This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Other modules / Re: Enabling IDS/IPS stops internet on interface
« on: November 14, 2023, 04:21:47 pm »
Hi,
Somebody can help in this case?
I tried to install on a clean install, same result.
I not installed anything only suricata and same result.
BR,
GáborS
Somebody can help in this case?
I tried to install on a clean install, same result.
I not installed anything only suricata and same result.
BR,
GáborS
2
Other modules / Re: Enabling IDS/IPS stops internet on interface
« on: October 24, 2023, 09:25:51 pm »
Hi Guys,
Somebody can help in this case, because i wish to use the IPS.
Please help!
BR,
GáborS
Somebody can help in this case, because i wish to use the IPS.
Please help!
BR,
GáborS
3
Directory and Authentication / Re: URGENT: The mount point must be mounted with 'acl' option
« on: September 09, 2023, 07:11:10 pm »
Hi,
I faced with this issue
This is the fstab:
/dev/mapper/LVM-LVM_storage /storage ext3 users,exec,acl,errors=remount-ro 0 2
I got the same error message when I try to make a share on this disk, but it is working smoothly if I try to share via Samba.
Please can somebody help in this case?
BR,
GáborS
I faced with this issue
This is the fstab:
/dev/mapper/LVM-LVM_storage /storage ext3 users,exec,acl,errors=remount-ro 0 2
I got the same error message when I try to make a share on this disk, but it is working smoothly if I try to share via Samba.
Please can somebody help in this case?
BR,
GáborS
4
Directory and Authentication / Re: zentyal webadmin not working after root password changed
« on: September 03, 2023, 12:20:58 pm »
Hi,
I found the solution,
passwd -d root
After the command necesarry to reboot the whole server.
Have nice day!
BR,
GáborS
I found the solution,
passwd -d root
After the command necesarry to reboot the whole server.
Have nice day!
BR,
GáborS
5
Directory and Authentication / Re: zentyal webadmin not working after root password changed
« on: September 03, 2023, 11:04:56 am »
Update,
All of zs command not working ( example zs firewall restart ), the command started witout any error message, but i not get any feedback from the service management.
Thank you for your help!
BR,
GáborS
All of zs command not working ( example zs firewall restart ), the command started witout any error message, but i not get any feedback from the service management.
Thank you for your help!
BR,
GáborS
6
Directory and Authentication / zentyal webadmin not working after root password changed
« on: September 03, 2023, 11:01:46 am »
Hi,
I need some help, i changed the root password on my zentyal server, after the change the zentyal webadmin always timed out and not working after sucessfull login.
I checked all of logs but i did't se any clue what is the problem.
When i try to stop or restart the webadmin zentyal service not happened anything....
Please help!
BR,
GáborS
I need some help, i changed the root password on my zentyal server, after the change the zentyal webadmin always timed out and not working after sucessfull login.
I checked all of logs but i did't se any clue what is the problem.
When i try to stop or restart the webadmin zentyal service not happened anything....
Please help!
BR,
GáborS
7
Directory and Authentication / Re: ldbsearch -H /var/lib/samba/private/sam.ldb -s base 'dn' --debug-stderr
« on: March 10, 2023, 01:15:25 pm »
Dear All!
Thank you for your quick help!
You save my days!
The solution is worked for me!
THX again!
BR,
GáborS
Thank you for your quick help!
You save my days!
The solution is worked for me!
THX again!
BR,
GáborS
8
Directory and Authentication / Re: ldbsearch -H /var/lib/samba/private/sam.ldb -s base 'dn' --debug-stderr
« on: March 09, 2023, 09:25:08 pm »
This is the output with the --debug-stdout:
lpcfg_do_global_parameter: WARNING: The "lanman auth" option is deprecated
GENSEC backend 'gssapi_spnego' registered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'spnego' registered
GENSEC backend 'schannel' registered
GENSEC backend 'naclrpc_as_system' registered
GENSEC backend 'sasl-EXTERNAL' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'ntlmssp_resume_ccache' registered
GENSEC backend 'http_basic' registered
GENSEC backend 'http_ntlm' registered
GENSEC backend 'http_negotiate' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
# record 1
PLS I need a help
BR,
GáborS
lpcfg_do_global_parameter: WARNING: The "lanman auth" option is deprecated
GENSEC backend 'gssapi_spnego' registered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'spnego' registered
GENSEC backend 'schannel' registered
GENSEC backend 'naclrpc_as_system' registered
GENSEC backend 'sasl-EXTERNAL' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'ntlmssp_resume_ccache' registered
GENSEC backend 'http_basic' registered
GENSEC backend 'http_ntlm' registered
GENSEC backend 'http_negotiate' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
# record 1
PLS I need a help
BR,
GáborS
9
Directory and Authentication / ldbsearch -H /var/lib/samba/private/sam.ldb -s base 'dn' --debug-stderr
« on: March 09, 2023, 09:22:40 pm »
Hi!
Somebody can help?
It is looks like the ldbsearch has been changed and a newer version is not working properly:
This command has been failed:
ldbsearch -H /var/lib/samba/private/sam.ldb -s base 'dn' --debug-stderr
If I modified the --debug-stderr to --debug-stdout in that case the command is running smoothly.
PLS Some body help because the server what I used is not started.
BR,
GáborS
Somebody can help?
It is looks like the ldbsearch has been changed and a newer version is not working properly:
This command has been failed:
ldbsearch -H /var/lib/samba/private/sam.ldb -s base 'dn' --debug-stderr
If I modified the --debug-stderr to --debug-stdout in that case the command is running smoothly.
PLS Some body help because the server what I used is not started.
BR,
GáborS
10
Installation and Upgrades / Re: Dovecot Permission Denied stats-writer
« on: January 17, 2023, 08:11:14 pm »
Hi,
This solution has worked for me, THX guys!
BR,
GáborS
This solution has worked for me, THX guys!
BR,
GáborS
11
Installation and Upgrades / Re: upgrade 6.2 to 7.0 - CA problem
« on: March 08, 2022, 09:43:16 pm »
Hi,
This solution is worked for me...
BR,
GáborS
This solution is worked for me...
This workedCode: [Select]sudo chown ebox:ebox /var/lib/zentyal/.rnd
BR,
GáborS
12
Email and Groupware / Re: Sogo xml parse error
« on: March 04, 2022, 09:18:55 am »
Hi,
It looks like this solution is working fro me:
https://forum.iredmail.org/post82363.html#p82363
Please check it and use it-
BR,
GáborS
It looks like this solution is working fro me:
https://forum.iredmail.org/post82363.html#p82363
Please check it and use it-
BR,
GáborS
13
Email and Groupware / Re: Sogo xml parse error
« on: March 03, 2022, 04:38:53 pm »
Dear All,
Sorry, after a few running hours the issue is coming back....
So in my system, the issue still exists....
BR,
GaborS
Sorry, after a few running hours the issue is coming back....
So in my system, the issue still exists....
BR,
GaborS
14
Installation and Upgrades / Re: Setup and configuration Opendkim
« on: March 02, 2022, 09:06:01 am »
Hi,
I found the solution, download the proper RSAT for windows and use the DNS config tool to create the proper DNS record.
BR,
GáborS
I found the solution, download the proper RSAT for windows and use the DNS config tool to create the proper DNS record.
BR,
GáborS
15
Email and Groupware / Re: Sogo xml parse error
« on: March 02, 2022, 09:01:14 am »
Hi,
I let to fix the broken packages to the dsklect and now everything is working on my side.
THX for the help!
BR,
Gábort
I let to fix the broken packages to the dsklect and now everything is working on my side.
THX for the help!
BR,
Gábort