Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - fatbob

Pages: 1 2 [3] 4 5 ... 7
31
Having looked at the logs I've concluded that it doesn't

So zentyal virtualisation:
-No working console mechanism
-No ability to shutdown the system from the ui
-Doesn't use acpi shutdown when closing down
-Poor documentation.

In conclusion
- it's probably not as production ready as I might want it to be.

32
Hi there

I have a single turnkey linux vm running on my zentyal box under the vm manager.

It runs a wiki and I found I had some database corruption on the vm. ACPI is enabled on the vm and works under virtual box - ie I can issue an acpi shutdown and it goes down correctly. (FYI I needed to install the acpi-support package to get this to work)

I have rebooted my zentyal box a couple of times since it's been installed

So my question is when I shutdown zentyal does it issue a shutdown command to the virutal machine, or just turn it off?


33
Looks like ticket 6372 has been raised for this issue

34
So set my internet interface to bridged and created a new bridge with the same ip that was statically assigned to eth0

pretty obvious really

35
Hi folks

I just installed a bunch of system updates for DNS that caused the Zarafa dns module to be unistalled, and uninstallable due to dependancy issues.

Thankfully I'd imaged the system before applying the updates and simply reverted it but for the moment I wouldn't install them.


36
Hi there

I want to configure a VM on zentyal so that it's interface is bridged to the local network. However when I select bridged the "bridged to" box only contains none. It does not contain my lan interface. How do you make this work

I have a zentyal box with a single interface and a statically assigned IP.
 

37
Yeah no worries Javier as long as it's reached the right people. Not a serious issue for me anyway

38
Raised Case #6363

39
Great thanks

Have you raised a ticket for this? If not I don't mind doing it.

Cheers
f

40
Hi Folks

I applied all the latest updates on Saturday (2013-03-23) and since then Anacron as been mailing me the following errors:

/etc/cron.daily/logrotate:
error: clamav-daemon:1 lines must begin with a keyword or a filename (possibly in double quotes)
error: clamav-daemon:10 unexpected }
error: found error in file clamav-daemon, skipping

Any ideas?

41
Installation and Upgrades / Re: VPN with only 1 network interface
« on: March 25, 2013, 12:57:31 pm »
Hi yes it is certainly possible to do this. I've done it in Zentyal 3 quite easily.

I have a single zentyal 3 server. It is not the lan gateway. The interface is configured as internal. (192.168.1.15)
The lan gateway is a linksys router connected to the cable broadband. (192.168.1.1)
The OpenVPN clients are allocated IP's in the reange (192.168.10.1 - 254)

I set up OpenVPN server to listen on all network interfaces, enabled NAT etc.

OpenVPN listens on UDP port 1194 by defualt.

I forwarded this port on the linksys router to the zentyal box 192.168.1.15

I added a static route to the linksys routers config to 192.168.10.0 / mask 255.255.255.0 with a gateway of 192.168.1.15. This enabled traffic on my lan to be directed to the zentyal box which is acting as the gateway for vpn'd systems.

Hope that helps 

42
Email and Groupware / Re: Where is the mail stored in the filesystem?
« on: March 25, 2013, 01:02:04 am »
Yes indeed there is a very large /var/lib/mysql/ibdata1 file. :) I'm afraid i didn't specify anything I just installed the zarafa module on zentyal and this is just a straight install from the zentyal cd so if this type of configuration is bad then I guess the developers should sort it :)

I was wondering about backing this file up. I run automysqlbackup which backs up all the databases. Will this be included somewhere? In the zarafa db backup? I wonder because it's sat outside the zarafa folder?

43
Unfortunately this still isn't working for one Vista SP2 box

44
Email and Groupware / Re: Where is the mail stored in the filesystem?
« on: March 24, 2013, 05:33:26 pm »
Well then I still have a problem. The zarafa database in /var/lib/mysql/zarafa is only 2.6mb in size and I can't find the mail in there. So I'm back to the same question

Where is the mail?


45
Email and Groupware / Re: Where is the mail stored in the filesystem?
« on: March 24, 2013, 03:06:02 pm »
Hi there

Firstly thanks for everybodies help on this.

I'm running zentyal 3.0 (core 3.0.17) so what I'm about to say may not be relevant to earlier versions.

there are a few corrections to what folks have said on here.

Mysql parameters are
hostname 127.0.0.1
port 3306
username root

passord is in /var/lib/zentyal/conf/zentyal-mysql.passwd

The mail isn't actually stored in the MySql zarafa db. I loaded around 8000 mail items into the zarafa and it didn't significatnly affect the size of the database.

The mail and also the zarafa-search indexes (if enabled) are actually stored in the file systm under /var/lib/zarafa.

The configuration files would give the impression that this is just attachments but it appears to be all emails as well. Each email and attachement is stored in a nested, numbered folder structure as a gziped file.

I wanted all my data stored on a NAS rather then on the server itself. This was quite easy to achive for the mail. It was simply a matter of copying /var/lib/zarafa to a new location and then creating a symlink from the /var/lib folder to the new location.

Thanks for all your help folks

Pages: 1 2 [3] 4 5 ... 7