This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Best way to accomplish (multiple offices)
« on: November 26, 2014, 12:16:46 pm »
Hy there,
I have one job in hand, replace 3 windows AD, for one new AD, but to serve 5 remote offices.
I think about zentyal, and i already test in virtual lab have too zentyal servers (one PDC and another as ADC) and i think its is go
What bring me here, is some doubts/ask for implementation sugestions.
Location A
1xZentyal - PDC
1xZentyal - ADC (backup PDC)
Location B
1xZentyal - ADC (for local login)
Location C
1xZentyal - ADC for local login)
Location D
1xZentyal - ADC for local login)
Location E
1xZentyal - ADC for local login)
For fileserver i have no ideia how to do it... should i have 1 server in any location, what OS do you recomend so i can replicate everything across servers like AD do?
I have one job in hand, replace 3 windows AD, for one new AD, but to serve 5 remote offices.
I think about zentyal, and i already test in virtual lab have too zentyal servers (one PDC and another as ADC) and i think its is go
What bring me here, is some doubts/ask for implementation sugestions.
Location A
1xZentyal - PDC
1xZentyal - ADC (backup PDC)
Location B
1xZentyal - ADC (for local login)
Location C
1xZentyal - ADC for local login)
Location D
1xZentyal - ADC for local login)
Location E
1xZentyal - ADC for local login)
For fileserver i have no ideia how to do it... should i have 1 server in any location, what OS do you recomend so i can replicate everything across servers like AD do?
2
Installation and Upgrades / [HELP] limit internet usage
« on: October 09, 2012, 02:12:06 pm »
Hy there,
Any way i can set a quota limit to internet browsing/download?
I have lightsquid installed and i can know how many MB a computer have download and upload, can i set a limit so zentyal after that block all browsing?
Thanks
Any way i can set a quota limit to internet browsing/download?
I have lightsquid installed and i can know how many MB a computer have download and upload, can i set a limit so zentyal after that block all browsing?
Thanks
3
Installation and Upgrades / zentyal 3.0 firewall
« on: September 21, 2012, 03:55:03 pm »
Hy there!
I made a rule to port forwarding to rdp:
eth2-red Zentyal TCP 4003 Any 192.168.1.6 3389 Replace source address not checked log checked
In firewall log i see this:
2012-09-21 14:51:39
eth2
eth0
89.155.143.249
192.168.1.6
TCP
51355
3389
REDIRECT
And the external connection every a few minutes keep fall. (this problem affect a windows server 2008)
Why the source port isn't 4003? why redirect and no allow?
Any clues?
I made a rule to port forwarding to rdp:
eth2-red Zentyal TCP 4003 Any 192.168.1.6 3389 Replace source address not checked log checked
In firewall log i see this:
2012-09-21 14:51:39
eth2
eth0
89.155.143.249
192.168.1.6
TCP
51355
3389
REDIRECT
And the external connection every a few minutes keep fall. (this problem affect a windows server 2008)
Why the source port isn't 4003? why redirect and no allow?
Any clues?
4
Installation and Upgrades / [SOLVED] Remove 127.0.0.1 from resolv.conf ??
« on: September 19, 2012, 04:33:13 pm »
Hy there,
Please can anyone tell me how to remove the localhost line from resolv.conf?
Zentyal is my gateway, i have a server with 2003 that is the dhcp and the domain.
If i comment/remove 127.0.0.1 and first entry is domain ip in resolv.conf zentyal can ping/dig/nslookup any computer name inside my lan, if 127.0.0.1 is the first entry i only can ping to ip address inside my lan.
Any clue?
Thanks
[Thread resume]
Configure zentyal as gateway firewall dhcpclient, dns server, transparent proxy IN a domain
dhcp server:
search domain -> your domain name
primary server: local zentyal dns
secondary nameserver: empty
enable dynamic dns
dynamic domain (same as before)
static same as dynamic
dns server:
Enable transparent dns cache (important)
your domain mus be dynamic domain
in tab hostnames add computers that you have configured as static ip and don't will be dhcp clients
http proxy:
transparent check
Please can anyone tell me how to remove the localhost line from resolv.conf?
Zentyal is my gateway, i have a server with 2003 that is the dhcp and the domain.
If i comment/remove 127.0.0.1 and first entry is domain ip in resolv.conf zentyal can ping/dig/nslookup any computer name inside my lan, if 127.0.0.1 is the first entry i only can ping to ip address inside my lan.
Any clue?
Thanks
[Thread resume]
Configure zentyal as gateway firewall dhcpclient, dns server, transparent proxy IN a domain
dhcp server:
search domain -> your domain name
primary server: local zentyal dns
secondary nameserver: empty
enable dynamic dns
dynamic domain (same as before)
static same as dynamic
dns server:
Enable transparent dns cache (important)
your domain mus be dynamic domain
in tab hostnames add computers that you have configured as static ip and don't will be dhcp clients
http proxy:
transparent check
5
Installation and Upgrades / [Solved] reinstall zentyal-users
« on: September 19, 2012, 03:10:16 pm »
I'm problems when i need to reinstall the users module because slapd keep give me error because ldap configuration and password etc.
If you have the same issue, purge the slapd package and then remove/backup the /var/lib/ldap/* files.
If you have the same issue, purge the slapd package and then remove/backup the /var/lib/ldap/* files.
Pages: [1]