Recent Posts
41
German / Re: Zentyal 7.1 Erfahrungen
« Last post by markus.neubauer on March 21, 2024, 01:00:07 pm »kannst Du dies bitte näher erläutern? Wird info@... in den anderen Postfächern nicht angezeigt oder die Mails nicht dahin kopiert?
Wenn ich mich recht entsinne steuert das postfix und nicht SoGO. In Postfix muss dann nur ein entsprechender alias angelegt werden, mit den Empfängern.
Ich meine damit, dass man ein Postfach nicht mehr delegieren kann. Ich meine mich zu erinnern, dass das in einer früheren Version möglich war.
Beispiel: Sekretärin kann die Mails von Chef sehen. Quasi shared Postfach oder Shared/Öffentlicher Order im MS Sprech.
Postfix steuert nicht den Zugriff auf die Postfächer, dass wird von Dovecot verwaltet. Mit Postfix kannst Du Mails replizieren mittels verschiedener Wege alias, bcc etc.
42
Installation and Upgrades / Install Zentyal 8.0 development illegal OPcode
« Last post by striker775 on March 12, 2024, 04:45:10 pm »I tried to install Zentyal 8.0 development on HP DL380 G6 running a raid 50 w/ usb. So right from boot it came up illegal OPcode. I had to first install Ubuntu server 22.0.4 and then install Zentyal on top to get it to work. I downloaded Zentyal dev from Zentyal website.
43
Spanish / Re: Zentyal 8 en LXC (Contenedor ProxMox)
« Last post by gose on March 11, 2024, 11:01:30 pm »Bueeenas,
Gracias por la ayuda, si me dices que mejor no usar un contenedor pues no me voy a matar y me voy directo a una VM, no quiero problemas y prefiero lo seguro, ahora mismo tengo un Zentyal 3.5 que virtualicé de una máquina fisica y tengo que cambiarlo, este a pesar de ser antiguo va funcionando.
Probaremos con el 8 entonces en VM, aqui ya no hay problema, la idea es también cambiar un controlador de dominio Windows por el de Zentyal, intenté migrarlo hace un año pero es que fué imposible, si no fallaba por un sitio fallaba por otro, a ver si montando desde cero y llevando el curro de añadir máquinas el dominio no tengo problemas.
Gracias de nuevo!
Gracias por la ayuda, si me dices que mejor no usar un contenedor pues no me voy a matar y me voy directo a una VM, no quiero problemas y prefiero lo seguro, ahora mismo tengo un Zentyal 3.5 que virtualicé de una máquina fisica y tengo que cambiarlo, este a pesar de ser antiguo va funcionando.
Probaremos con el 8 entonces en VM, aqui ya no hay problema, la idea es también cambiar un controlador de dominio Windows por el de Zentyal, intenté migrarlo hace un año pero es que fué imposible, si no fallaba por un sitio fallaba por otro, a ver si montando desde cero y llevando el curro de añadir máquinas el dominio no tengo problemas.
Gracias de nuevo!
44
News and Announcements / Re: Zentyal 8.0 available!
« Last post by Daniel Joven on March 08, 2024, 05:52:38 pm »Hi all,
The Zentyal Development Team is glad to announce that Zentyal 8.0 is available for download now!
This is a new major release of the Zentyal Linux Server. This version is based on Ubuntu Server 22.04.3 LTS. This version comes with the most recent versions of all the integrated software, including Samba 4.15.13, Netplan instead of the old-fashioned network/interfaces, new Docker and Webserver modules, and finally the latest stable SOGo version.
This new version is available for download at:
https://download02.public.zentyal.com/zentyal-8.0-development-amd64.iso
https://download02.public.zentyal.com/zentyal-8.0-development-amd64.iso.md5
You can find out all the details in the official announcement and changelog:
https://zentyal.com/news/zentyal-server-8-0-development-now-available
https://zentyal.com/news/zentyal-8-0-changelog
If you hit any issues, please do report via GitHub: https://github.com/zentyal/zentyal/issues
Looking forward to receiving your feedback and comments!
Good work! When is it planed for upgrading from 7.1 to 8.0
Hi,
We plan to release the script and update the documentation this month. As soon as it is available, to will create a new topic and pin it.
45
Spanish / Re: Zentyal 8 en LXC (Contenedor ProxMox)
« Last post by Daniel Joven on March 08, 2024, 05:50:57 pm »Buenas tardes,
Según el log que has mostrado, el error está en el script de post-instalación del paquete zentyal-core :
Podrías tratar de ejecutar el script manualmente usando el modo debug para ver si detectas qué parte en concreto del código está fallando, aunque te advierto que Zentyal no ha sido desarrollado para ser ejecutado en un contenedor.
NOTA: En el siguiente enlace tiene el contenido del script por si prefieres debuarlo desde el propio GitHub.
- https://github.com/zentyal/zentyal/blob/master/main/core/debian/zentyal-core.postinst
Un saludo.
Según el log que has mostrado, el error está en el script de post-instalación del paquete zentyal-core :
Code: [Select]
installed zentyal-core package post-installation script subprocess returned error exit status 2
Podrías tratar de ejecutar el script manualmente usando el modo debug para ver si detectas qué parte en concreto del código está fallando, aunque te advierto que Zentyal no ha sido desarrollado para ser ejecutado en un contenedor.
Code: [Select]
sudo bash -x /var/lib/dpkg/info/zentyal-core.postinst
NOTA: En el siguiente enlace tiene el contenido del script por si prefieres debuarlo desde el propio GitHub.
- https://github.com/zentyal/zentyal/blob/master/main/core/debian/zentyal-core.postinst
Un saludo.
46
News and Announcements / Re: Zentyal 8.0 available!
« Last post by Luke on March 06, 2024, 11:04:35 am »Hi all,
The Zentyal Development Team is glad to announce that Zentyal 8.0 is available for download now!
This is a new major release of the Zentyal Linux Server. This version is based on Ubuntu Server 22.04.3 LTS. This version comes with the most recent versions of all the integrated software, including Samba 4.15.13, Netplan instead of the old-fashioned network/interfaces, new Docker and Webserver modules, and finally the latest stable SOGo version.
This new version is available for download at:
https://download02.public.zentyal.com/zentyal-8.0-development-amd64.iso
https://download02.public.zentyal.com/zentyal-8.0-development-amd64.iso.md5
You can find out all the details in the official announcement and changelog:
https://zentyal.com/news/zentyal-server-8-0-development-now-available
https://zentyal.com/news/zentyal-8-0-changelog
If you hit any issues, please do report via GitHub: https://github.com/zentyal/zentyal/issues
Looking forward to receiving your feedback and comments!
Good work! When is it planed for upgrading from 7.1 to 8.0
47
Spanish / Zentyal 8 en LXC (Contenedor ProxMox)
« Last post by gose on March 03, 2024, 11:52:41 am »Hola buenos dias a todos!
Me dispongo a instalar Zentyal 8 en Proxmox, y se me ocurre que en lugar de instalarlo como VM, lo instalaré en LXC por aquello del rendimiento y aprovechamiento de recursos, tengo un Zentyal antiguo (3.5) que fue virtualizado de una máquina física y ahí está corriendo como un campeón, pero en LXC no he visto algo real y quiero probar a ver si funciona correctamente.
Por otro lado lo estoy intentando y siempre saca un error al final de la instalación, parto de una plantilla ubuntu 22.04 y alli intento instalarlo, pero todas las instalaciones que he probado resultan en un erro final cuando está al 99% de la instalación:
******************************************************************************************
dpkg: error processing package zentyal-core (--configure):
installed zentyal-core package post-installation script subprocess returned error exit status 2
dpkg: dependency problems prevent configuration of zentyal-software:
zentyal-software depends on zentyal-core (>= 8.0.0); however:
Package zentyal-core is not configured yet.
zentyal-software depends on zentyal-core (<< 8.1.0); however:
Package zentyal-core is not configured yet.
dpkg: error processing package zentyal-software (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of zentyal:
zentyal depends on zentyal-core; however:
Package zentyal-core is not configured yet.
zentyal depends on zentyal-software; however:
Package zentyal-software is not configured yet.
dpkg: error processing package zentyal (--configure):
dependency problems - leaving unconfigured
Processing triggers for dbus (1.12.20-2ubuntu4.1) ...
Processing triggers for install-info (6.8-4build1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.6) ...
Processing triggers for ufw (0.36.1-4ubuntu0.1) ...
Processing triggers for man-db (2.10.2-1) ...
Errors were encountered while processing:
zentyal-core
zentyal-software
zentyal
E: Sub-process /usr/bin/dpkg returned an error code (1)
******************************************************************************************
ya llevo 4 instalaciones cambiando varias opciones y siempre sale este error al final, y no sé si es instalable o es problema de la plantilla o qyue se yo.
Cualquier ayuda es bienvenida!
Gracias a todos, un saludo.
Me dispongo a instalar Zentyal 8 en Proxmox, y se me ocurre que en lugar de instalarlo como VM, lo instalaré en LXC por aquello del rendimiento y aprovechamiento de recursos, tengo un Zentyal antiguo (3.5) que fue virtualizado de una máquina física y ahí está corriendo como un campeón, pero en LXC no he visto algo real y quiero probar a ver si funciona correctamente.
Por otro lado lo estoy intentando y siempre saca un error al final de la instalación, parto de una plantilla ubuntu 22.04 y alli intento instalarlo, pero todas las instalaciones que he probado resultan en un erro final cuando está al 99% de la instalación:
******************************************************************************************
dpkg: error processing package zentyal-core (--configure):
installed zentyal-core package post-installation script subprocess returned error exit status 2
dpkg: dependency problems prevent configuration of zentyal-software:
zentyal-software depends on zentyal-core (>= 8.0.0); however:
Package zentyal-core is not configured yet.
zentyal-software depends on zentyal-core (<< 8.1.0); however:
Package zentyal-core is not configured yet.
dpkg: error processing package zentyal-software (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of zentyal:
zentyal depends on zentyal-core; however:
Package zentyal-core is not configured yet.
zentyal depends on zentyal-software; however:
Package zentyal-software is not configured yet.
dpkg: error processing package zentyal (--configure):
dependency problems - leaving unconfigured
Processing triggers for dbus (1.12.20-2ubuntu4.1) ...
Processing triggers for install-info (6.8-4build1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.6) ...
Processing triggers for ufw (0.36.1-4ubuntu0.1) ...
Processing triggers for man-db (2.10.2-1) ...
Errors were encountered while processing:
zentyal-core
zentyal-software
zentyal
E: Sub-process /usr/bin/dpkg returned an error code (1)
******************************************************************************************
ya llevo 4 instalaciones cambiando varias opciones y siempre sale este error al final, y no sé si es instalable o es problema de la plantilla o qyue se yo.
Cualquier ayuda es bienvenida!
Gracias a todos, un saludo.
48
Other modules / Re: Save and recovery error!
« Last post by pgyula on February 29, 2024, 09:07:48 am »Hi!
1) I installed a new 7.1 server, as the old one was destroyed,
2) the hostname and localdomain are the same as the names from the backup,
3) Modules installed and enabled,
I've been using zentyal since 2016, I've done several restores, I haven't experienced this kind of error so I asked for help.
Thank you Pgyula.
1) I installed a new 7.1 server, as the old one was destroyed,
2) the hostname and localdomain are the same as the names from the backup,
3) Modules installed and enabled,
I've been using zentyal since 2016, I've done several restores, I haven't experienced this kind of error so I asked for help.
Thank you Pgyula.
49
News and Announcements / Re: Zentyal 8.0 available!
« Last post by Andor on February 28, 2024, 07:30:31 pm »Seems like notifications via email have been enabled and I've received a notification about this 11 years after my last login in the forum. That should be checked!
Also, the SMF version on this forum hasn't been updated since then, for what I see...
Who's taking care of this information now that Gesforeda and Zentyal (the companies) don't exist anymore?
Also, the SMF version on this forum hasn't been updated since then, for what I see...
Who's taking care of this information now that Gesforeda and Zentyal (the companies) don't exist anymore?
50
Other modules / Re: Save and recovery error!
« Last post by turalyon on February 28, 2024, 05:45:46 pm »Hi,
To restore a configuration backup that contains the domain controller module within it, you must have the following:
1. The same hostname and domain are configured in System → General.
2. The DNS and Domain controller modules must be enabled (default values are OK).
Once both modules are up and running with the default information, you can import the configuration backup.
NOTE: If I were you, I would reinstall the server and then, repeat the mentioned process, just make sure the configuration backup is not deleted by accident.
—
This world is ours, and by the Holy Light, we will keep it safe, now and forever.
To restore a configuration backup that contains the domain controller module within it, you must have the following:
1. The same hostname and domain are configured in System → General.
2. The DNS and Domain controller modules must be enabled (default values are OK).
Once both modules are up and running with the default information, you can import the configuration backup.
NOTE: If I were you, I would reinstall the server and then, repeat the mentioned process, just make sure the configuration backup is not deleted by accident.
—
This world is ours, and by the Holy Light, we will keep it safe, now and forever.