Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - rawa

Pages: 1 [2] 3 4 ... 7
16
Firewall, should I configure something to run the VPN

The firewall does not have anything set up, I set something to run the VPN, indicate that the VPN function for the port 1194 for example? where does this if so?

But while it's running and not configured, everything works, the only doubt for me is the issue of VPN if you need something on the firewall.

Thanks, I await your response.

Ruben Arno

Cortafuegos , debo configurar algo para que funcione la VPN

El cortafuego no tiene nada configurado, debo configurar algo para que funcione la VPN, se debe indicar que la VPN funcionara por el puerto 1194 por ejemplo ? donde se hace esto si es asi ?

Pero si bien esta ejecutandose y no configurado, funciona todo, solo me viene la duda por el tema de la VPN si requiere de algo en el cortafuego.

Gracias, espero su respuesta.

Ruben Arno

17
Certification Authority / Download Key (s) and Certifications

I downloaded the files with Ceriticados but put them on the client gives me error tells me that the sertificado is invalid, I have both server side and client VPN 3.3 Zentyal, but Zentyal I access the console from a browser on a PC Windows, is valid the file you downloaded from this option as much as Windows or Linux Zentyal in this case or should do something different for the file you downloaded is compatible.

Thank you and I await your response.


Ruben Arno

Autoridad de Certificacion / Descargar Clave(s) y Certificados

Yo descargo los archivos con los Ceriticados pero al ponerlos en el cliente me da error, me dice que el sertificado no es valido, yo tengo en ambos lados servidor y cliente VPN Zentyal 3.3 , pero accedo a la consola Zentyal desde un navegador en una PC con Windows, es valido el archivo que descargo de esta opcion tanto como para Windows o Linux Zentyal en este caso o debe hacer algo distinto para que sea compatible el archivo que bajo.

Gracias y espero su respuesta.


Ruben Arno

18
You need to enable the "HTTP Proxy" service for the VPN to work

Hello

When I'm putting together the VPN I see that I get a sign that says:

***********************
Do you want to save changes?
CLOSE
The following modules have unsaved changes but are disabled. If needed, you can enable the State of modules.
HTTP proxy

If you have made ​​changes to the network interfaces or port administration panel, you may need to rewrite the url manually to re-access the administration panel.
***********************

It is necessary that the HTTP Proxy service is enabled to run the VPN?

thanks

Ruben Arno

Se necesita habilitar el servicio "Proxy HTTP" para que la VPN funcione

Hola

Cuando estoy armando la VPN veo que me sale un cartel que dice:

***********************
¿Desea guardar los cambios?
CLOSE
Los siguientes módulos tienen cambios sin guardar pero están deshabilitados. Si se necesitan, se pueden habilitar en Estado de los Módulos.
Proxy HTTP

Si ha hecho cambios en los interfaces de red o en el puerto del panel de administración, es posible que necesite reescribir la url manualmente para volver a acceder al panel de administración.
***********************

Es necesario que el servicio Proxy HTTP este habilitado para que funcione la VPN ?

Gracias

Ruben Arno


19
I need a step by step to assemble a VPN (openVPN) between two Zentyal

Hello

I'm trying assembling and testing a VPN connecting two Zentyal and dizzy and I, while on one side and tells me that everything is OK, the client side can not bind.

So clean slate, I have to start over from scratch and hear recommendations.

A hug and thanks.

Ruben Arno

Necesito un paso a paso para el armado de una VPN ( openVPN) entre dos Zentyal

Hola

Estoy probando y probando el armado de una VPN que una dos Zentyal y ya me maree, si bien de un lado ya me dice que esta todo OK, del lado del cliente no puedo enlazarlo.

Asi que borron y cuenta nueva, tengo que volver a empezar de cero y escucho recomendaciones.

Un abrazo y gracias.

Ruben Arno

20
The file supplied as CA certificate is invalid

Wanting to connect a VPN Client asks me some data and upload a file called: CA Certificate (Option: VPN / VPN Client / Client setup), I put the certificate that the VPN server generates me and I get a sign error where I said: "The file supplied as CA certificate is invalid", where should I generate this file is missing or something.

A hug and read.

Ruben Arno

El fichero suministrado como certificado de CA no es válido

Al querer conectar una VPN Cliente me pide algunos datos y que suba un archivo que llama: Certificado de la CA ( Opcion: VPN/Cliente VPN/Configuración del cliente), yo le pongo el certificado que me genera el Servidor VPN y me sale un cartel de error donde me dice: "El fichero suministrado como certificado de CA no es válido"; donde debo generar este archivo o me esta faltando algo.

Un abrazo y nos leemos.

Ruben Arno

21
As the automatic restart Zentyal Server 3.3 or services thereof program

Hello

Someone had to do or know how you program the automatic restart of a Zentyal 3.3 server and / or some of its services available, such as restart 1 time per week and full Servirdor 1 time per day restart the DHCP service?

thanks

Ruben Arno

 Como se programa el reinicio automatico de Server Zentyal 3.3 o servicios del mismo

Hola

Alguno tuvo que hacer o sabe como se programa el reinicio automatico de un servidor Zentyal 3.3 y/o de algunos de sus servicios disponibles, por ejemplo reiniciar 1 vez por semana el Servirdor completo y reiniciar 1 vez por dia el servicio de DCHP ?

Gracias

Ruben Arno

22
as I check if an SMTP port is not blocked by Zentyal

Hello

As I see that ports are blocked by Zentyal Zentyal 3.3 started as a router and detects only the fresh, mails SMTP SSL port 465 or port 26 using do not work well, but if they do not think it's a problem of Zentyal, I would like to verify by doubts that these ports are not blocked by Zentyal.

thanks

Ruben Arno

como compruebo si un puerto SMTP no esta bloqueado por Zentyal

Hola

Como compruebo que puertos estan bloqueados por Zentyal, puse Zentyal 3.3 como ruteador y solo detecte que los envios de mails SMTP: puerto 465  SSL o usando puerto 26 no funcionan bien, pero si bien no creo que sea un problema de Zentyal, me gustaria verificar por las dudas que estos puertos no esten bloqueados por Zentyal.

Gracias

Ruben Arno

23



Hello

I have to connect a VPN client, and the dashboard tells me that the service is disabled, but does not clarify if this disabled because it could not connect or because I should connect the service from this point where I will connect the VPN client, if this last of which the service is enabled.

A hug and read.

Ruben Arno

Donde habilito servicio de VPN cliente en Zentyal 3.3

Hola

Tengo que conectar un cliente VPN , y en el dashboard me dice que el servicio esta deshabilitado, pero no aclara si esta deshabilitado porque no pudo conectarse o bien porque debo conectar el servicio desde este punto donde voy a conectar el cliente VPN, si es esto ultimo de donde se habilita el servicio.

Un abrazo y nos leemos.

Ruben Arno

Data in dashboard
***********************************
Cliente servidorvpnitc
Servicio   Deshabilitado
Estado del demonio   Detenido
Blanco de la conexión    /
Dirección de la interfaz de la VPN   No activo
************************************

24


Hello

Zentyal there any place where I can show how fast this internet providers working in real and not theoretical.

This data is not only good for monitoring but also to keep track of what gives me the supplier over time and compare it with what must the provider me.

thanks

Ruben Arno

Calcular velocidad de red a la que Zentyal entrega el servicio de banda ancha ?

Hola

Existe algun lugar donde Zentyal me pueda mostrar a que velocidad esta trabajando los proveedores de internet en forma real y no teorica.

Este dato no es solo bueno para monitorear sino tambien para llevar un control de lo que me entrega el proveedor en el transcurso del tiempo y compararlo con lo que debe el proveedor darme.

Gracias

Ruben Arno

25


Hello

The Zentyal 3.3 shows me on one side of the console, the option: Dashboard "" the PCs connected to the DHCP assigned (I see fixed IPs here), however for me to see this is sometimes very good and more eg to see even when I connect, connected time it takes, when I disconnect and volume handling both rise and fall packages, this information where you can see inside the console?

thanks

Ruben Arno

Mostrando IPs asignadas en Dashboard

Hola

El Zentyal 3.3 me muestra en uno de los lados del la consola, en la opcion: Dashboard"" las PCs conectadas que el DCHP asigno ( no veo las IPs fijas aca), sin embargo para mi ver esto a veces es muy bueno y mas aun por ejemplo poder ver cuando se conecto, tiempo que lleva conectado, cuando se desconecto y que volumen de paquetes manejo tanto de subida como bajada, esta informacion donde se puede ver dentro de la consola ?

Gracias

Ruben Arno

26
Installation and Upgrades / Where to enable WAN Failover
« on: February 25, 2014, 07:23:37 pm »


Hi

This option found in Zentyal 3.3 on the option "Network / Interfaces and flap there" Wan Failover "" indicates to me a sign that says: "The WAN failover is not enabled event must activate to use this feature.";. now of where the console is activated, I've searched but can not find, in theory with this option enabled I can set rules for rolling wide band true? and I could only investigate is to replace when the primary fails, or some experiment some more interesting option, please its important sobering experience to see if the sum of the bandwidth is possible giving higher speed network and in case one fails the other will still work.

Thank you.

Ruben Arno

Donde habilitar WAN Failover

Hi

Esta opcion que se encuentra en Zentyal 3.3 en la opcion: "Red/Interfaces y ahi solapa "Wan Failover"" , me indica un cartel que dice: "El evento WAN failover no está habilitado. Debe activarlo para usar esta característica."; ahora de que lugar de la consola se activa, lo he buscado pero no lo encuentro, en teoria con esta opcion activada yo puedo poner reglas para el balanceo de ancho de banda cierto ? y por lo que pude investigar solo es para reemplazar cuando el principal falla, o alguno experimento alguna opcion mas interesante, por favor su experiencia seria importante para saber si la suma de las banda ancha es posible dandole mayor velocidad a la red y en caso que una falle la otra seguira funcionando.

Gracias.

Ruben Arno

27
 
VPN is necessary to configure the modem so you can connect a VPN client to the VPN server on OpenVPN?

If I have configured a VPN service on a Zentyal 3.3 with OpenVPN have the VPN server on this computer, and I want to connect a VPN Client service from another PC outside the intranet with Zentyal 3.3, I need to configure the modem something to make it look the VPN from public network of internet?

thanks

Ruben Arno

VPN es necesario configurar los modems para que se pueda conectar un cliente VPN al servidor VPN en OpenVPN ?

Si tengo configurado un servicio VPN en un Zentyal 3.3 , con OpenVPN tengo el Servidor VPN en este equipo, y quiero conectar un servicio VPN Cliente desde otra PC fuera de la intranet con  Zentyal 3.3, necesito configurar en el modem algo para que se vea la VPN desde la red publica de internet ?

Gracias

Ruben Arno

28
Installation and Upgrades / Re: Module install Zentyal 3.3 voip not
« on: February 08, 2014, 10:16:40 pm »
Hello

Alas, I had thought to try the VOIP module, saw this as a great opportunity for small offices, should put a good old Zentyal for this then.

Hugs and thanks for the info.

Ruben Arno

29
Hello

A multipurpose server without tools , is quite unprofessional , I think the idea of ​​Zentyal is that simple, but at the same time Zentyal grow as your administrator users give power , that power lies precisely in that the product is reliable but complete , there are things that are very useful and Zentyal already realized , if you look in the " Network" you will find a "Tools" option that lists a group of network tools that are useful for screening or testing, is this something else , of course, should not I be as it is amazing but there are versions that do not include sERVERS tools needed to check some, because a SERVER not rest and must be applied support, maintenance and routine. In that same spirit or idea, I find super intuitive to have the best tools available in packages or can be added , can be included in Zentyal packages as infrastructure or gateway as the case in other packages and ignore or put it as a additional module that is not included in packages such as "Monitoring broadband " , I prefer to not be missing , and that is available , easy , intuitive, for when you need no waste of time.
I think Zentyal has a very good idea, it is intuitive, easy but at the same time never fails to deliver complex services as any server.
Grow, hear from users is not a bad thing , many companies pay to have a feedback and understand the user , that is the wonder of the IT community , either in the forums or other means of dialogue , while the experience is shared and shrinks the gap between what software should do and what makes a channel where you can listen to the needs and some are good, some regular and some not be good , but it will fly best products are obtained , but especially become more usable, since they arise channels listen to the needs of users rather than representing a group will serve or not users .
Finally, the contributions are very good and I thank you . I like Zentyal , recommend it , but I think that is a distribution that can compete given graph to a server, which gives the possibility that modules are installed as required , and this is a huge potential and we think of dozens of modules possible that not all will apply but great in this distribution , for example consider a module for managing streaming (radio or video) , IP telephony, gaming servers , PC remote farms to use as professional CAD , etc. . I even think Zentyal should integrate solutions commonly used , not recommended, but recognize that the market uses and have them available , not for example I can think of , have a module where you can incorporate Teamviewer (a commercial software for remote access found in many companies) , modules virtualization where you can manage and contain virtual machines ( either with one of the best known as vmware , virtual box , etc. . ) . one as an administrator can have a reliable server operating system which is , can be recommended and look good , and then to manage without many complications if it serves the users is something that should be seen as an additional and join the team of Zentyal know define it . We as users can propose , discuss, the look of the novice user must undoubtedly also be the administrator , who wants something difficult enough to be solved in the day to do things that might be easy simple or difficult it look easy , I think it's called " continuous improvement." and " usability" , if it is easy for a novice , so will for the expert and that is something less worrying .

A hug and thank you very much for your feedback .

Ruben Arno


Hola

Un servidor multiproposito sin herramientas, es algo bastante poco profesional; creo que la idea de Zentyal es que sea simple, pero al mismo tiempo Zentyal crecerá en la medida que sus usuarios administradores le den potencia, esa potencia radica justamente en que el producto sea confiable, pero completo, hay cosas que son muy útiles y Zentyal ya se dio cuenta, si observan en la opción "Red" se encuentra una opción "Herramientas" que enumera un grupo de herramientas de Red que son útiles para hacer chequeos o pruebas, es esto algo demás, por supuesto que no, debe estar ya que es increíble pero hay versiones de SERVIDORES que no incluyen las herramientas que se necesitan para chequear algunos, el porque un SERVIDOR no descansa y se le debe aplicar soporte, mantenimiento y rutina. En ese mismo espíritu o idea, me parece super intuitivo tener las mejores herramientas disponibles en los paquetes o que se puedan sumar, se puede incluir en paquetes Zentyal como infraestructura o gateway según sea el caso y obviar en otros paquetes, o bien ponerlo como un modulo adicional que no esta incluido en los paquetes como es el "Monitoreo de banda ancha"; yo prefiero que sobre y no que falte, y que este disponible, sea fácil, intuitivo, para cuando se necesite no haya perdida de tiempo.
Creo que Zentyal tiene una idea MUY BUENA, es intuitivo, fácil, pero al mismo tiempo no deja de dar servicios complejos como todo servidor.
Crecer, escuchar la opinión de usuarios no es algo malo, muchas empresas pagan por tener un feedback y entender al usuario, eso es los maravilloso de las comunidades IT, sea con los de foros u otros medios de dialogo; mientras que se comparte la experiencia y se achica la brecha entro lo que debe hacer un software y lo que hace, se obtienen un canal donde se puede escuchar las necesidades y algunas serán buenas, otras regulares y otras no serán buenas, pero así los productos se vuelen mejores, pero por sobre todo se vuelven mas usables, ya que surgen de canales de escuchar las necesidades de los usuarios y no de lo que supone un grupo le servirá o no a los usuarios.
En fin, son muy buenos los aportes y les agradezco. Me gusta Zentyal, lo recomiendo, pero creo es una distribución que puede competir que le da gráfica a un servidor, que le da la posibilidad de que se instalen módulos según la necesidad, y esto es un potencial enorme ya que pensemos en decenas de módulos posibles que no todos aplicaran pero que harán grande a esta distribución, por ejemplo pensemos en un modulo para administrar streaming (radio o vídeo), telefonía IP, servidores de juegos, granjas para PC remotas de uso profesional como CAD, etc. Incluso creo que Zentyal debería integrar soluciones de uso común, no como lo recomendado, sino reconocer que el mercado los usa y tenerlos disponibles, no se por ejemplo se me ocurre, tener un modulo donde pueda incorporar Teamviewer ( un software comercial de acceso remoto que se encuentra en muchas empresas), módulos de virtualizacion donde pueda administrar y contener maquinas virtuales (sea con uno de los mas conocidos como vmware, virtual box, etc.).Uno como administrador puede contar con un sistema operativo para servidores el cual sea confiable, que se pueda recomendar y quedar bien,   y luego poder administrarlo sin tantas complicaciones, si le sirve a los usuarios es algo que debe analizarse y sumarse como adicional, el equipo de Zentyal sabrá definir-lo. Nosotros como usuarios podemos proponer, dialogar, la mirada del usuario novato sin lugar a dudas debe ser para el administrador también, quien quiere algo difícil, bastante hay que resolver en el día a día, para no hacer las cosas que pueden ser fáciles sencillas, o las difíciles que parezcan fáciles, creo que se llama "mejora continua". y "usabilidad", si es fácil para un novato, también lo sera para el experto y es algo menos de que tener que preocuparse.

Un abrazo y muchas gracias por sus comentarios.

Ruben Arno


30
Hello

Suart Well, I'll try if I can install Zentyal.
But as you say if it is good should be included as a package more.
I think for managers the tools are always useful.
A hug and thanks for your contribution.

Ruben Arno

Pages: 1 [2] 3 4 ... 7