Zentyal Forum, Linux Small Business Server

News and Announcements => News and Announcements => Topic started by: J. A. Calvo on September 19, 2013, 09:13:14 am

Title: Zentyal 3.2 available!
Post by: J. A. Calvo on September 19, 2013, 09:13:14 am
Hello,

The Zentyal Development Team proudly presents Zentyal 3.2, a new stable version the Linux small business server!

Zentyal Server 3.2 offers greater Samba integration, featuring support for Group Policy Objects (GPOs) and Organizational Units (OUs) in the Samba, Proxy, Mail and Zarafa modules. It also comes with improved security guaranteeing safe mobile communications due to the integration of L2TP support in the IPsec module and new Intrusion Prevention module based on Suricata.

In addition, significant usability improvements - such as migration from JavaScript Prototype framework to jQuery, Single Click Support to enable modules and dependencies, Headless mode, etc. - have taken place as well, making Zentyal Server GUI much faster and easier to use. Moreover, the upgrade from an existing Zentyal 3.0 installation is very easy and only requires a few commands to be executed.

You can check out all the details in the official announcement:

http://trac.zentyal.org/wiki/Document/Announcement/3.2

This brand new stable version is available for download at:

http://www.zentyal.org/download

We're looking forward to receiving your feedback! Remember that Zentyal Summit 2013 (http://summit.zentyal.com/) (Oct. 3 and 4, Zaragoza, Spain) offers an excellent opportunity to learn more from the Zentyal Server 3.2 release and to give your feedback on-site!

Finally, don't forget to spread the word about these great news! Check out the official press releases (http://www.zentyal.com/press-resources/) (available in English and Spanish).
Title: Re: Zentyal 3.2 available!
Post by: Escorpiom on September 19, 2013, 07:34:47 pm
Congratulations! The faster admin interface is very much appreciated.
Going to read up on the changes and I just may take the plunge.
Is 3.2 still doing the double LDAP sync thing?
Is DHCP on virtual interfaces permitted?
Does the firewall no longer hang on adding large blocks of IP addresses?

Cheers.
Title: Re: Zentyal 3.2 available!
Post by: robb on September 19, 2013, 09:26:21 pm
Congratulations on this milestone. I already updated my homeserver from 3.1 beta to 3.2 and it went flawless.
I am curious to hear about reports of a 3.0 server updated to 3.2 works as smooth.

What I see this far is very to my liking.
Using Likewise-open to join an Ubuntu client to the Samba domain works like a charm.

great work.

@Escorpiom: afaik there is still a sync between Zentyal LDAP and Samba4 LDAP. Unfortunately you can not use DHCP on a virtual interface.
Title: Re: Zentyal 3.2 available!
Post by: jerry_maori on September 20, 2013, 04:11:51 am
Samba failed to upgrade from 3.0 to 3.2
My solution was: remove it using apt-get and the reinstalling using apt-get.
Profiles were lost:(
Title: Re: Zentyal 3.2 available!
Post by: mpnegro on September 20, 2013, 10:43:32 am
I've the same problem on my test server. I don't yet do what you have done, but upgrades from 3.0 to 3.2 are not working  correct.
Title: Re: Zentyal 3.2 available!
Post by: ian on September 20, 2013, 07:03:11 pm
Hello,

I have tested upgrading to the new 3.2 release from previous versions.

1) Upgrade from the latest beta release 3.1.13
You must be root to do it.
Adapt the file sources.list in the map /etc/apt/sources.list and change the release references of the Zentyal links to 3.2
deb http://ppa.launchpad.net/zentyal/3.1/ubuntu precise main
change to:
deb http://ppa.launchpad.net/zentyal/3.2/ubuntu precise main
and:
deb http://archive.zentyal.org/zentyal 3.1 main extra
change to:
deb http://archive.zentyal.org/zentyal 3.2 main extra

execute the next commands:
apt-get update
apt-get upgrade
Afther a reboot, the upgrade is now finished and the server runs now release 3.2

Remarque:
In the administration GUI, there is still Zentyal Community Edition Beta in the logo on top.

2) Upgrade from release 3.0.29
You must be root to do it.
Adapt the file sources.list in the map /etc/apt/sources.list and change the release references of the Zentyal links to 3.2
deb http://ppa.launchpad.net/zentyal/3.0/ubuntu precise main
change to:
deb http://ppa.launchpad.net/zentyal/3.2/ubuntu precise main
and:
deb http://archive.zentyal.org/zentyal 3.0 main extra
change to:
deb http://archive.zentyal.org/zentyal 3.2 main extra

execute the next commands:
apt-get update
apt-get dist-upgrade
Afther a reboot, the upgrade is now finished and the server runs now release 3.2

Remarque:
Starting the administration GUI in Firefox the first time may result in not correctly showing the pages, reloading the pages solve this problem from then the menus appear correct.
The user administrator is not showed anymore , this is a domain administrator, i use this account to join windows clients in the domain. I now it is easy to define a new domain administrator account, but the administrator account is still there but can not be used anymore so zentyal delite it or show it.
In the administration GUI the option Printer Sharing , starting cups from this menu is not wrking anymore while it was ok in release 3.0. It is a problem with the link it works with http://localhost:631 but not with http://servername:631. Servername is the naam of the server, i have made a ticket for the error but zentyal find it not needed to improve it.

Best regards,
Ian
Title: Re: Zentyal 3.2 available!
Post by: mpnegro on September 20, 2013, 07:07:56 pm
I did this way :

sudo sed -ri 's/zentyal(.)3.0/zentyal\13.2/g' /etc/apt/sources.list
sudo apt-get update
sudo apt-get dist-upgrade

this what the Zentyal tells to do.

Title: Re: Zentyal 3.2 available!
Post by: Escorpiom on September 20, 2013, 07:11:45 pm
Thanks Ian for the explanation, it seems easy to do.
One question: Where did you get Zentyal 3.0.29?
I have only seen Zentyal up to 3.0.27, what did I miss?

Cheers. 
Title: Re: Zentyal 3.2 available!
Post by: ian on September 20, 2013, 07:14:14 pm
Hello Escorpion,

You are rigth , i made a mistake it is indeed 3.0.27 the latest release .

Best regards,
Ian
Title: Re: Zentyal 3.2 available!
Post by: mpjoe2000 on September 20, 2013, 09:19:35 pm
i have just downloaded Zentyal 3.2 ISO 32bits, just check the filenames in the screenshot i've attached!!!
Title: Re: Zentyal 3.2 available!
Post by: netteszt on September 22, 2013, 07:05:53 pm
I have a problem after upgrading from 3.0.latest to 3.2.
My Dashboard send this message after login:
FATAL: Couldn't connect to LDAP server ldapi://%2fvar%2frun%2fslapd%2fldapi: connect: Connection refused

The following packages do not upgraded :-(

zentyal-users
 zentyal-mail
 zentyal-mailfilter
 zentyal-samba
 zentyal-zarafa
 zentyal-ftp
 zentyal-webmail

Can anyone help me ?
I tried to remove those packages and reinstall, but no result..
Title: Re: Zentyal 3.2 available!
Post by: BrettonWoods on September 24, 2013, 11:17:24 pm
Hey Guys,

Top notch, absolutely brilliant.

Forget 3.0 woes, 3.2 rocks.

Well done as the Zentyal team deserved something as perfect as this.

:)

Title: Re: Zentyal 3.2 available!
Post by: netteszt on September 25, 2013, 07:51:24 am
3.2 Fresh install and samba do not work... this release is not good.
Title: Re: Zentyal 3.2 available!
Post by: mpnegro on September 25, 2013, 09:54:27 am
have you tried the new file manager update?
Title: Re: Zentyal 3.2 available!
Post by: BrettonWoods on September 25, 2013, 01:48:53 pm
I installed 3.2 from scratch. Haven't connected the network clients yet. File manger has updated last night.

So far for me everything is going well and this release is much better than 3.0.

Its only just been released so still a bit bleeding edge but from first looks, it looks good. Really good actually.

Thats just my impression.
Title: Re: Zentyal 3.2 available!
Post by: mpjoe2000 on September 26, 2013, 01:01:59 am
3.2 Fresh install and samba do not work... this release is not good.

I'm having problems with samba too!!!
My ingredients:

It seems that after clamav gets udpated zentyal samba scripts starts to working unstable.

This samba issue is not an impression.... it is fact!
maybe on 64bit release there's not that issue.
Title: Re: Zentyal 3.2 available!
Post by: BrettonWoods on September 26, 2013, 01:36:38 am
3,2 64 Working fine so far apart from SSO with proxy.

Title: Re: Zentyal 3.2 available!
Post by: thebovees on September 26, 2013, 04:05:02 am
When I attempted to upgrade for 3.0.27 per instructions and upon entering;
"sudo apt-get update"
I get back;
"E: Type '/zentyal(.)3.0/zentyal13.2/g' is not known on line 2 in source list /etc/apt/sources.list
E: The list of sources could not be read."
What did I do wrong?
Title: Re: Zentyal 3.2 available!
Post by: toolman1967 on September 26, 2013, 04:36:21 am
When I attempted to upgrade for 3.0.27 per instructions and upon entering;
"sudo apt-get update"
I get back;
"E: Type '/zentyal(.)3.0/zentyal13.2/g' is not known on line 2 in source list /etc/apt/sources.list
E: The list of sources could not be read."
What did I do wrong?

run this command from terminal sudo sed -ri 's/zentyal(.)3.0/zentyal\13.2/g' /etc/apt/sources.list or go just go in and edit the sources.list find zentyal 3.0 and replace with 3.2 than apt-get update and sudo apt-get dist-upgrade should now get the new packages to upgrade to 3.2
Title: Re: Zentyal 3.2 available!
Post by: thebovees on September 27, 2013, 04:44:06 am
When I attempted to upgrade for 3.0.27 per instructions and upon entering;
"sudo apt-get update"
I get back;
"E: Type '/zentyal(.)3.0/zentyal13.2/g' is not known on line 2 in source list /etc/apt/sources.list
E: The list of sources could not be read."
What did I do wrong?

run this command from terminal sudo sed -ri 's/zentyal(.)3.0/zentyal\13.2/g' /etc/apt/sources.list or go just go in and edit the sources.list find zentyal 3.0 and replace with 3.2 than apt-get update and sudo apt-get dist-upgrade should now get the new packages to upgrade to 3.2

That is just what I did and everytime I do "sudo apt-get update" I get the same response.  My fear is that I mistyped the command you suggested on my first attempt to upgrade and corrupted the /etc/apt/sources.list file and can't or don't know how to go back.  Any help?  What should the Sources.list file look like?
Title: Re: Zentyal 3.2 available!
Post by: toolman1967 on September 27, 2013, 05:36:47 am
When I attempted to upgrade for 3.0.27 per instructions and upon entering;
"sudo apt-get update"
I get back;
"E: Type '/zentyal(.)3.0/zentyal13.2/g' is not known on line 2 in source list /etc/apt/sources.list
E: The list of sources could not be read."
What did I do wrong?

run this command from terminal sudo sed -ri 's/zentyal(.)3.0/zentyal\13.2/g' /etc/apt/sources.list or go just go in and edit the sources.list find zentyal 3.0 and replace with 3.2 than apt-get update and sudo apt-get dist-upgrade should now get the new packages to upgrade to 3.2

That is just what I did and everytime I do "sudo apt-get update" I get the same response.  My fear is that I mistyped the command you suggested on my first attempt to upgrade and corrupted the /etc/apt/sources.list file and can't or don't know how to go back.  Any help?  What should the Sources.list file look like?


Edit the sources.list look for the following two lines below or simlar.
Once that you have found the bad lines remove them
deb http://ppa.launchpad.net/zentyal/3.0/ubuntu precise main

deb http://archive.zentyal.org/zentyal 3.0 main extra

Replace them with the following two lines:

deb http://ppa.launchpad.net/zentyal/3.2/ubuntu precise main

deb http://archive.zentyal.org/zentyal 3.2 main extra

now from terminal window
sudo apt-get update  sudo apt-get dist-upgrade should now get the new packages to upgrade to 3.2
Title: Re: Zentyal 3.2 available!
Post by: thebovees on September 27, 2013, 07:17:57 am
When I attempted to upgrade for 3.0.27 per instructions and upon entering;
"sudo apt-get update"
I get back;
"E: Type '/zentyal(.)3.0/zentyal13.2/g' is not known on line 2 in source list /etc/apt/sources.list
E: The list of sources could not be read."
What did I do wrong?

run this command from terminal sudo sed -ri 's/zentyal(.)3.0/zentyal\13.2/g' /etc/apt/sources.list or go just go in and edit the sources.list find zentyal 3.0 and replace with 3.2 than apt-get update and sudo apt-get dist-upgrade should now get the new packages to upgrade to 3.2

That is just what I did and everytime I do "sudo apt-get update" I get the same response.  My fear is that I mistyped the command you suggested on my first attempt to upgrade and corrupted the /etc/apt/sources.list file and can't or don't know how to go back.  Any help?  What should the Sources.list file look like?


Edit the sources.list look for the following two lines below or simlar.
Once that you have found the bad lines remove them
deb http://ppa.launchpad.net/zentyal/3.0/ubuntu precise main

deb http://archive.zentyal.org/zentyal 3.0 main extra

Replace them with the following two lines:

deb http://ppa.launchpad.net/zentyal/3.2/ubuntu precise main

deb http://archive.zentyal.org/zentyal 3.2 main extra

now from terminal window
sudo apt-get update  sudo apt-get dist-upgrade should now get the new packages to upgrade to 3.2

I found the two lines specified and edited them in nano, and saved.  Ran "Sudo apt-get update" and again the same results.  While looking at the sources.list file I noticed that every other line plus read "/zentyal(.)3.0/zentyal13.2/g".  I thought this was odd but don't know what an actual sources.list file should look like.

Thanks again for your help.
Title: Re: Zentyal 3.2 available!
Post by: toolman1967 on September 27, 2013, 06:08:24 pm
When I attempted to upgrade for 3.0.27 per instructions and upon entering;
"sudo apt-get update"
I get back;
"E: Type '/zentyal(.)3.0/zentyal13.2/g' is not known on line 2 in source list /etc/apt/sources.list
E: The list of sources could not be read."
What did I do wrong?

run this command from terminal sudo sed -ri 's/zentyal(.)3.0/zentyal\13.2/g' /etc/apt/sources.list or go just go in and edit the sources.list find zentyal 3.0 and replace with 3.2 than apt-get update and sudo apt-get dist-upgrade should now get the new packages to upgrade to 3.2

That is just what I did and everytime I do "sudo apt-get update" I get the same response.  My fear is that I mistyped the command you suggested on my first attempt to upgrade and corrupted the /etc/apt/sources.list file and can't or don't know how to go back.  Any help?  What should the Sources.list file look like?


Edit the sources.list look for the following two lines below or simlar.
Once that you have found the bad lines remove them
deb http://ppa.launchpad.net/zentyal/3.0/ubuntu precise main

deb http://archive.zentyal.org/zentyal 3.0 main extra

Replace them with the following two lines:

deb http://ppa.launchpad.net/zentyal/3.2/ubuntu precise main

deb http://archive.zentyal.org/zentyal 3.2 main extra

now from terminal window
sudo apt-get update  sudo apt-get dist-upgrade should now get the new packages to upgrade to 3.2

I found the two lines specified and edited them in nano, and saved.  Ran "Sudo apt-get update" and again the same results.  While looking at the sources.list file I noticed that every other line plus read "/zentyal(.)3.0/zentyal13.2/g".  I thought this was odd but don't know what an actual sources.list file should look like.

Thanks again for your help.

I have attached my source.list file from Zentyal 3.0 server
Title: Re: Zentyal 3.2 available!
Post by: thebovees on September 27, 2013, 08:13:45 pm
When I attempted to upgrade for 3.0.27 per instructions and upon entering;
"sudo apt-get update"
I get back;
"E: Type '/zentyal(.)3.0/zentyal13.2/g' is not known on line 2 in source list /etc/apt/sources.list
E: The list of sources could not be read."
What did I do wrong?

run this command from terminal sudo sed -ri 's/zentyal(.)3.0/zentyal\13.2/g' /etc/apt/sources.list or go just go in and edit the sources.list find zentyal 3.0 and replace with 3.2 than apt-get update and sudo apt-get dist-upgrade should now get the new packages to upgrade to 3.2

That is just what I did and everytime I do "sudo apt-get update" I get the same response.  My fear is that I mistyped the command you suggested on my first attempt to upgrade and corrupted the /etc/apt/sources.list file and can't or don't know how to go back.  Any help?  What should the Sources.list file look like?


Edit the sources.list look for the following two lines below or simlar.
Once that you have found the bad lines remove them
deb http://ppa.launchpad.net/zentyal/3.0/ubuntu precise main

deb http://archive.zentyal.org/zentyal 3.0 main extra

Replace them with the following two lines:

deb http://ppa.launchpad.net/zentyal/3.2/ubuntu precise main

deb http://archive.zentyal.org/zentyal 3.2 main extra

now from terminal window
sudo apt-get update  sudo apt-get dist-upgrade should now get the new packages to upgrade to 3.2

I found the two lines specified and edited them in nano, and saved.  Ran "Sudo apt-get update" and again the same results.  While looking at the sources.list file I noticed that every other line plus read "/zentyal(.)3.0/zentyal13.2/g".  I thought this was odd but don't know what an actual sources.list file should look like.

Thanks again for your help.

I have attached my source.list file from Zentyal 3.0 server

THANKS!
Your file confirmed my suspicions of the multiple extrainous lines.  I deleted them and bingo, all working.
Thanks again, Roger
Title: Re: Zentyal 3.2 available!
Post by: holtandrei on November 23, 2013, 07:09:48 pm
I want to congradulate the Zentyal TEAM, for a LINUX based SBS is the best, especialy for me, comming from Microsoft based servers ( ISA and TMG )

If you could manage to have a Reverse Proxy module and DNS sync, it will decimate all

No problems upgrading from 3.0 ( x64 )
Zentyal is installed as a VM - works like a charm ( 2 cpu-s and 2 gb ram )