Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ATT1

Pages: [1] 2 3 ... 7
1
Same problem here.

2
I have the same question but I don't have installed "wbinfo" in old Zentyal 4.1
"apt-cache search wbinfo" does not find anything.
Where to find wbinfo, now ?

3
Hello,
In Zentyal I have an option to give ALL samba users the option to SSH to the server and get a shell login.
But I don't want to give all users this option, but only some users, and restrict other users.
How do I do this ?

4
Oh. My. God.
I think adding all users again, including all their groups and all their "fetch external email" is easier.....  :-(

5
Hello,
I have the need to freshly install a new Zentyal 6 on some machine and then to add all the existing users from an existing old Zentyal 4.1 installation, which exists on the old machine.
Somehow I would not want to manually add all users again.
Is there a script or something like that, which will add all users, including all their previous passwords and groups, to a new Zentyal 6 installation from an existing Zentyal 4.1 installation ?

6
Hello,
I need more interfaces for my samba configuration file "smb.conf", like so:

Code: [Select]
interfaces=lo,eth0,tun0
bind_interfaces_only=NO

However, when I edit this in /etc/samba/smb.conf, my changes are lost when the next reboot happens.
What to do to make my changes more permanent ?



7
I just found it myself.

In /etc/samba/smb.conf you need the option :

bind interfaces only=no   !!!!

Then it works.

So you first do "service samba-ad-dc stop" , edit the file, start the service again, and presto it worked..........


8
I can 100% confirm the same bug on Zentyal-6, latest development version : The firewall does not forward some ports to the VPN-IP (10.9.0.1 for example).
NMAP shows different results for "localhost" and for "VPN-IP".
These ports are filtered when using the VPN-IP:
88, 135, 139, 389, 445, 464, 636, 953.... WHY ????   :-[ :-[ :-[ :-[

I want to get \\vpn-server\shares to work for any windows client having any VPN-IP !!   :'( :'( :'(

Edit: Addendum: Even when I totally switched off the firewall, the strange behaviour remained that some ports are not open when nmap'-checking the VPN-IP (10.9.0.101) of the Zentyal server. An Nmap-check of the local eth0-ip adress of the Zentyal server (192.168.0.100) reveals that all necessary ports are open...............
I have read all sort of VPN- and samba docs/forums/hints but I am still not getting this issue fixed.  Any help greatly appreciated.



9
Hello,
I installed a Zentyal 4.1 long time ago and it still works and no I _don't_ want to upgrade under any circumstances; however I have to fix a tiny problem.
When being in the internal 192.168.x.x network I can reach the Zentyal shares fine using \\server01\shares on Windows-7 clients.
HOWEVER, the same machine has a 10.8.0.100 VPN-ip-adress, and trying to reach that from a VPN-connected Windows-Client won't work.

I assume it is the firewall, because:

Starting Nmap 6.40 ( http://nmap.org ) at 2019-01-28 15:25 CET
Nmap scan report for localhost (127.0.0.1)
Host is up (0.0000040s latency).
Other addresses for localhost (not scanned): 127.0.0.1
rDNS record for 127.0.0.1: localhost.localdomain
Not shown: 975 closed ports
PORT      STATE SERVICE
22/tcp    open  ssh
25/tcp    open  smtp
53/tcp    open  domain
80/tcp    open  http
88/tcp    open  kerberos-sec
110/tcp   open  pop3
135/tcp   open  msrpc
139/tcp   open  netbios-ssn
143/tcp   open  imap
389/tcp   open  ldap
443/tcp   open  https
445/tcp   open  microsoft-ds
464/tcp   open  kpasswd5
465/tcp   open  smtps
587/tcp   open  submission
636/tcp   open  ldapssl
993/tcp   open  imaps
995/tcp   open  pop3s
1024/tcp  open  kdm
3268/tcp  open  globalcatLDAP
3269/tcp  open  globalcatLDAPssl
3306/tcp  open  mysql
5000/tcp  open  upnp
8443/tcp  open  https-alt
20000/tcp open  dnp

Nmap done: 1 IP address (1 host up) scanned in 1.68 seconds
root@srv01:~# nmap 10.9.0.101

Starting Nmap 6.40 ( http://nmap.org ) at 2019-01-28 15:26 CET
Nmap scan report for 10.9.0.101
Host is up (0.000023s latency).
Not shown: 987 closed ports
PORT      STATE SERVICE
22/tcp    open  ssh
25/tcp    open  smtp
53/tcp    open  domain
80/tcp    open  http
110/tcp   open  pop3
143/tcp   open  imap
443/tcp   open  https
465/tcp   open  smtps
587/tcp   open  submission
993/tcp   open  imaps
995/tcp   open  pop3s
8443/tcp  open  https-alt
20000/tcp open  dnp

Nmap done: 1 IP address (1 host up) scanned in 2.48 seconds

So you can see that the firewall won't allow (?) port 135 and port 139 on the VPN-IP.

How can I fix that? Any advice appreciated.


10
Hello,
I just want to know if Zentyal 6 has the option "fetch external mail" for each user. Is this still there?

If you can answer me, you save my time of making a test-installation. :D

11
Email and Groupware / Re: External Mail
« on: November 17, 2017, 10:06:16 am »
We have the same situation:  Every user is "username@company.com" but the local Zentyal user is "username@company.lan".
Every user account fetches external mail from "username@company.com".
We use the following Thunderbird mail client settings to work properly:
For fetching mail: Mail is fetched from zentyal-server.company.lan  with user "username@company.lan" and local lan password for user.
For sending mail: Mail is SENT by mail.company.COM (dot com!!) with user "username@company.COM" (dot com!! not lan!) and remote password (different password!!!)
I hope that helps. It works for us, for years now.

12
Hello,
I am running Zentyal 4.1 and 4.2, 64bit, and I wonder if a little tricky configuration is possible.
So far, I have installed Zentyal. But now the requirement arose that the Zentyal server is reachable via VPN.
So I admit I did a very ugly VPN-hack, I added a boot-script that automatically connects to an outside VPN-server on starting.
Thus, the Zentyal gets a 10.9.0.101 IP (static) and thus is reachable via client-to-client communication for all VPN-users in the 10.9.0.x area.
That is fine for Mail, Webserver, etc.etc. but not-so-fine for Samba: Trying to reach the shares via \\10.9.0.101\shares results in waiting a while, then a network error "0x80004005".
I checked the /etc/samba/smb.conf and I added tun0 to the interfaces:
 interfaces = lo,eth0,eth1,tun0

However, it still won't let me connect from a Windows client to the Samba share at \\10.9.0.101\shares

Any help is greatly appreciated.

13
So, what to do to get it working to Zentyal 4.2 ? Any suggestions ? I have no idea.....

14
However, uname -a shows:
oot@zentyal:~# uname -a
Linux zentyal 3.16.0-51-generic #69~14.04.1-Ubuntu SMP Wed Oct 7 15:32:41 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

root@zentyal:~# df -h
Filesystem                    Size  Used Avail Use% Mounted on
udev                          859M  4,0K  859M   1% /dev
tmpfs                         175M  748K  175M   1% /run
/dev/mapper/zentyal--vg-root   63G  2,7G   57G   5% /
none                          4,0K     0  4,0K   0% /sys/fs/cgroup
none                           50M     0   50M   0% /run/lock
none                          875M     0  875M   0% /run/shm
none                          100M  4,0K  100M   1% /run/user
/dev/sda1                     236M  135M   89M  61% /boot
/dev/mapper/crypt             4,8G  2,5G  2,1G  56% /mnt/extracrypt

I manually had to "route add default gw 192.168.0.1" and "echo "nameserver 8.8.8.8 > /etc/rc.local" " to even use the net!

15
Hi,
I have an old 4.1.5 Zentyal test distro that worked, but I did not use it for a while, so I switched it on today again after a long time and I thought it would be a good idea to upgrade.
So I upgraded core components to 4.1.9. That worked.
Then the button appeared "upgrade to 4.2" . I pressed it....
I didn't look what was happening because I was busy.... but the machine shut down........
I manually switched it on again..... it asked for my 2 cryptsetup passwords. But the web interface now says "error" :


title

    Aktionen
    Zeige technische Details
    Gehen Sie zurück

Leider ist ein unerwarteter Fehler aufgetreten
Es gibt einige Softwarepakete, die nicht korrekt installiert wurden: linux-image-3.16.0-77-generic.

Sie sollten es erneut installieren und versuchen sie ihren Vorgang nochmal.

    Zeige technische Details

Error trace

Can't call method "ldap" on an undefined value at /usr/share/perl5/EBox/MailVDomainsLdap.pm line 43.
   ...propagated at /usr/share/perl5/EBox/CGI/Base.pm line 321.
 at /usr/share/perl5/EBox/CGI/Run.pm line 105

    in EBox::CGI::Run::run at /usr/share/perl5/EBox/CGI/Run.pm line 105

      102:         if (Scalar::Util::blessed($ex) and $ex->isa('EBox::Exceptions::Base')) {
      103:             $ex->throw();
      104:         } else {
      105:             die $ex;
      106:         }
      107:     }
      108: }

    Show function arguments
    in main::__ANON__ at /usr/share/zentyal/psgi/zentyal.psgi line 46

       43:     local $SIG{__WARN__} = sub { EBox::warn($_[0]) };
       44:
       45:     my $req = Plack::Request->new($env);
       46:     return EBox::CGI::Run->run($req);
       47: };
       48:
       49: my $builder = new Plack::Builder();

    Show function arguments
    in Plack::App::URLMap::call at /usr/share/perl5/Plack/App/URLMap.pm line 71

       68:         return $self->response_cb($app->($env), sub {
       69:             $env->{PATH_INFO} = $orig_path_info;
       70:             $env->{SCRIPT_NAME} = $orig_script_name;
       71:         });
       72:     }
       73:
       74:     DEBUG && warn "All matching failed.\n";

    Show function arguments
    in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50

       47: sub to_app {
       48:     my $self = shift;
       49:     $self->prepare_app;
       50:     return sub { $self->call(@_) };
       51: }
       52:
       53:

    Show function arguments
    in EBox::Middleware::Auth::call at /usr/share/perl5/EBox/Middleware/Auth.pm line 366

      363:         $self->_logout($env);
      364:     } elsif ($self->_validateSession($env)) {
      365:         delete $env->{'psgix.session'}{AuthReason};
      366:         return $self->app->($env);
      367:     } else {
      368:         # Require authentication, redirect to the login form.
      369:         return $self->_redirectToLogin($env);

    Show function arguments
    in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50

       47: sub to_app {
       48:     my $self = shift;
       49:     $self->prepare_app;
       50:     return sub { $self->call(@_) };
       51: }
       52:
       53:

    Show function arguments
    in Plack::Middleware::Conditional::call at /usr/share/perl5/Plack/Middleware/Conditional.pm line 16

       13:     my($self, $env) = @_;
       14:
       15:     my $app = $self->condition->($env) ? $self->middleware : $self->app;
       16:     return $app->($env);
       17: }
       18:
       19: 1;

    Show function arguments
    in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50

       47: sub to_app {
       48:     my $self = shift;
       49:     $self->prepare_app;
       50:     return sub { $self->call(@_) };
       51: }
       52:
       53:

    Show function arguments
    in EBox::WebAdmin::Middleware::SubAppAuth::call at /usr/share/perl5/EBox/WebAdmin/Middleware/SubAppAuth.pm line 57

       54:             }
       55:         }
       56:     }
       57:     return $self->app->($env);
       58: }
       59:
       60: 1;

    Show function arguments
    in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50

       47: sub to_app {
       48:     my $self = shift;
       49:     $self->prepare_app;
       50:     return sub { $self->call(@_) };
       51: }
       52:
       53:

    Show function arguments
    in Plack::Middleware::Session::call at /usr/share/perl5/Plack/Middleware/Session.pm line 52

       49:
       50:     $env->{'psgix.session.options'} = { id => $id };
       51:
       52:     my $res = $self->app->($env);
       53:     $self->response_cb($res, sub { $self->finalize($env, $_[0]) });
       54: }
       55:

    Show function arguments
    in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50

       47: sub to_app {
       48:     my $self = shift;
       49:     $self->prepare_app;
       50:     return sub { $self->call(@_) };
       51: }
       52:
       53:

    Show function arguments
    in Plack::Middleware::ReverseProxy::call at /usr/share/perl5/Plack/Middleware/ReverseProxy.pm line 68

       65:         }
       66:     }
       67:
       68:     $self->app->($env);
       69: }
       70:
       71: 1;

    Show function arguments
    in EBox::Middleware::UnhandledError::call at /usr/share/perl5/Plack/Component.pm line 50

       47: sub to_app {
       48:     my $self = shift;
       49:     $self->prepare_app;
       50:     return sub { $self->call(@_) };
       51: }
       52:
       53:

    Show function arguments
    in Plack::Component::__ANON__ at /usr/share/perl5/Plack/Component.pm line 50

       47: sub to_app {
       48:     my $self = shift;
       49:     $self->prepare_app;
       50:     return sub { $self->call(@_) };
       51: }
       52:
       53:

    Show function arguments
    in (eval) at /usr/share/zentyal/psgi/zentyal.psgi line 0

        1: # Copyright (C) 2010-2014 Zentyal S.L.
        2: #
        3: # This program is free software; you can redistribute it and/or modify

    at /usr/share/zentyal/psgi/zentyal.psgi line 0

        1: # Copyright (C) 2010-2014 Zentyal S.L.
        2: #
        3: # This program is free software; you can redistribute it and/or modify

Gehen Sie zurück

Pages: [1] 2 3 ... 7