This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Re: [Solved]No internet access after installing Zentyal in Ubuntu 12.04
« on: May 27, 2014, 11:44:38 am »
Hello again,
Now I am trying to create subnets using Zentyal's Web Interface, but I can't find anything..
My machine has one Network Interface Card and I want to create one subnet so as
to share ip addresses to other machines using the same network with my Zentyal server.
Zentyal Server runs in a machine with IP 192.168.x.x
(Network->Interfaces) eth0 DHCP and I want to give
other machines IPs in a range between 10.10.10.1-10.10.10.245 e.t.c.
Any help please?
EDIT:
I am still stuck on the same issue.
I think what I am trying to do is to use Zentyal as the only router through
which all PCs will be connected to the internet. The only PC to be directly connected to
the internet will be my Zentyal Server machine (wired connection). Other PCs will
access the internet through ip addresses which are given to them by Zentyal.
I have made a careful research on the internet,
but I can't find from where to start. Maybe I have to start with subneting
my Zentyal's IP 192.168.x.x so as to give a unique IP to every other computer..
Because I am a beginner, I am asking again for your help
Every helpful answer is welcome!!!
Now I am trying to create subnets using Zentyal's Web Interface, but I can't find anything..
My machine has one Network Interface Card and I want to create one subnet so as
to share ip addresses to other machines using the same network with my Zentyal server.
Zentyal Server runs in a machine with IP 192.168.x.x
(Network->Interfaces) eth0 DHCP and I want to give
other machines IPs in a range between 10.10.10.1-10.10.10.245 e.t.c.
Any help please?
EDIT:
I am still stuck on the same issue.
I think what I am trying to do is to use Zentyal as the only router through
which all PCs will be connected to the internet. The only PC to be directly connected to
the internet will be my Zentyal Server machine (wired connection). Other PCs will
access the internet through ip addresses which are given to them by Zentyal.
I have made a careful research on the internet,
but I can't find from where to start. Maybe I have to start with subneting
my Zentyal's IP 192.168.x.x so as to give a unique IP to every other computer..
Because I am a beginner, I am asking again for your help
Every helpful answer is welcome!!!
2
Installation and Upgrades / Re: No internet access after installing Zentyal in Ubuntu 12.04
« on: May 21, 2014, 01:31:18 pm »Oh you 're right!
I configured my network as DHCP, check External and now I can access the internet!
Thank you!!! I hadn't realized that the problem has to do with leaving my eth0 unconfigured..
3
Installation and Upgrades / Re: No internet access after installing Zentyal in Ubuntu 12.04
« on: May 21, 2014, 11:32:10 am »
I go to Network -> Tools (in Zentyal's Web Interface)
but when I ping 8.8.8.8 or google.com I get:
ping: unknown host gogle.com
connect: Network is unreachable
The same messages I get from my terminal..
but when I ping 8.8.8.8 or google.com I get:
ping: unknown host gogle.com
connect: Network is unreachable
The same messages I get from my terminal..
4
Installation and Upgrades / [Solved]No internet access after installing Zentyal in Ubuntu 12.04
« on: May 21, 2014, 11:11:13 am »
Hello,
I have installed Zentyal in my Ubuntu 12.04 OS for a some time now, but today
I can't access the internet. I get "Server not found" for every web page I enter
in my Mozilla Firefox. Since yesterday I was able to access the internet!
I think it has to do with Zentyal, but yesterday I did not make any configuration..
Top right in my Ubuntu Desktop, shows that I am connected to internet through "Wired Connection"
and by typing
eth0 Link encap:Ethernet HWaddr
inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3105 errors:0 dropped:0 overruns:0 frame:0
TX packets:61 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:375798 (375.5KB) TX bytes:7065 (7.0 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask|:255.0.0.0
UP LOOBACK RUNNING MTU:65536 Metric:1
RX packets:6119 errors:0 dropped:0 overruns:0 frame:0
TX packets:6119 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2179194 (2.1 MB) TX bytes:2179194 (2.1 MB)
However, I can access Zentyal's Web Interface.
Can anyone please help me?
EDIT: (more info)
(Network->Interface)
Name: eth0
Method: No set
(Module Status)
Network, Firewall, DNS, Events, Logs, NTP, Users and Groups
I have installed Zentyal in my Ubuntu 12.04 OS for a some time now, but today
I can't access the internet. I get "Server not found" for every web page I enter
in my Mozilla Firefox. Since yesterday I was able to access the internet!
I think it has to do with Zentyal, but yesterday I did not make any configuration..
Top right in my Ubuntu Desktop, shows that I am connected to internet through "Wired Connection"
and by typing
Code: [Select]
ifconfig
in terminal I get:eth0 Link encap:Ethernet HWaddr
inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3105 errors:0 dropped:0 overruns:0 frame:0
TX packets:61 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:375798 (375.5KB) TX bytes:7065 (7.0 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask|:255.0.0.0
UP LOOBACK RUNNING MTU:65536 Metric:1
RX packets:6119 errors:0 dropped:0 overruns:0 frame:0
TX packets:6119 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2179194 (2.1 MB) TX bytes:2179194 (2.1 MB)
However, I can access Zentyal's Web Interface.
Can anyone please help me?
EDIT: (more info)
(Network->Interface)
Name: eth0
Method: No set
(Module Status)
Network, Firewall, DNS, Events, Logs, NTP, Users and Groups
5
Installation and Upgrades / Re: How to access Zentyal's Web interface from my IP address
« on: May 10, 2014, 01:43:51 pm »
Thanks!!! The link was very useful
I changed my adapter's network settings from to Bridged to NAT, I add some rules
and now I can access my Zentyal's Web interface from every PC's browser found in the
same network!
I changed my adapter's network settings from to Bridged to NAT, I add some rules
and now I can access my Zentyal's Web interface from every PC's browser found in the
same network!
6
Installation and Upgrades / Re: How to access Zentyal's Web interface from my IP address
« on: May 09, 2014, 11:42:08 am »@jbahillo:
Point 1 was solved by reinstallling Zentyal Server in VirtualBox
Now I am looking for accessing Zentyal's Web interface through my ip address.
7
Installation and Upgrades / How to access Zentyal's Web interface from my IP address
« on: May 09, 2014, 10:44:57 am »
Hello,
I installed Zentyal Server 3.4 in Oracle's VitualBox 4.3 (and all these works in Ubuntu Desktop 12.04).
*my_ip_adr : Is my IP address I get from config (in my main OS's terminal)
What I want is by typing https://<my_ip_adr> to my MAIN firefox and of course to
my Server's firefox to be able to access Zentyal's Web interface.
Can anyone help me?
I installed Zentyal Server 3.4 in Oracle's VitualBox 4.3 (and all these works in Ubuntu Desktop 12.04).
- By typing https://localhost (in server's firefox) I am successfully connected to the Zentyal's Web interface
- By typing https://<my_ip_adr> or <my_ip_adr> (in server's firefox) I get: It Works!
- By typing https://localhost (in my main firefox) I get: It Works!
- By typing https://<my_ip_adr> or <my_ip_adr> (in my main firefox) I get: It Works!
*my_ip_adr : Is my IP address I get from config (in my main OS's terminal)
What I want is by typing https://<my_ip_adr> to my MAIN firefox and of course to
my Server's firefox to be able to access Zentyal's Web interface.
Can anyone help me?
Pages: [1]