Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Can't call method "get_value"
« on: December 27, 2011, 10:11:04 am »
Hello everyone,
First of all, merry christmas and a happy new year!
I'm getting the error stated below in the groups section on the slave when i click on "Edit"
Can't call method "get_value" on an undefined value at /usr/share/perl5/EBox/SambaLdapUser.pm line 741.
Logfiles do not show any errors.
Please advice.
First of all, merry christmas and a happy new year!
I'm getting the error stated below in the groups section on the slave when i click on "Edit"
Can't call method "get_value" on an undefined value at /usr/share/perl5/EBox/SambaLdapUser.pm line 741.
Logfiles do not show any errors.
Please advice.
2
Installation and Upgrades / Zentyal Master/Slave, slave does not make the group share.
« on: November 24, 2011, 11:09:10 am »
Hello everyone,
I just made a successful master/slave connection. Working perfectly.
But what riddles me is that when i make a group share on the master... should it automatically be created on the slave as well?
Like when i make a (pdc) TESTDOMAIN with 2 servers RUTH (master) and RACHEL (slave)
I made a group named "Support" with a share named "Support". Under Rachel and Ruth both are appearing like expected. But when i want to access rachel (slave) it doesn't give me access. I checked wheter my user is deployed under the group "Support" and it was so no errors from there.
When i press change, it will create the folder and i have access. But it should've done that automatically, right?
Does zentyal sync these folders too?
I just made a successful master/slave connection. Working perfectly.
But what riddles me is that when i make a group share on the master... should it automatically be created on the slave as well?
Like when i make a (pdc) TESTDOMAIN with 2 servers RUTH (master) and RACHEL (slave)
I made a group named "Support" with a share named "Support". Under Rachel and Ruth both are appearing like expected. But when i want to access rachel (slave) it doesn't give me access. I checked wheter my user is deployed under the group "Support" and it was so no errors from there.
When i press change, it will create the folder and i have access. But it should've done that automatically, right?
Does zentyal sync these folders too?
3
Installation and Upgrades / Disaster Recovery
« on: November 23, 2011, 11:15:31 am »
Hi everyone,
Let's say you made a stupid mistake (believe me i did a couple of times) did a 'rm -rf /*' and you lost all your data. What's the easiest way to get zentyal completely up and running.
What do you need to backup to minimize the downtime?
I am really curious in what people, who work with zentyal, do to protect their data.
Thanx!
Let's say you made a stupid mistake (believe me i did a couple of times) did a 'rm -rf /*' and you lost all your data. What's the easiest way to get zentyal completely up and running.
What do you need to backup to minimize the downtime?
I am really curious in what people, who work with zentyal, do to protect their data.
Thanx!
4
Installation and Upgrades / User can't authenticate while internet is down?
« on: November 02, 2011, 12:11:19 pm »
Hello zentyal users,
I've come across a strange little thing. Internet went offline yesterday morning. When i tried to login it jammed on everything. But it should not matter because it's an internal connection you make to your LDAP server or am i wrong?
Thanx
I've come across a strange little thing. Internet went offline yesterday morning. When i tried to login it jammed on everything. But it should not matter because it's an internal connection you make to your LDAP server or am i wrong?
Thanx
5
Installation and Upgrades / VPN tunnel to tunnel problem
« on: October 30, 2011, 02:47:04 pm »
Hello zentyal users,
10.0.0.11 Zentyal server in the branch office
10.1.0.100 Zentyal main server in the central office
What am i trying to do? I'm trying to connect the 2 different networks with eachother
What works? I can connect to 10.1.0.100 on 10.0.0.11
What doesn't work After i've done the VPN connection, my clients on 10.0.0.x aren't able to connect to zentyal.
I put 10.0.0.0 and 10.1.0.0. in the advertised network sections.
On 10.0.0.11 a tap0 adapter is created with the ip 192.168.160.2 which allows a connection from 10.0.0.11 to 10.1.0.100
From let's say 10.0.0.209 (a desktop computer) can't reach anything anymore.
Does anyone know what's wrong with this?
Thanx in advance.
10.0.0.11 Zentyal server in the branch office
10.1.0.100 Zentyal main server in the central office
What am i trying to do? I'm trying to connect the 2 different networks with eachother
What works? I can connect to 10.1.0.100 on 10.0.0.11
What doesn't work After i've done the VPN connection, my clients on 10.0.0.x aren't able to connect to zentyal.
I put 10.0.0.0 and 10.1.0.0. in the advertised network sections.
On 10.0.0.11 a tap0 adapter is created with the ip 192.168.160.2 which allows a connection from 10.0.0.11 to 10.1.0.100
From let's say 10.0.0.209 (a desktop computer) can't reach anything anymore.
Does anyone know what's wrong with this?
Thanx in advance.
6
Installation and Upgrades / What is the best way to do a master slave setup from a branch office?
« on: August 22, 2011, 03:41:28 pm »
Hey everyone,
In a couple of months we will have a branch office and a central office.
It needs the following things
I have a couple of ideas... one of them is using a VPN which connects the two locations.
Another idea is make the two locations accessible from the internet by adding some firewall rules.
What's the best way to do this?
In a couple of months we will have a branch office and a central office.
It needs the following things
- A couple of shares that should be accessible from both locations
- A central user administration (this should be possible with the master/slave setup)
- Access all clients in the network
I have a couple of ideas... one of them is using a VPN which connects the two locations.
Another idea is make the two locations accessible from the internet by adding some firewall rules.
What's the best way to do this?
7
Installation and Upgrades / [SOLVED] Troubles with internal lookups (DNS/DHCP)
« on: August 19, 2011, 04:53:56 pm »
Hello,
I have a problem with my dns records. Basically when i ping my client "desktop01" it cannot be found.
My main server is: server01.domain.com. (I want an alias with lasvegas) with IP 192.168.0.1
My client (desktop01) has IP 192.168.0.101 trough fixed DHCP adress works fine.
But when i do ping lasvegas or ping desktop01 on the server as well as on the client it can´t resolve anything.
Does anyone have a clue about what's going on here?
BTW search domains are specified in network settings aswell as in the clients dhcp config.
Thanx!
I have a problem with my dns records. Basically when i ping my client "desktop01" it cannot be found.
My main server is: server01.domain.com. (I want an alias with lasvegas) with IP 192.168.0.1
My client (desktop01) has IP 192.168.0.101 trough fixed DHCP adress works fine.
But when i do ping lasvegas or ping desktop01 on the server as well as on the client it can´t resolve anything.
Does anyone have a clue about what's going on here?
BTW search domains are specified in network settings aswell as in the clients dhcp config.
Thanx!
8
Installation and Upgrades / Is it possible to add ldap users by a shell command?
« on: July 31, 2011, 06:31:37 pm »
Read subject.
Further info:
I'm developing new software for my company and i need a basic understanding of how zentyal adds users to the LDAP database so i can program something that can carry out those actions. Are there any shell commands to add a LDAP user?
Thanx!
Further info:
I'm developing new software for my company and i need a basic understanding of how zentyal adds users to the LDAP database so i can program something that can carry out those actions. Are there any shell commands to add a LDAP user?
Thanx!
9
Installation and Upgrades / How to add a user from command line or script?
« on: July 28, 2011, 11:21:43 am »
Hi everyone,
I currently have 4 places where i have to create new users. I want to build a program that creates the user for all 4 applications, starting with zentyal. So my question is: Is there a way to add a user trough a script or command?
Thanx
I currently have 4 places where i have to create new users. I want to build a program that creates the user for all 4 applications, starting with zentyal. So my question is: Is there a way to add a user trough a script or command?
Thanx
10
Installation and Upgrades / DHCP Server not working?
« on: June 10, 2011, 03:48:28 pm »
Ok guys, it's been hours and i've still haven't found a way i can get the dhcp server working.
This is my situatation
Speedtouch Router (172.16.0.254) <--> Zentyal (172.16.0.1) <-- i configured this as a static IP.
DNS 127.0.0.1 / 172.16.0.254
Gateway 172.16.0.254
DHCP settings are as followed:
Default gateway : Zentyal (i tried 172.16.0.254)
Primary Nameserver : local Zentyal DNS.
Windows Computer (Which should use the DHCP server) is connected to the router at (172.16.0.254).
What am i doing wrong?? It can't reach the DHCP server somehow.
This is my situatation
Speedtouch Router (172.16.0.254) <--> Zentyal (172.16.0.1) <-- i configured this as a static IP.
DNS 127.0.0.1 / 172.16.0.254
Gateway 172.16.0.254
DHCP settings are as followed:
Default gateway : Zentyal (i tried 172.16.0.254)
Primary Nameserver : local Zentyal DNS.
Windows Computer (Which should use the DHCP server) is connected to the router at (172.16.0.254).
What am i doing wrong?? It can't reach the DHCP server somehow.
11
Installation and Upgrades / Zentyal Desktop Syncing Problem
« on: June 01, 2011, 12:16:46 pm »
Hello Everyone,
First i would like to thank the developers for making such an awesome small business server. We started working with ebox/zentyal when Ubuntu 9.04 came out. Really good release and zentyal desktop worked perfectly. Since 10.04 came out we did a little uprade which caused a lot of problems. The syncing part of the desktop doesn't really work as it should.
Let's say i made a new file or folder on my desktop, i log off, pc starts syncing and pc logs me off. When i go back to the office and sit down at another computer and try to login, it doesn't sync my files, i get a clean new desktop. Why doesn't it sync, does anyone know what happends here?
And there a couple of other things that are really weird, i will not bore everyone today with these matters, for now the syncing part is important to me. BTW if i log on the same computer i saved the files/folders on, it does display them but not on another computer.
Thanx in advance.
First i would like to thank the developers for making such an awesome small business server. We started working with ebox/zentyal when Ubuntu 9.04 came out. Really good release and zentyal desktop worked perfectly. Since 10.04 came out we did a little uprade which caused a lot of problems. The syncing part of the desktop doesn't really work as it should.
Let's say i made a new file or folder on my desktop, i log off, pc starts syncing and pc logs me off. When i go back to the office and sit down at another computer and try to login, it doesn't sync my files, i get a clean new desktop. Why doesn't it sync, does anyone know what happends here?
And there a couple of other things that are really weird, i will not bore everyone today with these matters, for now the syncing part is important to me. BTW if i log on the same computer i saved the files/folders on, it does display them but not on another computer.
Thanx in advance.
Pages: [1]