This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
46
Other modules / Virtual pc console from the management page not open
« on: January 03, 2019, 10:26:09 am »
866/5000
Hi!
My great pleasure with the zentyal 6 is the possibility of virtualization.
I think this was a very good decision.
But I had a problem with it because unfortunately something went wrong during the updates. After the current zentyal updates, the virtual pc console will not open:
- I get this error message on my website: Server disconnected (code: 1006)
- log in: 201/12/12 09:13:42 [error] 3825 # 3825: * 328 peer closed connection in SSL handshake (104: Connection reset by peer) client: 192.168.100.27 , server:, request: "GET / websockify? token = praxis-pc-32bit-en HTTP / 1.1", upstream: "https://127.0.0.1:6900/?token=praxis-pc-32bit-hu", host: "192.168.100.10:8443"
The vnc reaches 5900 port-free.
The console was also flawless before upgrading.
Has anyone ever encountered such a mistake?
Hi!
My great pleasure with the zentyal 6 is the possibility of virtualization.
I think this was a very good decision.
But I had a problem with it because unfortunately something went wrong during the updates. After the current zentyal updates, the virtual pc console will not open:
- I get this error message on my website: Server disconnected (code: 1006)
- log in: 201/12/12 09:13:42 [error] 3825 # 3825: * 328 peer closed connection in SSL handshake (104: Connection reset by peer) client: 192.168.100.27 , server:, request: "GET / websockify? token = praxis-pc-32bit-en HTTP / 1.1", upstream: "https://127.0.0.1:6900/?token=praxis-pc-32bit-hu", host: "192.168.100.10:8443"
The vnc reaches 5900 port-free.
The console was also flawless before upgrading.
Has anyone ever encountered such a mistake?
47
Email and Groupware / Re: Outlook with Zentyal 5
« on: January 03, 2019, 10:11:50 am »
And i try to configure with outlook 2013, 2016, 2019. But not work. :-(
48
Email and Groupware / Re: Outlook with Zentyal 5
« on: January 03, 2019, 10:10:52 am »
I use the latest version from the version 6. :-)
49
Magyar / Virtuális pc konzol weboldalról nem nyitható meg.
« on: December 19, 2018, 09:30:15 am »
Sziasztok!
Nagy örömömre a a zentyal 6 behozta a virtualizálás lehetőségét.
Ezt én úgy gondolom hogy egy nagyon jó döntés volt.
De már gondom is akadt vele mert a frissítések folyamán sajnos valami félresiklott. Az aktuális zentyal frissítések után a virtuális pc konzolja nem nyílik meg:
- a weboldalon ezt a hiba üzenetet kapom: Server disconnected (code: 1006)
- logban meg ez jelentkezik: 2018/12/19 09:13:42 [error] 3825#3825: *328 peer closed connection in SSL handshake (104: Connection reset by peer) while SSL handshaking to upstream, client: 192.168.100.27, server: , request: "GET /websockify?token=praxis-pc-32bit-hu HTTP/1.1", upstream: "https://127.0.0.1:6900/?token=praxis-pc-32bit-hu", host: "192.168.100.10:8443"
A vnc elérés 5900-ás portonhibátlanul megy.
A konzol frissítés elött szintén hibátlanúl ment.
Valaki találkozott már ilyen hibával?
Nagy örömömre a a zentyal 6 behozta a virtualizálás lehetőségét.
Ezt én úgy gondolom hogy egy nagyon jó döntés volt.
De már gondom is akadt vele mert a frissítések folyamán sajnos valami félresiklott. Az aktuális zentyal frissítések után a virtuális pc konzolja nem nyílik meg:
- a weboldalon ezt a hiba üzenetet kapom: Server disconnected (code: 1006)
- logban meg ez jelentkezik: 2018/12/19 09:13:42 [error] 3825#3825: *328 peer closed connection in SSL handshake (104: Connection reset by peer) while SSL handshaking to upstream, client: 192.168.100.27, server: , request: "GET /websockify?token=praxis-pc-32bit-hu HTTP/1.1", upstream: "https://127.0.0.1:6900/?token=praxis-pc-32bit-hu", host: "192.168.100.10:8443"
A vnc elérés 5900-ás portonhibátlanul megy.
A konzol frissítés elött szintén hibátlanúl ment.
Valaki találkozott már ilyen hibával?
50
Magyar / Re: Transzparens proxy
« on: December 19, 2018, 09:09:56 am »
Szia!
A https proxyzása annyira nem is egyszerű, Mert egy titkosított kommunikációt kell kibontani vizsgálni vissza csukni stb.
Eddig úgy tudtam hogy a https-t transparensben nem is lehet proxy-zni. De ha gondolod akkor googli és "transparent https proxy with squid" Erre keress rá.
A https proxyzása annyira nem is egyszerű, Mert egy titkosított kommunikációt kell kibontani vizsgálni vissza csukni stb.
Eddig úgy tudtam hogy a https-t transparensben nem is lehet proxy-zni. De ha gondolod akkor googli és "transparent https proxy with squid" Erre keress rá.
51
Installation and Upgrades / relocation error: /usr/lib/x86_64-linux-gnu/libapt-private.so.0.0:
« on: October 29, 2018, 09:33:29 am »
Hi!
Currently if you upgrade the libapt-pkg5.0 to the latest version, in this case you got the followin error message when you try to run some upgrade ( apt update, deselect update menu, etc ). The only solution what is work for me if i downgrade the libapt-pkg5.0.
Here is the link what is good for me.
http://archive.ubuntu.com/ubuntu/pool/main/a/apt/libapt-pkg5.0_1.2.29_amd64.deb
Have a nice day, and error free syslog! ;-)
Currently if you upgrade the libapt-pkg5.0 to the latest version, in this case you got the followin error message when you try to run some upgrade ( apt update, deselect update menu, etc ). The only solution what is work for me if i downgrade the libapt-pkg5.0.
Here is the link what is good for me.
http://archive.ubuntu.com/ubuntu/pool/main/a/apt/libapt-pkg5.0_1.2.29_amd64.deb
Have a nice day, and error free syslog! ;-)
52
Email and Groupware / zentyal 5.1.1 not working via activesync with office 2013 outlook
« on: October 08, 2018, 05:02:14 pm »
Hi!
I faced with the following issue:
- from mobile telephone exchg Active Sync is working
- from mobile telephone new exchg AS mailbox register is working
- from laptop with outlook what is configured earlier is working
- from laptop with outlook new exchg mailbox registering is not working
I try to run some debug when i try to open the autodiscover.xml i got error message from the apache.
And i read some sogo doc and the autodiscover is proxied to the 127.0.0.1:5000 but no service wat is using this port.
Somebody please help!!!! :-)
THX Kind Regards Gábor Strama
I faced with the following issue:
- from mobile telephone exchg Active Sync is working
- from mobile telephone new exchg AS mailbox register is working
- from laptop with outlook what is configured earlier is working
- from laptop with outlook new exchg mailbox registering is not working
I try to run some debug when i try to open the autodiscover.xml i got error message from the apache.
And i read some sogo doc and the autodiscover is proxied to the 127.0.0.1:5000 but no service wat is using this port.
Somebody please help!!!! :-)
THX Kind Regards Gábor Strama
53
Email and Groupware / Re: Outlook with Zentyal 5
« on: October 08, 2018, 04:31:26 pm »
Hello!
Is there any solution for this problem?
Because i got same problem.
Please help!
THX
Kind Regards Gábor Strama
Is there any solution for this problem?
Because i got same problem.
Please help!
THX
Kind Regards Gábor Strama
54
Email and Groupware / Undefinied dovecot mail store issue
« on: August 27, 2016, 01:26:28 pm »
Hello!
I have 3 zentyal server but one of them is die becouse that had a hardware issue and i install a new one...
I restore the old server settings from the cloud backup...
But some time i saw this error:
Aug 26 14:37:59 mail dovecot: doveconf: Panic: file settings-parser.c: line 1925 (settings_copy_deflist_unique): assertion failed: (dest_count == ccount)
Aug 26 14:37:59 mail dovecot: doveconf: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x5e271) [0x7f03c7a87271] -> /usr/lib/dovecot/libdovecot.so.0(+0x5e34e) [0x7f03c7a8734e] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f03c7a42a9e] -> /usr/lib/dovecot/libdovecot.so.0(+0x29bf2) [0x7f03c7a52bf2] -> /usr/lib/dovecot/libdovecot.so.0(+0x29932) [0x7f03c7a52932] -> /usr/lib/dovecot/libdovecot.so.0(settings_parser_apply_changes+0x7d) [0x7f03c7a536bd] -> /usr/bin/doveconf(config_filter_parsers_get+0x51e) [0x55c2c201c44e] -> /usr/bin/doveconf(config_parse_file+0x92c) [0x55c2c201e2bc] -> /usr/bin/doveconf(main+0x3aa) [0x55c2c2017f6a] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f03c7685f45] -> /usr/bin/doveconf(+0xc79d) [0x55c2c201879d]
Aug 26 14:37:59 mail kernel: [ 3382.541352] init: ebox.loggerd main process (3562) killed by TERM signal
Aug 26 14:37:59 mail dovecot: config: Error: managesieve-login: dump-capability process killed with signal 6
Sombody see this error?
Please sombody help me....
I try to solve the issue, and i try to find some clue using the google.... but nothing.... :-(
Please help....
I have 3 zentyal server but one of them is die becouse that had a hardware issue and i install a new one...
I restore the old server settings from the cloud backup...
But some time i saw this error:
Aug 26 14:37:59 mail dovecot: doveconf: Panic: file settings-parser.c: line 1925 (settings_copy_deflist_unique): assertion failed: (dest_count == ccount)
Aug 26 14:37:59 mail dovecot: doveconf: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x5e271) [0x7f03c7a87271] -> /usr/lib/dovecot/libdovecot.so.0(+0x5e34e) [0x7f03c7a8734e] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f03c7a42a9e] -> /usr/lib/dovecot/libdovecot.so.0(+0x29bf2) [0x7f03c7a52bf2] -> /usr/lib/dovecot/libdovecot.so.0(+0x29932) [0x7f03c7a52932] -> /usr/lib/dovecot/libdovecot.so.0(settings_parser_apply_changes+0x7d) [0x7f03c7a536bd] -> /usr/bin/doveconf(config_filter_parsers_get+0x51e) [0x55c2c201c44e] -> /usr/bin/doveconf(config_parse_file+0x92c) [0x55c2c201e2bc] -> /usr/bin/doveconf(main+0x3aa) [0x55c2c2017f6a] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f03c7685f45] -> /usr/bin/doveconf(+0xc79d) [0x55c2c201879d]
Aug 26 14:37:59 mail kernel: [ 3382.541352] init: ebox.loggerd main process (3562) killed by TERM signal
Aug 26 14:37:59 mail dovecot: config: Error: managesieve-login: dump-capability process killed with signal 6
Sombody see this error?
Please sombody help me....
I try to solve the issue, and i try to find some clue using the google.... but nothing.... :-(
Please help....
55
Installation and Upgrades / Re: HowTo: add ids/ips module to zentyal 4.1, 4.2
« on: April 15, 2016, 09:42:38 am »
Hello Julio!
Have you seen any chance to make a solution how can we use again pppoe in zentyal?
Sorry about the offtopic question, i want to send in personal message but the system don't left it....
Have you seen any chance to make a solution how can we use again pppoe in zentyal?
Sorry about the offtopic question, i want to send in personal message but the system don't left it....
56
Installation and Upgrades / Re: HowTo: add ids/ips module to zentyal 4.1, 4.2
« on: April 14, 2016, 03:18:21 pm »
Than's a lot!
It is work for me....
Great JOB!
Have a nice day!
It is work for me....
Great JOB!
Have a nice day!
57
Installation and Upgrades / Re: HowTo: add ids/ips module to zentyal 4.1
« on: April 12, 2016, 07:42:46 pm »
Hello!
I made some modification, but if i try to made some admin modification i will got this error:
Error trace
Can't locate object method "securityUpdatesAddOn" via package "EBox::RemoteServices" at /usr/share/perl5/EBox/IPS/Composite/General.pm line 50.
Stack:
[/usr/share/perl5/EBox/IPS/Composite/General.pm:50]
[<anonymous component>:147]
[<anonymous component>:34]
at /usr/share/perl5/EBox/CGI/Base.pm line 364
in EBox::CGI::Base::run at /usr/share/perl5/EBox/CGI/Base.pm line 364
361: my ($protocol, $port);
362: my $url;
363: my $host = $request->env->{HTTP_HOST};
364: if ($referer) {
365: my $parsedURL = new URI($referer);
366: $protocol = $parsedURL->scheme();
367: $port = $parsedURL->port();
Show function arguments
in (eval) at /usr/share/perl5/EBox/CGI/Run.pm line 92
89: $handler = new $classname(@extraParams);
90: }
91: }
92: $handler->run();
93: $redis->commit();
94: return $handler->response()->finalize();
95: } catch ($ex) {
in EBox::CGI::Run::run at /usr/share/perl5/EBox/CGI/Run.pm line 68
65: $redis->begin();
66:
67: my $url = $self->urlFromRequest($request);
68: try {
69: my $effectiveUrl = _urlAlias($url);
70: my @extraParams = (request => $request);
71: if ($htmlblocks) {
Show function arguments
in main::__ANON__ at /usr/share/zentyal/psgi/zentyal.psgi line 46
43: local $SIG{__WARN__} = sub { EBox::warn($_[0]) };
44:
45: my $req = Plack::Request->new($env);
46: return EBox::CGI::Run->run($req);
47: };
48:
49: my $builder = new Plack::Builder();
Show function arguments
in Plack::App::URLMap::call at /usr/share/perl5/Plack/App/URLMap.pm line 71
68: return $self->response_cb($app->($env), sub {
69: $env->{PATH_INFO} = $orig_path_info;
70: $env->{SCRIPT_NAME} = $orig_script_name;
71: });
72: }
73:
74: DEBUG && warn "All matching failed.\n";
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in EBox::Middleware::Auth::call at /usr/share/perl5/EBox/Middleware/Auth.pm line 366
363: $self->_logout($env);
364: } elsif ($self->_validateSession($env)) {
365: delete $env->{'psgix.session'}{AuthReason};
366: return $self->app->($env);
367: } else {
368: # Require authentication, redirect to the login form.
369: return $self->_redirectToLogin($env);
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in Plack::Middleware::Conditional::call at /usr/share/perl5/Plack/Middleware/Conditional.pm line 16
13: my($self, $env) = @_;
14:
15: my $app = $self->condition->($env) ? $self->middleware : $self->app;
16: return $app->($env);
17: }
18:
19: 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in EBox::WebAdmin::Middleware::SubAppAuth::call at /usr/share/perl5/EBox/WebAdmin/Middleware/SubAppAuth.pm line 57
54: }
55: }
56: }
57: return $self->app->($env);
58: }
59:
60: 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in Plack::Middleware::Session::call at /usr/share/perl5/Plack/Middleware/Session.pm line 52
49:
50: $env->{'psgix.session.options'} = { id => $id };
51:
52: my $res = $self->app->($env);
53: $self->response_cb($res, sub { $self->finalize($env, $_[0]) });
54: }
55:
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in Plack::Middleware::ReverseProxy::call at /usr/share/perl5/Plack/Middleware/ReverseProxy.pm line 68
65: }
66: }
67:
68: $self->app->($env);
69: }
70:
71: 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in (eval) at /usr/share/perl5/EBox/Middleware/UnhandledError.pm line 78
75: my $res;
76: my $caught = 0;
77: try {
78: $res = $self->app->($env);
79: } catch ($e) {
80: $caught = 1;
81: # This $res will only be used if $trace is undef
in EBox::Middleware::UnhandledError::call at /usr/share/perl5/EBox/Middleware/UnhandledError.pm line 77
74:
75: my $res;
76: my $caught = 0;
77: try {
78: $res = $self->app->($env);
79: } catch ($e) {
80: $caught = 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in (eval) at /usr/share/zentyal/psgi/zentyal.psgi line 0
1: # Copyright (C) 2010-2014 Zentyal S.L.
2: #
3: # This program is free software; you can redistribute it and/or modify
at /usr/share/zentyal/psgi/zentyal.psgi line 0
1: # Copyright (C) 2010-2014 Zentyal S.L.
2: #
3: # This program is free software; you can redistribute it and/or modify
I use this script:
sudo apt-get install zbuildtools build-essential fakeroot dpkg-dev -y
cd ~/Downloads
wget http://archive.zentyal.org/zentyal/pool/main/z/zentyal-ips/zentyal-ips_3.5.1.tar.gz
tar -xf zentyal-ips_3.5.1.tar.gz
mv zentyal-ips-3.5.1 zentyal-ips-4.2.2
sed -i '1 i\zentyal-ips (4.2.2) trusty; urgency=medium\n\n * New release\n\n -- xy <xy@xy.com> Mon, 29 Jun 2015 00:00:00 +0100\n' ./zentyal-ips-4.2.2/debian/changelog
sed -i '1 i\4.2.2\n + Adapted to 4.2.2' ./zentyal-ips-4.2.2/ChangeLog
sed -i 's#Depends: zentyal-core (>= 3.5), zentyal-core (<< 4.0~1), zentyal-firewall,#Depends: zentyal-core (>= 4.2.2), zentyal-firewall,#g' ./zentyal-ips-4.2.2/debian/control
wget 'https://docs.google.com/uc?export=download&id=0B4_d-7xL0AS_a0E4eXIwZnpmU00' -O ips-stubs.diff
patch -t -p1 -i ips-stubs.diff
cd ./zentyal-ips-4.2.2
dpkg-buildpackage -rfakeroot -b
cd ..
sudo dpkg -i zentyal-ips_4.2.2_all.deb
sudo apt-get install -f -y
sudo sed -i 's\next if ($pkg->{name} eq '"'"'zentyal-ids'"'"');\#next if ($pkg->{name} eq '"'"'zentyal-ids'"'"');\g' /usr/share/zentyal/templates/software/ebox.mas
sudo service zentyal webadmin restart
I hope this some row is help for you....
I made some modification, but if i try to made some admin modification i will got this error:
Error trace
Can't locate object method "securityUpdatesAddOn" via package "EBox::RemoteServices" at /usr/share/perl5/EBox/IPS/Composite/General.pm line 50.
Stack:
[/usr/share/perl5/EBox/IPS/Composite/General.pm:50]
[<anonymous component>:147]
[<anonymous component>:34]
at /usr/share/perl5/EBox/CGI/Base.pm line 364
in EBox::CGI::Base::run at /usr/share/perl5/EBox/CGI/Base.pm line 364
361: my ($protocol, $port);
362: my $url;
363: my $host = $request->env->{HTTP_HOST};
364: if ($referer) {
365: my $parsedURL = new URI($referer);
366: $protocol = $parsedURL->scheme();
367: $port = $parsedURL->port();
Show function arguments
in (eval) at /usr/share/perl5/EBox/CGI/Run.pm line 92
89: $handler = new $classname(@extraParams);
90: }
91: }
92: $handler->run();
93: $redis->commit();
94: return $handler->response()->finalize();
95: } catch ($ex) {
in EBox::CGI::Run::run at /usr/share/perl5/EBox/CGI/Run.pm line 68
65: $redis->begin();
66:
67: my $url = $self->urlFromRequest($request);
68: try {
69: my $effectiveUrl = _urlAlias($url);
70: my @extraParams = (request => $request);
71: if ($htmlblocks) {
Show function arguments
in main::__ANON__ at /usr/share/zentyal/psgi/zentyal.psgi line 46
43: local $SIG{__WARN__} = sub { EBox::warn($_[0]) };
44:
45: my $req = Plack::Request->new($env);
46: return EBox::CGI::Run->run($req);
47: };
48:
49: my $builder = new Plack::Builder();
Show function arguments
in Plack::App::URLMap::call at /usr/share/perl5/Plack/App/URLMap.pm line 71
68: return $self->response_cb($app->($env), sub {
69: $env->{PATH_INFO} = $orig_path_info;
70: $env->{SCRIPT_NAME} = $orig_script_name;
71: });
72: }
73:
74: DEBUG && warn "All matching failed.\n";
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in EBox::Middleware::Auth::call at /usr/share/perl5/EBox/Middleware/Auth.pm line 366
363: $self->_logout($env);
364: } elsif ($self->_validateSession($env)) {
365: delete $env->{'psgix.session'}{AuthReason};
366: return $self->app->($env);
367: } else {
368: # Require authentication, redirect to the login form.
369: return $self->_redirectToLogin($env);
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in Plack::Middleware::Conditional::call at /usr/share/perl5/Plack/Middleware/Conditional.pm line 16
13: my($self, $env) = @_;
14:
15: my $app = $self->condition->($env) ? $self->middleware : $self->app;
16: return $app->($env);
17: }
18:
19: 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in EBox::WebAdmin::Middleware::SubAppAuth::call at /usr/share/perl5/EBox/WebAdmin/Middleware/SubAppAuth.pm line 57
54: }
55: }
56: }
57: return $self->app->($env);
58: }
59:
60: 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in Plack::Middleware::Session::call at /usr/share/perl5/Plack/Middleware/Session.pm line 52
49:
50: $env->{'psgix.session.options'} = { id => $id };
51:
52: my $res = $self->app->($env);
53: $self->response_cb($res, sub { $self->finalize($env, $_[0]) });
54: }
55:
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in Plack::Middleware::ReverseProxy::call at /usr/share/perl5/Plack/Middleware/ReverseProxy.pm line 68
65: }
66: }
67:
68: $self->app->($env);
69: }
70:
71: 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in (eval) at /usr/share/perl5/EBox/Middleware/UnhandledError.pm line 78
75: my $res;
76: my $caught = 0;
77: try {
78: $res = $self->app->($env);
79: } catch ($e) {
80: $caught = 1;
81: # This $res will only be used if $trace is undef
in EBox::Middleware::UnhandledError::call at /usr/share/perl5/EBox/Middleware/UnhandledError.pm line 77
74:
75: my $res;
76: my $caught = 0;
77: try {
78: $res = $self->app->($env);
79: } catch ($e) {
80: $caught = 1;
Show function arguments
in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50
47: sub to_app {
48: my $self = shift;
49: $self->prepare_app;
50: return sub { $self->call(@_) };
51: }
52:
53:
Show function arguments
in (eval) at /usr/share/zentyal/psgi/zentyal.psgi line 0
1: # Copyright (C) 2010-2014 Zentyal S.L.
2: #
3: # This program is free software; you can redistribute it and/or modify
at /usr/share/zentyal/psgi/zentyal.psgi line 0
1: # Copyright (C) 2010-2014 Zentyal S.L.
2: #
3: # This program is free software; you can redistribute it and/or modify
I use this script:
sudo apt-get install zbuildtools build-essential fakeroot dpkg-dev -y
cd ~/Downloads
wget http://archive.zentyal.org/zentyal/pool/main/z/zentyal-ips/zentyal-ips_3.5.1.tar.gz
tar -xf zentyal-ips_3.5.1.tar.gz
mv zentyal-ips-3.5.1 zentyal-ips-4.2.2
sed -i '1 i\zentyal-ips (4.2.2) trusty; urgency=medium\n\n * New release\n\n -- xy <xy@xy.com> Mon, 29 Jun 2015 00:00:00 +0100\n' ./zentyal-ips-4.2.2/debian/changelog
sed -i '1 i\4.2.2\n + Adapted to 4.2.2' ./zentyal-ips-4.2.2/ChangeLog
sed -i 's#Depends: zentyal-core (>= 3.5), zentyal-core (<< 4.0~1), zentyal-firewall,#Depends: zentyal-core (>= 4.2.2), zentyal-firewall,#g' ./zentyal-ips-4.2.2/debian/control
wget 'https://docs.google.com/uc?export=download&id=0B4_d-7xL0AS_a0E4eXIwZnpmU00' -O ips-stubs.diff
patch -t -p1 -i ips-stubs.diff
cd ./zentyal-ips-4.2.2
dpkg-buildpackage -rfakeroot -b
cd ..
sudo dpkg -i zentyal-ips_4.2.2_all.deb
sudo apt-get install -f -y
sudo sed -i 's\next if ($pkg->{name} eq '"'"'zentyal-ids'"'"');\#next if ($pkg->{name} eq '"'"'zentyal-ids'"'"');\g' /usr/share/zentyal/templates/software/ebox.mas
sudo service zentyal webadmin restart
I hope this some row is help for you....
58
Installation and Upgrades / Re: HowTo: add ids/ips module to zentyal 4.1
« on: April 12, 2016, 06:06:12 pm »
Hello!
Great work!
But I have one question:
This install method is work with zentyal 4.2.2?
Great work!
But I have one question:
This install method is work with zentyal 4.2.2?