This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
16
Installation and Upgrades / WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn
« on: March 28, 2014, 01:20:54 am »Hi To All,
here's message when check fdisk -l
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
i just worried if its safe. this message. please help how to fix.
thanks
17
Installation and Upgrades / Re: said: 451 Please try again later (in reply to end of DATA command)
« on: February 06, 2014, 12:48:07 am »
May i know to config properly thanks.
18
Installation and Upgrades / said: 451 Please try again later (in reply to end of DATA command)
« on: February 05, 2014, 03:26:44 pm »
hi to all,
Please help me, how to fix this.
said: 451 Please try again later (in reply to end of DATA command)
Thanks.
Arnel
Please help me, how to fix this.
said: 451 Please try again later (in reply to end of DATA command)
Thanks.
Arnel
19
Installation and Upgrades / filesharing
« on: October 28, 2013, 04:51:45 pm »
Hi to all,
i have 3.2.3 zentyal, but we have little problem i can't share on per user, but on group user, its working.
may i know how to fix. thanks.
i have 3.2.3 zentyal, but we have little problem i can't share on per user, but on group user, its working.
may i know how to fix. thanks.
20
Installation and Upgrades / [SOLVED] Re: how to fix software raid 1 degraded
« on: September 30, 2013, 05:06:47 pm »
Thanks this link and BrettonWoods
already fix.
http://www.ducea.com/2009/03/08/mdadm-cheat-sheet/
[SOLVED]
here the status
root@ubuntu:~# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md1 : active raid1 sdb1[2] sda1[0]
8295360 blocks super 1.2 [2/2] [UU]
md0 : active raid1 sdb2[2] sda2[0]
1945082688 blocks super 1.2 [2/2] [UU]
===============================================================
root@ubuntu:~# mdadm --detail /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Sat Sep 28 22:09:26 2013
Raid Level : raid1
Array Size : 1945082688 (1854.98 GiB 1991.76 GB)
Used Dev Size : 1945082688 (1854.98 GiB 1991.76 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Update Time : Mon Sep 30 23:09:19 2013
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : ubuntu:0 (local to host ubuntu)
UUID : c433f0e4:75e865f1:b80174db:1a4cb234
Events : 1535
Number Major Minor RaidDevice State
0 8 2 0 active sync /dev/sda2
2 8 18 1 active sync /dev/sdb2
root@ubuntu:~#
already fix.
http://www.ducea.com/2009/03/08/mdadm-cheat-sheet/
[SOLVED]
here the status
root@ubuntu:~# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md1 : active raid1 sdb1[2] sda1[0]
8295360 blocks super 1.2 [2/2] [UU]
md0 : active raid1 sdb2[2] sda2[0]
1945082688 blocks super 1.2 [2/2] [UU]
===============================================================
root@ubuntu:~# mdadm --detail /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Sat Sep 28 22:09:26 2013
Raid Level : raid1
Array Size : 1945082688 (1854.98 GiB 1991.76 GB)
Used Dev Size : 1945082688 (1854.98 GiB 1991.76 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Update Time : Mon Sep 30 23:09:19 2013
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : ubuntu:0 (local to host ubuntu)
UUID : c433f0e4:75e865f1:b80174db:1a4cb234
Events : 1535
Number Major Minor RaidDevice State
0 8 2 0 active sync /dev/sda2
2 8 18 1 active sync /dev/sdb2
root@ubuntu:~#
21
Installation and Upgrades / [SOLVED] how to fix software raid 1 degraded
« on: September 29, 2013, 03:12:41 pm »
how to fix this.
md126 : active (auto-read-only) raid1 sdb1[1]
8295360 blocks super 1.2 [2/1] [_U]
md127 : active (auto-read-only) raid1 sdb2[2]
1945082688 blocks super 1.2 [2/1] [_U]
md0 : active raid1 sda2[0]
1945082688 blocks super 1.2 [2/1] [U_]
md1 : active (auto-read-only) raid1 sda1[0]
8295360 blocks super 1.2 [2/1] [U_]
=========================================
Version : 1.2
Creation Time : Sat Sep 28 22:09:32 2013
Raid Level : raid1
Array Size : 8295360 (7.91 GiB 8.49 GB)
Used Dev Size : 8295360 (7.91 GiB 8.49 GB)
Raid Devices : 2
Total Devices : 1
Persistence : Superblock is persistent
Update Time : Sun Sep 29 20:59:02 2013
State : clean, degraded
Active Devices : 1
Working Devices : 1
Failed Devices : 0
Spare Devices : 0
Name : ubuntu:1 (local to host ubuntu)
UUID : 4ec71e61:6f8026e4:6496d7e7:5a9bbbdc
Events : 54
Number Major Minor RaidDevice State
0 8 1 0 active sync /dev/sda1
1 0 0 1 removed
================================================
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000b1708
Device Boot Start End Blocks Id System
/dev/sda1 2048 16601087 8299520 fd Linux raid autodetect
/dev/sda2 16601088 3907028991 1945213952 fd Linux raid autodetect
Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0001969f
Device Boot Start End Blocks Id System
/dev/sdb1 2048 16601087 8299520 fd Linux raid autodetect
/dev/sdb2 16601088 3907028991 1945213952 fd Linux raid autodetect
Disk /dev/md1: 8494 MB, 8494448640 bytes
2 heads, 4 sectors/track, 2073840 cylinders, total 16590720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/md1 doesn't contain a valid partition table
Disk /dev/md0: 1991.8 GB, 1991764672512 bytes
2 heads, 4 sectors/track, 486270672 cylinders, total 3890165376 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/md0 doesn't contain a valid partition table
Disk /dev/md127: 1991.8 GB, 1991764672512 bytes
2 heads, 4 sectors/track, 486270672 cylinders, total 3890165376 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/md127 doesn't contain a valid partition table
Disk /dev/md126: 8494 MB, 8494448640 bytes
2 heads, 4 sectors/track, 2073840 cylinders, total 16590720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
PLEASE HELP HOW TO RE-BUILT OR RE-SYNC.
md126 : active (auto-read-only) raid1 sdb1[1]
8295360 blocks super 1.2 [2/1] [_U]
md127 : active (auto-read-only) raid1 sdb2[2]
1945082688 blocks super 1.2 [2/1] [_U]
md0 : active raid1 sda2[0]
1945082688 blocks super 1.2 [2/1] [U_]
md1 : active (auto-read-only) raid1 sda1[0]
8295360 blocks super 1.2 [2/1] [U_]
=========================================
Version : 1.2
Creation Time : Sat Sep 28 22:09:32 2013
Raid Level : raid1
Array Size : 8295360 (7.91 GiB 8.49 GB)
Used Dev Size : 8295360 (7.91 GiB 8.49 GB)
Raid Devices : 2
Total Devices : 1
Persistence : Superblock is persistent
Update Time : Sun Sep 29 20:59:02 2013
State : clean, degraded
Active Devices : 1
Working Devices : 1
Failed Devices : 0
Spare Devices : 0
Name : ubuntu:1 (local to host ubuntu)
UUID : 4ec71e61:6f8026e4:6496d7e7:5a9bbbdc
Events : 54
Number Major Minor RaidDevice State
0 8 1 0 active sync /dev/sda1
1 0 0 1 removed
================================================
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000b1708
Device Boot Start End Blocks Id System
/dev/sda1 2048 16601087 8299520 fd Linux raid autodetect
/dev/sda2 16601088 3907028991 1945213952 fd Linux raid autodetect
Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0001969f
Device Boot Start End Blocks Id System
/dev/sdb1 2048 16601087 8299520 fd Linux raid autodetect
/dev/sdb2 16601088 3907028991 1945213952 fd Linux raid autodetect
Disk /dev/md1: 8494 MB, 8494448640 bytes
2 heads, 4 sectors/track, 2073840 cylinders, total 16590720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/md1 doesn't contain a valid partition table
Disk /dev/md0: 1991.8 GB, 1991764672512 bytes
2 heads, 4 sectors/track, 486270672 cylinders, total 3890165376 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/md0 doesn't contain a valid partition table
Disk /dev/md127: 1991.8 GB, 1991764672512 bytes
2 heads, 4 sectors/track, 486270672 cylinders, total 3890165376 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/md127 doesn't contain a valid partition table
Disk /dev/md126: 8494 MB, 8494448640 bytes
2 heads, 4 sectors/track, 2073840 cylinders, total 16590720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
PLEASE HELP HOW TO RE-BUILT OR RE-SYNC.
22
Installation and Upgrades / [SOLVED] Re: yahoo account we can't send.
« on: September 26, 2013, 03:07:53 am »
Smarthost to send mail: smtpdsl4.pldtdsl.net
I TRY this without port 587
it works thanks.
This smtpdsl4.pldtdsl.net working on pldt line, if you other line or isp maybe you try. because i try on globe lines or isp, not working.
Thanks.
I TRY this without port 587
it works thanks.
This smtpdsl4.pldtdsl.net working on pldt line, if you other line or isp maybe you try. because i try on globe lines or isp, not working.
Thanks.
23
Installation and Upgrades / [solved] yahoo account we can't send.
« on: September 26, 2013, 02:21:39 am »
hi to all,
I have still problem for yahoo account, when i call on my isp here's the gave me configuration.
Outgoing mail server SMTP: smtpdsl4.pldtdsl.net
UNCHECK - My outgoing server (SMTP) requires authentication
USE Port: 587
how can i use on my zentyal server ver. 2.2
i try to input on Smarthost to send mail:
Optional
The format is host[:port] being port set to 25 if none is supplied
I do not know if working. because all my emails on queqing.
Thanks.
I have still problem for yahoo account, when i call on my isp here's the gave me configuration.
Outgoing mail server SMTP: smtpdsl4.pldtdsl.net
UNCHECK - My outgoing server (SMTP) requires authentication
USE Port: 587
how can i use on my zentyal server ver. 2.2
i try to input on Smarthost to send mail:
Optional
The format is host[:port] being port set to 25 if none is supplied
I do not know if working. because all my emails on queqing.
Thanks.
24
Installation and Upgrades / Re: backup disable
« on: September 23, 2013, 04:01:38 pm »
i saw my crontab but no command.
thanks.
thanks.
25
Installation and Upgrades / backup disable
« on: September 23, 2013, 02:10:13 pm »
how to disabled backup.
i already remove/delete on module and software components. but still working backup module.
Thanks.
i already remove/delete on module and software components. but still working backup module.
Thanks.
26
Installation and Upgrades / [SOLVED] Re: webmail in zentyal 3.2
« on: September 22, 2013, 09:28:34 am »
Thanks this post, already fix.
There is a file:
/etc/mysql/conf.d/zentyal.cnf
In this file there is a line:
innodb = off
This has to be set to on - for roundcube!
innodb = on
There is a file:
/etc/mysql/conf.d/zentyal.cnf
In this file there is a line:
innodb = off
This has to be set to on - for roundcube!
innodb = on
27
Installation and Upgrades / webmail in zentyal 3.2
« on: September 22, 2013, 07:26:28 am »
hi to all,
may i know on zentyal 3.2 its existing (round cube mail and webmail services)
when i access my webmail links here's the error
DATABASE ERROR: CONNECTION FAILED!
Unable to connect to the database!
Please contact your server-administrator.
thanks.
may i know on zentyal 3.2 its existing (round cube mail and webmail services)
when i access my webmail links here's the error
DATABASE ERROR: CONNECTION FAILED!
Unable to connect to the database!
Please contact your server-administrator.
thanks.
28
Installation and Upgrades / Re: ubuntu server 13 zentyal 3.1 beta version
« on: September 18, 2013, 05:27:06 pm »
hi robb,
i use raid device. i can't config via mdadm.
please check all this image, thanks
http://patch.cis.net.ph/zentyal
my error on boot load, i can't install
thanks.
i use raid device. i can't config via mdadm.
please check all this image, thanks
http://patch.cis.net.ph/zentyal
my error on boot load, i can't install
thanks.
29
Installation and Upgrades / Re: ubuntu server 13 zentyal 3.1 beta version
« on: September 18, 2013, 04:23:06 pm »
here the version
Ubuntu Server 13.04 64-bit version
i have a lot of testing for 3.1 zentyal but unfortunately it not working, the issue of raid. i can't install properly this specification.
INTEL COREI5
MOTHERBOARD INTEL DH77KC (SUPPORTED RAID 0,1,5 AND 10)
8GB MEMORY DDR3
2X TERABYTE HARDDISK WESTERN DIGITAL BLACK SERIES
Ubuntu Server 13.04 64-bit version
i have a lot of testing for 3.1 zentyal but unfortunately it not working, the issue of raid. i can't install properly this specification.
INTEL COREI5
MOTHERBOARD INTEL DH77KC (SUPPORTED RAID 0,1,5 AND 10)
8GB MEMORY DDR3
2X TERABYTE HARDDISK WESTERN DIGITAL BLACK SERIES
30
Installation and Upgrades / ubuntu server 13 zentyal 3.1 beta version
« on: September 18, 2013, 04:06:38 pm »
hi to all,
May i know if compatible for ubuntu server 13 (zentyal 3.2)
thanks.
Arnel
May i know if compatible for ubuntu server 13 (zentyal 3.2)
thanks.
Arnel