Re: zentyal3.3 openchange
« on: January 03, 2014, 11:24:43 pm »
Értem. És a címjegyzék? Feladatlista?
Ha a webapp és a roundcube nem megy el egymás mellett, annyira szerintem nem nagy baj, vagy Zarafa, vagy OpenChange, nem?
Ha a webapp és a roundcube nem megy el egymás mellett, annyira szerintem nem nagy baj, vagy Zarafa, vagy OpenChange, nem?
12
Magyar / Re: Felhasználó törlődött!!
« on: December 27, 2013, 09:12:28 pm »
Van valami javulás, vagy fejlemény e téren?
13
Magyar / Re: zentyal3.3 openchange
« on: December 27, 2013, 09:10:46 pm »
Ez engem is érdekelne, de nem igazán értem, hogy van ez. A webmail felületet mi adja ilyenkor?
14
Magyar / Re: .forward file használata
« on: October 23, 2013, 12:14:51 pm »nincs ilyen sor, de a /usr/bin/procmail sem létezik.
Akkor tedd fel: sudo apt-get install procmail
Majd tedd bele a sort a main.cf-be.
15
Magyar / Re: .forward file használata
« on: October 22, 2013, 04:25:16 pm »Szia,
A user home könyvtárába elhelyezett .forward file-t figyelmen kívül hagyja a postfix (Zentyal 3.2). Hogyan tudom rávenni, hogy használja, vagy mi módon tudom forwardolni a leveleket?
Üdv.:
Oláh Józsi
A main.cf fájlban szerepelnie kell ennek a sornak ahhoz, hogy az ilyen .vacation, .forward fájlok feldolgozásra kerülhessenek. Lehet még jogosultság buktató is, de kezdjük ezzel, van ilyened?
mailbox_command = /usr/bin/procmail
Illetve ha a mailbox_command sorod van, csak más a vége, akkor ilyen legyen. (Nincs most "előttem" Zenytal, hogy megnézzem, mi is van nála beállítva, de eleve csak 3.0-ás lenne).