Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Gabriel GHEORGHIU

Pages: [1] 2
1
Hi Daniel,

OK! I will not upgrade Ubuntu.
Thank you again!

If I don't mind, regarding the ports that must be opened if Zentyal is placed in the DMZ, can you give me some advice?

TIA,
Gabriel

2
Hi Daniel,

Thanks for the reply!
I use Zentyal as the Authoritative DNS Server for my domain.
The server is placed in the DMZ, with a private IP address.
In UTM I have two policies created:
Inbound: Port forwarding WAN IP to DMZ IP TCP+UDP/53
Outgoing: TCP+UDP/53, TCP+UDP/123, ICMP8, ICMP30, TCP43, 80,443.
Do we still need an open port for everything to work properly?

The update worked without problems after I opened all ports in UTM for both Inbound and Outcoming.

Is it necessary to upgrade the Ubuntu version (from version 20.04.6 LTS to 22.04.3 LTS)?

Code: [Select]
Using username "ns1admin".
ns1admin@10.0.10.10's password:
Welcome to Ubuntu 20.04.6 LTS (GNU/Linux 5.4.0-162-generic x86_64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage



You can access the Zentyal Web Interface at:

 * https://your_server_ip:8443



Expanded Security Maintenance for Applications is not enabled.

0 updates can be applied immediately.

5 additional security updates can be applied with ESM Apps.
Learn more about enabling ESM Apps service at https://ubuntu.com/esm

New release '22.04.3 LTS' available.
Run 'do-release-upgrade' to upgrade to it.

Last login: Thu Sep 14 13:00:43 2023 from 192.168.168.151
ns1admin@ns1:~$



Thanks in advance for your help!
Best regards,
Gabriel

3
Please help me to solve the following error that occurred during the update process:

Code: [Select]
ns1admin@ns1:~$ sudo bash -x /usr/share/zentyal/release-upgrade
...........................
+ echo -e '\033[0;32m Preparing the Zentyal upgrade from 7.0 to 7.1...\033[0m'
 Preparing the Zentyal upgrade from 7.0 to 7.1...
+ echo

+ getIDSRepositoryKey
+ echo -e '\033[0;32m - Getting the repository key for IDS module...\033[0m'
 - Getting the repository key for IDS module...
+ gpg --keyserver keyserver.ubuntu.com --recv-keys D7F87B2966EB736F
gpg: keyserver receive failed: Connection timed out
+ gpg --export D7F87B2966EB736F
gpg: WARNING: nothing exported
+ gpg --batch --yes --delete-keys D7F87B2966EB736F
gpg: key "D7F87B2966EB736F" not found: Not found
gpg: D7F87B2966EB736F: delete key failed: Not found
+ '[' -f /etc/apt/trusted.gpg.d/suricata.gpg ']'
++ stat -c %s /etc/apt/trusted.gpg.d/suricata.gpg
+ '[' 0 -lt 340 ']'
+ echo -e '\033[0;31m - The IDS key could not download correctly...\033[0m'
 - The IDS key could not download correctly...
+ echo

+ exit 130
ns1admin@ns1:

4
Hi Daniel,

Hi guys,

There is an open issue in Github related to this DNS resolution issue, you can check it out here:

* https://github.com/zentyal/zentyal/issues/2026

The following commands do not work for me (even after rebooting the system):
Code: [Select]
sudo rm -v /var/cache/bind/managed-keys.bind*
sudo zs dns restart

---------------------------------------------------------------------------------------

If you set that configuration parameter in the stub located at '/usr/share/zentyal/stubs/dns' and you lost it after restarting the DNS module, it is because you have another stub located at '/etc/zentyal/stubs/dns', and this directory has more priority than the other.

/stubs/dns  - these directories do not exist in my installation:

Code: [Select]
# cd /etc/zentyal/
# dir
core.conf  firewall.conf  logs.conf     post-save  pre-save
dns.conf   hooks          network.conf  ppa.gpg    zentyal.conf
#

----------------------------------------------------------------------

Quote
Moreover, in Dashboard, at Core version, is written 7.0.3 (available).

(available) disappeared. By the system itself, i think. ;D

---------------------------------------------------------------------

For now, I will stay with your solution.

Kind regards,
Gabriel

5
Hi Daniel,

Solved but not quite solved.
After I made some updates that appeared after I modified the file as you said, after restarted the system, the file was re-written without the modification and I was forced to insert the parameter again.

Will be an update to fix this issue?

Moreover, in Dashboard, at Core version, is written 7.0.3 (available).
If I check from Software Management, the messages said that no updates are available.
If I check from CLI, same messages.

Code: [Select]
:~$ sudo apt-get update
Hit:1 http://ro.archive.ubuntu.com/ubuntu focal InRelease
Hit:2 http://ro.archive.ubuntu.com/ubuntu focal-updates InRelease
Hit:3 http://ro.archive.ubuntu.com/ubuntu focal-backports InRelease
Hit:4 http://packages.zentyal.org/zentyal 7.0 InRelease
Hit:5 http://ppa.launchpad.net/oisf/suricata-stable/ubuntu focal InRelease
Hit:6 http://security.ubuntu.com/ubuntu focal-security InRelease
Reading package lists... Done
:~$
:~$ sudo apt-get install zentyal-core
Reading package lists... Done
Building dependency tree
Reading state information... Done
zentyal-core is already the newest version (7.0.3).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
:~$
:~$ sudo apt-get install zentyal-software
Reading package lists... Done
Building dependency tree
Reading state information... Done
zentyal-software is already the newest version (7.0.0).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
:~$

Thank you again for your future help/answers.
Kind regards,
Gabriel

6
Hi Daniel,

Sorry for my late feedback!
After I made the correction as you said, it works now.
Thank you for your help!

Kind regards,
Gabriel

7
Hi Daniel,

I sent you a PM.

The file '/etc/resolv.conf' is not empty.

Kind regards,
Gabriel

8
Hi everyone!

Fresh installation of Zentyal 7.0 for using as Authoritative DNS Server, so only few modules installed: Network, Firewall, DNS, Logs.

After first configuration and first reboot, as many of you, I did not able to do updates, even if the available updates were shown in Dashboard / Software Management.

Following @mscfw hint https://forum.zentyal.org/index.php/topic,35174.msg114308.html#msg114308, I did the updates (Core to 7.0.3 and other Zentyal software).

After reboot, same issue: Temporary failure in name resolution

Does anybody know how to fix this, or we must to wait an update from Zentyal?

I have the same configuration with Zentyal 6.2 and it works like a charm.

Kind regards,
Gabriel

cc @webmaster

9
3 out of 4 of my Zentyal 4 servers I am running right now work flawlessly as PDC with mail and groupware.
One thing that you ned to do after getting everything all up and running is open a terminal and install Sogo ActiveSync:
sudo apt-get install sogo-activesync

Then go into your Zentyal Admin Panel and navigate to Mail > Openchange and check the ActiveSync box.  After that is all done then your Android, IOS and Windows Phone devices will all work flawlessly too!
No clue on why that package isn't just installed automatically though.

Especially after remaining just Sogo ActiveSync! ;)

10
It is good to hear of a positive experience.  It seem as if the mail side is robust from your experience.The sogo,samba and openchange bits are the areas where I seem to hit most trouble.
Jodel

Hi Jodel,

Indeed, I have a positive experience with Zentyal as e-mail server.

Next, I will try to replace my PDC/AD/File Server/Print Server on Windows 2k8 Std with Zentyal or NethServer.
My first option is Zentyal because of Samba4.
I'm not sure yet in what configuration (PDC/AD/File Server;  PDC/AD with FreeNas as File Server;  PDC/AD with Openmediavault as File Server).
I'm sure I cannot use it as Print Server. I have Canon Color MF with network scanner and I have no drivers to use them at full capacities.

Gabriel

11
Hi guys,

I use Zentyal community/development edition (now 4.2.1.3) from about 2 years, till now only as E-mail server, in the following configuration:
- placed in DMZ (Endian 3.05 beta1 community edition).
- all filters (SMTP Proxy, POP3 Proxy, Black and Whitelists, Spam Filters, Virus Scanner) are made by Endian.
- no AD integration.
- external NS.
- multi domains: 7 different domains with approximative 100 mailboxes.
- because of multi domains, Callendar Sharing and Contacts Sharing are disabled.
- works without issues on: Blackberry, Windows Phone, iPhone, Android (IMAP, POP3, Exchange).
- works without issues on desktops: Outlook 2010, 2013, Thunderbird (IMAP, POP3, Exchange).

Notes:
- After the upgrade to 4.2, I didn't have issues with Openchange.
- Restat the server only when updates/upgrades ask.
- A few minor issues during some updates, solved after a few CLI commands.
- I have tested a few months ago, for a very short time, Calendar Sharing and it works well from Sogo to Thunderbird, if i remember well. I don't remember if worked from Thunderbird to Sogo or from Sogo to Outlook and vice versa.

In the next couple of months, I will try to setup Zentyal as E-mail Server on a separate machine, only for my company, to use Callendar Sharing and Contacts Sharing (placed in DMZ, all filters on Endian, no AD integration).

12
News and Announcements / Re: Zentyal 4.2 available!
« on: December 29, 2015, 09:50:42 am »
I am talking to Z 4.0 . I need backup/restore files that Z 4.2 don't have and Z 4.0 have. Do you have any download link of Z 4.0?

I know, but I don't think win 10, win 8 will work.

Z 4.0: http://sourceforge.net/projects/zentyal/files/Old%20versions/

13
News and Announcements / Re: Zentyal 4.2 available!
« on: December 29, 2015, 09:01:26 am »
Is Z 4.0 can support windows 10 active directory and domain directory? Because Z 2.0 can only support windows XP that's why i want to upgrade my server.

And can you give the download link of Z 4.0?

I really don't know. I use Z 4.2 as Multidomain Email Server in DMZ (with Endian as UTM).

But according to this: https://wiki.zentyal.org/wiki/Zentyal_4.2_Announcement, it works.

Download link for 4.2: http://www.zentyal.org/server/

14
News and Announcements / Re: Zentyal 4.2 available!
« on: December 29, 2015, 07:52:28 am »
Hi RAAC,

You are right, there is no more options to configure how local backup to be made but there is still option to backup your system.
Beginning with Z 4.0, they drastically reduced the functionality of the Zentyal.  :(

There are many other distros that have extended options for backup configuration (NethServer - AiO Server; Endian - UTM; ...). You can try if you want to be "up to date" (Z 2.0 is stable but to old and you are not satisfied with Z 4.2).  ;)

HAPPY NEW YEAR!  :)

15
News and Announcements / Re: Zentyal 4.2 available!
« on: December 24, 2015, 07:17:02 pm »
Guys why in this version(Development 4.2) there is no Backup files? In version 2.0 (currently use) there is Backup files option under system. Please help, i can't  schedule my backup.

Are you sure?
System -> Configuration Backup: Cloud and Local

Pages: [1] 2