Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
76
German / Re: Zertifikate richtig erstellen?
« on: January 09, 2012, 12:30:32 pm »
Die Meldung des Mailclients ist wohl normal, da es sich ja um ein selbsterzeugtes Zertifikat handelt. Ich nutze Thunderbird und hier kann ich dem Programm sagen, dass es sich um ein gültiges Zertifikat handelt. Die Option sollte aber in vielen Mailprogrammen verfügbar sein. Danach meckert das Programm nicht mehr .... 
.
.
77
German / Systemmails umleiten
« on: December 18, 2011, 02:18:04 pm »
Hallo Zentyal-Freunde 
,
hurra, es gibt ein deutsches Forum. Da fällt das Beschreiben von Problemen oder Lösungen doch einfacher
.
Ich habe bei mir auch einen Zentyal-Server in meinem kleinen Heimnetzwerk laufen und bin soweit auch ganz zufrieden. Ich nutze den Server eigentlich nur als Gateway (incl. VPN), Mail- und Fileserver. Habe da aber noch eine Frage und hoffe auf Hilfe:
Das System sendet Meldungen ja an die User root bzw. den Usernamen zur Administration von Zentyal. Diese Mails werden ja im mbox-Format gespeichert. Ich hätte die aber gerne umgeleitet auf meinen vmail-Account [edit] (ohne Zafara)[/edit]. Hat da jemand einen Tipp für mich, wie und wo ich das konfigurieren muss? Über die "normale" Verwaltungsoberfläche von Zentyal geht das ja wohl nicht. Ich hatte dieses Thema vor einigen Jahren auf einem Debian-Server schon mal gelöst, aber ich weiß nicht mehr genau, was ich damals gemacht habe ...
.
In der Hoffnung auf Hilfe
Gruß Stefan
,hurra, es gibt ein deutsches Forum. Da fällt das Beschreiben von Problemen oder Lösungen doch einfacher
.Ich habe bei mir auch einen Zentyal-Server in meinem kleinen Heimnetzwerk laufen und bin soweit auch ganz zufrieden. Ich nutze den Server eigentlich nur als Gateway (incl. VPN), Mail- und Fileserver. Habe da aber noch eine Frage und hoffe auf Hilfe:
Das System sendet Meldungen ja an die User root bzw. den Usernamen zur Administration von Zentyal. Diese Mails werden ja im mbox-Format gespeichert. Ich hätte die aber gerne umgeleitet auf meinen vmail-Account [edit] (ohne Zafara)[/edit]. Hat da jemand einen Tipp für mich, wie und wo ich das konfigurieren muss? Über die "normale" Verwaltungsoberfläche von Zentyal geht das ja wohl nicht. Ich hatte dieses Thema vor einigen Jahren auf einem Debian-Server schon mal gelöst, aber ich weiß nicht mehr genau, was ich damals gemacht habe ...
.In der Hoffnung auf Hilfe
Gruß Stefan
78
Installation and Upgrades / Re: [solved] losing lan connection to zentyal temporary
« on: September 17, 2011, 01:45:33 pm »
My problem is still gone ....
I assume that there is a hardware problem with both onboard NIC's and that it wasn't a problem of ubuntu ....
Good to know that your problem is somewhat solve.
Problem you initially described was very similar to the one I got with Realtek, reason why I made this comment in my first reply.
Then, issue has been solved in kernel for Realtek. Perhaps it's worth to check status for you VIA Rhine card...
I assume that there is a hardware problem with both onboard NIC's and that it wasn't a problem of ubuntu ....
79
Installation and Upgrades / Re: losing lan connection to zentyal temporary
« on: September 11, 2011, 08:25:01 pm »
Here is the preliminary result:
I installed another NIC and I disabled the Onboard-NIC. Since two hours the problem is gone .... and I hope it will stay away .
Because I did my tries with different hardware I assumed that I did some misconfiguration and that there is no hardware problem. But I used very similar mainboards both with a f***ing VIA Rhine NIC onboard
.
So thank you to all the guys who led me to the hardware way ...... and yes: Zentyal is a great system with a fantastic forum .
I installed another NIC and I disabled the Onboard-NIC. Since two hours the problem is gone
.... and I hope it will stay away .Because I did my tries with different hardware I assumed that I did some misconfiguration and that there is no hardware problem. But I used very similar mainboards both with a f***ing VIA Rhine NIC onboard
.So thank you to all the guys who led me to the hardware way ...... and yes: Zentyal is a great system with a fantastic forum .
80
Installation and Upgrades / Re: losing lan connection to zentyal temporary
« on: September 09, 2011, 12:40:51 pm »
@christian:
I will try to change the NIC and I will post the results.
I will try to change the NIC and I will post the results.
81
Installation and Upgrades / Re: losing lan connection to zentyal temporary
« on: September 04, 2011, 09:39:17 pm »
This weekend I did some testing and the result is surprising for me:
I worked on a WinXP client and I had an open DOS Window. Additionally I had an ssh client session to my server. While the ping in the dos box gets the timeout error, the connection in the ssh session still worked .... ? Both session were using the name of the server and not the IP address to get the connection.
So is there someone with an idea?
I worked on a WinXP client and I had an open DOS Window. Additionally I had an ssh client session to my server. While the ping in the dos box gets the timeout error, the connection in the ssh session still worked .... ? Both session were using the name of the server and not the IP address to get the connection.
So is there someone with an idea?
82
Installation and Upgrades / Re: losing lan connection to zentyal temporary
« on: September 02, 2011, 10:11:39 pm »
@christian: I'm using a VIA Rhine NIC ...
83
Installation and Upgrades / Re: losing lan connection to zentyal temporary
« on: August 26, 2011, 01:00:41 pm »In order to isolate domains for investigation: what if you ping IP address instead of FQDN? (this to ensure DNS is not used and out of the investigation scope).timeout
And what if you "traceroute"?also timeout
BTW, which version are you using? I'm asking because Linux kernel solved (I hope) some similar issue with Realtek network some time ago...That sound interesting. I will check if I use Realtek NIC. My Version is [edit]2.02.[/edit]
84
Installation and Upgrades / [solved] losing lan connection to zentyal temporary
« on: August 13, 2011, 09:48:59 pm »
When my XP-Clients are logged in to my Zentyal-server (working as PDC, DHCP, DNS, MAIL, Gateway etc.) and there is temporary no active traffic from the client to the server, very often the lan connection is lost. There is no way to ping the server. All the other IP's in my network I can ping. It happens too when the notebooks are reactivated after a standby. The internal NIC in the server has 3 additional IP's. To get the connection working again I have to ping a couple of times to the different server-IP's and as if by a miracle the ping to the server is working again and 'normal' work for the clients is possible.
First I thought I made some misconfiguration in the DNS/DHCP area. So I set up a new server without editing manually the config files (what I did for the first time in the DNS/DHCP area). I also read the parts of the documentation to do the configuration right. But the problem is still existing.
I configured the DNS as dynamic. Could the problem result in this? How can I deactivate the dynamic? When I edit the DNS section in the GUI there is no possibilty to deactivte it. I'm working on a linux server as a small home server for a couple of years. In the past I used debian and I did all the configuration manually. I was hard work (for me) but it ran finally. But I never had problems like this.
[edit]
I don't think it's a hardware problem, because the new server has complete different hardware.
[/edit]
So what can I do? Which information I have to post to get some help?
First I thought I made some misconfiguration in the DNS/DHCP area. So I set up a new server without editing manually the config files (what I did for the first time in the DNS/DHCP area). I also read the parts of the documentation to do the configuration right. But the problem is still existing.
I configured the DNS as dynamic. Could the problem result in this? How can I deactivate the dynamic? When I edit the DNS section in the GUI there is no possibilty to deactivte it. I'm working on a linux server as a small home server for a couple of years. In the past I used debian and I did all the configuration manually. I was hard work (for me) but it ran finally. But I never had problems like this.
[edit]
I don't think it's a hardware problem, because the new server has complete different hardware.
[/edit]
So what can I do? Which information I have to post to get some help?
85
Installation and Upgrades / Re: logon.bat question using PDC
« on: August 13, 2011, 06:31:56 pm »
you can also create a computername.bat for each machine in the same directory and in the logon.bat you only need to add the following line:
So when the users login first the common logonfile will be executed and then the machine specific logon will work.
Code: [Select]
call %computername%.batSo when the users login first the common logonfile will be executed and then the machine specific logon will work.
86
Installation and Upgrades / Re: moving XP-Clients vom one zentyal-PDC to another zentyal-PDC
« on: August 11, 2011, 05:43:35 pm »
Thanks for your comments. It seems to be not so easy for me because I'm a hobby administrator with only half knowledge.
I don't know yet what I will do ...
Thanks.
I don't know yet what I will do ...
Thanks.
87
Installation and Upgrades / Re: Active Directory Windows Server 2008R2 and Zentyal Settings
« on: August 02, 2011, 12:17:48 am »
As far as I know you have to ENABLE the firewall of a Windows Server 2008R2. Otherwise the disabled firewall will block everything. Normally it makes no sense but in my case (not with zentyal) it worked ....
88
Installation and Upgrades / moving XP-Clients vom one zentyal-PDC to another zentyal-PDC
« on: August 02, 2011, 12:10:37 am »
I have a really problem:
I have an "old" server with Zentyal which acts as a PDC for my XP-Clients (in my small local family network). Now I have to move all the users to the new zentyal-PDC (same software version) with the identically domainname. I checked the move with my laptop and my account and it worked with my existing account (the desktop and all my user settings still remains the same). But when I try to move the other users a new account is created on the PC like username.domainname.000 and all the user settings are lost.
Is there anyone who knows a better way than installing and configuration everthing again for every user? Using a backup of the old server on the new one is not a good idea because there is some misconfiguration on the old server. And I don't want to have the problems on the new one ....
I have an "old" server with Zentyal which acts as a PDC for my XP-Clients (in my small local family network). Now I have to move all the users to the new zentyal-PDC (same software version) with the identically domainname. I checked the move with my laptop and my account and it worked with my existing account (the desktop and all my user settings still remains the same). But when I try to move the other users a new account is created on the PC like username.domainname.000 and all the user settings are lost
.Is there anyone who knows a better way than installing and configuration everthing again for every user? Using a backup of the old server on the new one is not a good idea because there is some misconfiguration on the old server. And I don't want to have the problems on the new one ....
89
Installation and Upgrades / error message when starting mail module
« on: June 28, 2011, 09:38:34 pm »
Hi all,
i get the following error message when I try to start the mail module:
Cannot use domainname as alias for a mail domain because a domain with this name already exists
domainname is the name of my domainname in the internet for my mail adresses. I know that I tried a lot of things in the configuration of zentyal an I made a lot of mistakes in the past. But actually I can't find the entry for this problem.
Can anybody help me?
Regards,
Stefan
i get the following error message when I try to start the mail module:
Cannot use domainname as alias for a mail domain because a domain with this name already exists
domainname is the name of my domainname in the internet for my mail adresses. I know that I tried a lot of things in the configuration of zentyal an I made a lot of mistakes in the past
. But actually I can't find the entry for this problem. Can anybody help me?
Regards,
Stefan
90
Installation and Upgrades / Re: Problem with DNS module
« on: March 19, 2011, 11:02:24 pm »The domain name with underscores are not valid [1]. I think bind9 does not allow names with underscores... Anyway, you can try it out by skipping checks when adding the domain in /usr/share/perl5/EBox/DNS/Model/HostnameTable by comment out line 114:I have the same problem, but in my actual version of Zentyal there is no line with checkDomainName ... in the mentioned file.Code: [Select]# checkDomainName($param{'hostname'}, __("Domain name"));
Is there another solution?
Regards,
Stefan