Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Installation and Upgrades / Re: small firewall question
« on: April 07, 2013, 08:15:21 pm »
sam 
ty much. i use to have a variety of nat issues but i had my isp switch to a static ip to my house and it fix all the nat issues.
including double nat.
any other ideas?
i was thinking about maybe trying a 1-1 nat configuration? but i hear you have to do it tho hooks? and know nothing about using hooks.
do you think 1-1 would even make a difference?
sry im still on a learning curve here.
ty
ty much. i use to have a variety of nat issues but i had my isp switch to a static ip to my house and it fix all the nat issues.including double nat.
any other ideas?
i was thinking about maybe trying a 1-1 nat configuration? but i hear you have to do it tho hooks? and know nothing about using hooks.
do you think 1-1 would even make a difference?
sry im still on a learning curve here.
ty
2
Installation and Upgrades / Re: small firewall question
« on: April 07, 2013, 07:54:53 pm »
once again SORRY about starting a new topic. i didn't think it would be the same topic considering that topic(which you where vary helpful) was just to setup as a gateway. the zentyal is up and running as with proper ping. so i mark that topic as solved.my current issues are clearly stated.
1) when using my mic and headset: some players i can't hear them and they can't hear me at all./ other players we communicate perfectly. i never get a sometimes with any player, its always i can or i can't communicate with them and them to me.
2)lack of connecting to games with players
is there anything that i stated about ping? NO
christian
congrats on explaining it in a vary similar post that you can't help with this issue.stop badgering me about where i made my post i already said sorry and it wont happen again. if you can't help don't post.
1) when using my mic and headset: some players i can't hear them and they can't hear me at all./ other players we communicate perfectly. i never get a sometimes with any player, its always i can or i can't communicate with them and them to me.
2)lack of connecting to games with players
is there anything that i stated about ping? NO
christian
congrats on explaining it in a vary similar post that you can't help with this issue.stop badgering me about where i made my post i already said sorry and it wont happen again. if you can't help don't post. 3
Installation and Upgrades / Re: small firewall question
« on: April 07, 2013, 06:02:16 am »
sry, i haven't been on to update this post. no its not related to another post, or maybe its i just can't find it. sry.
so this is my setup.
nic1 nic2
static 192.168.0.1
xxx.xxx.xxx.199 dhcp range(192.168.0.2-192.168.0.200)
isp/modem----------zentyal----------------------------------- ap for home pc's/tablets/mobile/ect
---------------------------------- ps3
nic3
192.168.1.1
dhcp range(192.168.1.2-192.168.1.2)
when play online games with the ps3 there are 2 problems.
1) when using my mic and headset: some players i can't hear them and they can't hear me at all./ other players we communicate perfectly. i never get a sometimes with any player, its always i can or i can't communicate with them and them to me.
2)lack of connecting to games with players
when my ps3 is connected to the straight to modem i have no issues with anything. which is nat type 1.
my firewall is set as:
under filtering rules for internal network:
decision: source: destination: protocol:
accept-192.168.1.2-xxx.xxx.xxx.199-any(also tried setting any tcp along with any udp)(also tried setting source as 192.168.1.1 or both)
filtering rule from external network to internal network:
decision: source: destination: protocol:
accept-xxx.xxx.xxx.199-192.168.1.2-any((also tried setting any tcp along with any udp)(also tried setting destination as 192.168.1.1 or both)
i've tried setting fw settings to and from zentyal as well but no luck.
so im at a lost here
so this is my setup.
nic1 nic2
static 192.168.0.1
xxx.xxx.xxx.199 dhcp range(192.168.0.2-192.168.0.200)
isp/modem----------zentyal----------------------------------- ap for home pc's/tablets/mobile/ect
---------------------------------- ps3
nic3
192.168.1.1
dhcp range(192.168.1.2-192.168.1.2)
when play online games with the ps3 there are 2 problems.
1) when using my mic and headset: some players i can't hear them and they can't hear me at all./ other players we communicate perfectly. i never get a sometimes with any player, its always i can or i can't communicate with them and them to me.
2)lack of connecting to games with players
when my ps3 is connected to the straight to modem i have no issues with anything. which is nat type 1.
my firewall is set as:
under filtering rules for internal network:
decision: source: destination: protocol:
accept-192.168.1.2-xxx.xxx.xxx.199-any(also tried setting any tcp along with any udp)(also tried setting source as 192.168.1.1 or both)
filtering rule from external network to internal network:
decision: source: destination: protocol:
accept-xxx.xxx.xxx.199-192.168.1.2-any((also tried setting any tcp along with any udp)(also tried setting destination as 192.168.1.1 or both)
i've tried setting fw settings to and from zentyal as well but no luck.
so im at a lost here
4
Installation and Upgrades / small firewall question
« on: April 01, 2013, 01:38:58 am »
this maybe a silly question. sry
when setting a fw rule to an internal interface ip address will the rule apply to all the addresses that dhcp dishes out from that interface?
i only ask cause i think im still having a port issue even after setting any to any.
when setting a fw rule to an internal interface ip address will the rule apply to all the addresses that dhcp dishes out from that interface?
i only ask cause i think im still having a port issue even after setting any to any.
5
Installation and Upgrades / Re: noob needs help
« on: March 28, 2013, 05:40:23 am »
ok i got it. and its hooked up through the wan port on the ap.
ty vary much
ty vary much
6
Installation and Upgrades / Re: noob needs help
« on: March 28, 2013, 02:04:22 am »
are you saying i to set that nic like this?
interface static: 192.168.1.1
external(wan) X
dhcp range set 192.168.1.2-192.168.200
x=check mark
interface static: 192.168.1.1
external(wan) X
dhcp range set 192.168.1.2-192.168.200
x=check mark
7
Installation and Upgrades / Re: DD-WRT Router behind Zentyal.. Firewall Configurations...
« on: March 28, 2013, 01:21:10 am »
these guys are really good round here. im sure they will get you squared away.
i just had a quick question for you if you don't mind. which version is your net gear wndr3700? wndr3700v? I'm assuming its a v2. but if its a v4,I'd love to know how you got dd-wrt on it.
cheers
i just had a quick question for you if you don't mind. which version is your net gear wndr3700? wndr3700v? I'm assuming its a v2. but if its a v4,I'd love to know how you got dd-wrt on it.
cheers
8
Installation and Upgrades / Re: noob needs help
« on: March 28, 2013, 01:07:34 am »
pinging yahoo must have mislead me. simply because when the pc----- modem----internet ping to yahoo.com is less 200 ms, but pinging yahoo.com when zentyal-----modem---- is between 500-800 ms.
pinging everything else is normal for my area, except a couple sites they're similar yahoo's test.
im not mixing g and n devices
survey is good.
thank again for that tool.
here is a tool for you: name bench, its a dns benchmark tool
http://code.google.com/p/namebench/
you probably have something similar already
if you want to have a more organized desktop screen check out: fences by stardock,
http://download.cnet.com/Fences/3000-2072_4-10909535.html?tag=mncol;2
1 more thing:
i didn't realize it earlier. i had my ap wired to the wrong interface which is the 2nd nic on the internal.(configured for the ps3)
which is configured:
interface static 192.168.0.1
dhcp range set 192.168.0.2-192.168.02
which was fine when i did the test cause only 1 device was connected to the ap at 1 time.
one i moved the ap to the correct nic(nic1 on the internal) (configured for the ap)
which is configure:
interface static: 192.168.1.1
dhcp range set 192.168.1.2-192.168.1.200
only the first wired device to the ap will pick up and ip address automatically. i tryed a wireless device first too it wouldn't obtain an ip address automatically.
i can configure additional devices ip's manually and no problem, but it should be kicking out ip addresses automatically and it is not. i normal wouldn't care but it makes it hard to connect smartphones and tablets if you know what i mean
pinging everything else is normal for my area, except a couple sites they're similar yahoo's test.
im not mixing g and n devices
survey is good.
thank again for that tool.
here is a tool for you: name bench, its a dns benchmark tool
http://code.google.com/p/namebench/
you probably have something similar already
if you want to have a more organized desktop screen check out: fences by stardock,
http://download.cnet.com/Fences/3000-2072_4-10909535.html?tag=mncol;2
1 more thing:
i didn't realize it earlier. i had my ap wired to the wrong interface which is the 2nd nic on the internal.(configured for the ps3)
which is configured:
interface static 192.168.0.1
dhcp range set 192.168.0.2-192.168.02
which was fine when i did the test cause only 1 device was connected to the ap at 1 time.
one i moved the ap to the correct nic(nic1 on the internal) (configured for the ap)
which is configure:
interface static: 192.168.1.1
dhcp range set 192.168.1.2-192.168.1.200
only the first wired device to the ap will pick up and ip address automatically. i tryed a wireless device first too it wouldn't obtain an ip address automatically.
i can configure additional devices ip's manually and no problem, but it should be kicking out ip addresses automatically and it is not. i normal wouldn't care but it makes it hard to connect smartphones and tablets if you know what i mean
9
Installation and Upgrades / Re: noob needs help
« on: March 27, 2013, 11:24:54 pm »
well it looks good to me now. so i guess i have no issue?
10
Installation and Upgrades / Re: noob needs help
« on: March 27, 2013, 11:19:36 pm »
from wireless device(smartphone)----ap---zentyal(wirless)
--- Mar 27, 2013 3:14:53 PM
--- IP (eth0) 192.168.0.3
PING 8.8.8.8 (8.8.8.
56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=44 time=53.8 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=44 time=58.0 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=44 time=52.2 ms
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2011ms
min = 52.277 ms
avg = 54.718 ms
max = 58.044 ms
mdev = 2.436 ms
--- Mar 27, 2013 3:16:12 PM
--- IP (eth0) 192.168.0.3
PING e6500.g.akamaiedge.net (23.59.196.71) 56(84) bytes of data.
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_seq=1 ttl=56 time=22.8 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_seq=2 ttl=56 time=23.7 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_seq=3 ttl=56 time=33.3 ms
--- e6500.g.akamaiedge.net ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2111ms
min = 22.858 ms
avg = 26.662 ms
max = 33.355 ms
mdev = 4.747 ms
--- Mar 27, 2013 3:14:53 PM
--- IP (eth0) 192.168.0.3
PING 8.8.8.8 (8.8.8.
56(84) bytes of data.64 bytes from 8.8.8.8: icmp_seq=1 ttl=44 time=53.8 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=44 time=58.0 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=44 time=52.2 ms
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2011ms
min = 52.277 ms
avg = 54.718 ms
max = 58.044 ms
mdev = 2.436 ms
--- Mar 27, 2013 3:16:12 PM
--- IP (eth0) 192.168.0.3
PING e6500.g.akamaiedge.net (23.59.196.71) 56(84) bytes of data.
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_seq=1 ttl=56 time=22.8 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_seq=2 ttl=56 time=23.7 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_seq=3 ttl=56 time=33.3 ms
--- e6500.g.akamaiedge.net ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2111ms
min = 22.858 ms
avg = 26.662 ms
max = 33.355 ms
mdev = 4.747 ms
11
Installation and Upgrades / Re: noob needs help
« on: March 27, 2013, 11:06:52 pm »
from pc -----ap----zentyal(wired)nic1 internal
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\new user>ping 8.8.8.8
Pinging 8.8.8.8 with 32 bytes of data:
Reply from 8.8.8.8: bytes=32 time=43ms TTL=44
Reply from 8.8.8.8: bytes=32 time=43ms TTL=44
Reply from 8.8.8.8: bytes=32 time=42ms TTL=44
Reply from 8.8.8.8: bytes=32 time=44ms TTL=44
Ping statistics for 8.8.8.8:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 42ms, Maximum = 44ms, Average = 43ms
C:\Users\new user>ping www.rgj.com
Pinging e6500.g.akamaiedge.net [23.59.196.71] with 32 bytes of data:
Reply from 23.59.196.71: bytes=32 time=22ms TTL=56
Reply from 23.59.196.71: bytes=32 time=25ms TTL=56
Reply from 23.59.196.71: bytes=32 time=22ms TTL=56
Reply from 23.59.196.71: bytes=32 time=21ms TTL=56
Ping statistics for 23.59.196.71:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 21ms, Maximum = 25ms, Average = 22ms
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\new user>ping 8.8.8.8
Pinging 8.8.8.8 with 32 bytes of data:
Reply from 8.8.8.8: bytes=32 time=43ms TTL=44
Reply from 8.8.8.8: bytes=32 time=43ms TTL=44
Reply from 8.8.8.8: bytes=32 time=42ms TTL=44
Reply from 8.8.8.8: bytes=32 time=44ms TTL=44
Ping statistics for 8.8.8.8:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 42ms, Maximum = 44ms, Average = 43ms
C:\Users\new user>ping www.rgj.com
Pinging e6500.g.akamaiedge.net [23.59.196.71] with 32 bytes of data:
Reply from 23.59.196.71: bytes=32 time=22ms TTL=56
Reply from 23.59.196.71: bytes=32 time=25ms TTL=56
Reply from 23.59.196.71: bytes=32 time=22ms TTL=56
Reply from 23.59.196.71: bytes=32 time=21ms TTL=56
Ping statistics for 23.59.196.71:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 21ms, Maximum = 25ms, Average = 22ms
12
Installation and Upgrades / Re: noob needs help
« on: March 27, 2013, 10:55:59 pm »
from zentyal server.
scott@zentyal:~$ ping 8.8.8.8
PING 8.8.8.8 (8.8.8. 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_req=1 ttl=45 time=44.7 ms
64 bytes from 8.8.8.8: icmp_req=2 ttl=45 time=45.1 ms
64 bytes from 8.8.8.8: icmp_req=3 ttl=45 time=45.8 ms
64 bytes from 8.8.8.8: icmp_req=4 ttl=45 time=44.3 ms
64 bytes from 8.8.8.8: icmp_req=5 ttl=45 time=44.3 ms
64 bytes from 8.8.8.8: icmp_req=6 ttl=45 time=44.3 ms
64 bytes from 8.8.8.8: icmp_req=7 ttl=45 time=44.4 ms
64 bytes from 8.8.8.8: icmp_req=8 ttl=45 time=43.8 ms
^C
--- 8.8.8.8 ping statistics ---
8 packets transmitted, 8 received, 0% packet loss, time 7009ms
rtt min/avg/max/mdev = 43.855/44.660/45.878/0.618 ms
scott@zentyal:~$ ping www.rgj.com
PING e6500.g.akamaiedge.net (23.59.196.71) 56(84) bytes of data.
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_req=1 ttl=57 time=21.5 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_req=2 ttl=57 time=22.3 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_req=3 ttl=57 time=22.3 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_req=4 ttl=57 time=20.7 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_req=5 ttl=57 time=22.9 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_req=6 ttl=57 time=22.7 ms
^C
--- e6500.g.akamaiedge.net ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5422ms
rtt min/avg/max/mdev = 20.770/22.117/22.996/0.787 ms
test from pc inside the network wired ill have on next then the wireless
scott@zentyal:~$ ping 8.8.8.8
PING 8.8.8.8 (8.8.8.
56(84) bytes of data.64 bytes from 8.8.8.8: icmp_req=1 ttl=45 time=44.7 ms
64 bytes from 8.8.8.8: icmp_req=2 ttl=45 time=45.1 ms
64 bytes from 8.8.8.8: icmp_req=3 ttl=45 time=45.8 ms
64 bytes from 8.8.8.8: icmp_req=4 ttl=45 time=44.3 ms
64 bytes from 8.8.8.8: icmp_req=5 ttl=45 time=44.3 ms
64 bytes from 8.8.8.8: icmp_req=6 ttl=45 time=44.3 ms
64 bytes from 8.8.8.8: icmp_req=7 ttl=45 time=44.4 ms
64 bytes from 8.8.8.8: icmp_req=8 ttl=45 time=43.8 ms
^C
--- 8.8.8.8 ping statistics ---
8 packets transmitted, 8 received, 0% packet loss, time 7009ms
rtt min/avg/max/mdev = 43.855/44.660/45.878/0.618 ms
scott@zentyal:~$ ping www.rgj.com
PING e6500.g.akamaiedge.net (23.59.196.71) 56(84) bytes of data.
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_req=1 ttl=57 time=21.5 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_req=2 ttl=57 time=22.3 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_req=3 ttl=57 time=22.3 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_req=4 ttl=57 time=20.7 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_req=5 ttl=57 time=22.9 ms
64 bytes from a23-59-196-71.deploy.akamaitechnologies.com (23.59.196.71): icmp_req=6 ttl=57 time=22.7 ms
^C
--- e6500.g.akamaiedge.net ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5422ms
rtt min/avg/max/mdev = 20.770/22.117/22.996/0.787 ms
test from pc inside the network wired ill have on next then the wireless
13
Installation and Upgrades / Re: noob needs help
« on: March 27, 2013, 06:34:49 pm »
yes a higher then normal ping is the only issue im having. everything esle running great. you guys are awsome.
and sry every1. but between all the input and translation getting lost. im a little upside down. so just to make sure we are on the same page.
fresh start
what addresses should i be pinging?
and from what device would you like me to ping from?
and sry every1. but between all the input and translation getting lost. im a little upside down. so just to make sure we are on the same page.
fresh start
what addresses should i be pinging?
and from what device would you like me to ping from?
14
Installation and Upgrades / Re: noob needs help
« on: March 27, 2013, 01:54:36 am »
thats a really cool tool i used the mobile version.
but keep in mind i did the ping test wired to the ap
but keep in mind i did the ping test wired to the ap
15
Installation and Upgrades / Re: noob needs help
« on: March 27, 2013, 12:51:20 am »
once you set it up as an ap all the option grey out and are disable. except for qos