Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: 1 [2]
16
German / Re: Radius startet nicht: "Error restarting service RADIUS."
« on: July 28, 2014, 04:11:13 pm »
So netstat says that freeradius is running on that port...
root@***:~# netstat -patun | grep 1812
udp 0 0 0.0.0.0:1812 0.0.0.0:* 937/freeradius
root@***:~# netstat -patun | grep 1812
udp 0 0 0.0.0.0:1812 0.0.0.0:* 937/freeradius
17
German / Re: Radius startet nicht: "Error restarting service RADIUS."
« on: July 28, 2014, 03:20:23 pm »
Hi,
sudo top
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
937 freerad 20 0 176196 7284 3440 S 0,0 0,1 0:00.13 freeradius
ps -A
root@***:~# ps -A
PID TTY TIME CMD
1 ? 00:00:19 init
2 ? 00:00:00 kthreadd
3 ? 00:00:00 ksoftirqd/0
5 ? 00:00:00 kworker/0:0H
7 ? 00:00:14 rcu_sched
8 ? 00:00:16 rcuos/0
9 ? 00:00:07 rcuos/1
10 ? 00:00:06 rcuos/2
11 ? 00:00:06 rcuos/3
12 ? 00:00:00 rcu_bh
13 ? 00:00:00 rcuob/0
14 ? 00:00:00 rcuob/1
15 ? 00:00:00 rcuob/2
16 ? 00:00:00 rcuob/3
17 ? 00:00:00 migration/0
18 ? 00:00:00 watchdog/0
19 ? 00:00:00 watchdog/1
20 ? 00:00:00 migration/1
21 ? 00:00:00 ksoftirqd/1
22 ? 00:00:05 kworker/1:0
23 ? 00:00:00 kworker/1:0H
24 ? 00:00:00 watchdog/2
25 ? 00:00:00 migration/2
26 ? 00:00:00 ksoftirqd/2
27 ? 00:00:00 kworker/2:0
28 ? 00:00:00 kworker/2:0H
29 ? 00:00:00 watchdog/3
30 ? 00:00:00 migration/3
31 ? 00:00:00 ksoftirqd/3
33 ? 00:00:00 kworker/3:0H
34 ? 00:00:00 khelper
35 ? 00:00:00 kdevtmpfs
36 ? 00:00:00 netns
37 ? 00:00:00 writeback
38 ? 00:00:00 kintegrityd
39 ? 00:00:00 bioset
40 ? 00:00:00 kworker/u9:0
41 ? 00:00:00 kblockd
42 ? 00:00:00 ata_sff
43 ? 00:00:00 khubd
44 ? 00:00:00 md
45 ? 00:00:00 devfreq_wq
46 ? 00:00:16 kworker/0:1
48 ? 00:00:00 khungtaskd
49 ? 00:00:00 kswapd0
50 ? 00:00:00 ksmd
51 ? 00:00:00 khugepaged
52 ? 00:00:00 fsnotify_mark
53 ? 00:00:00 ecryptfs-kthrea
54 ? 00:00:00 crypto
66 ? 00:00:00 kthrotld
86 ? 00:00:00 deferwq
87 ? 00:00:00 charger_manager
99 ? 00:00:02 kworker/3:1
139 ? 00:00:02 kworker/2:1
140 ? 00:00:00 kpsmoused
141 ? 00:00:00 kworker/1:1
142 ? 00:00:00 kworker/0:2
143 ? 00:00:00 scsi_eh_0
144 ? 00:00:00 scsi_eh_1
145 ? 00:00:00 scsi_eh_2
146 ? 00:00:00 scsi_eh_3
147 ? 00:00:00 scsi_eh_4
148 ? 00:00:00 scsi_eh_5
167 ? 00:00:02 jbd2/sda1-8
168 ? 00:00:00 ext4-rsv-conver
324 ? 00:00:00 kworker/u9:1
371 ? 00:00:00 upstart-udev-br
399 ? 00:00:00 upstart-file-br
405 ? 00:00:00 systemd-udevd
427 ? 00:00:09 rsyslogd
432 ? 00:00:00 dbus-daemon
457 ? 00:00:00 systemd-logind
473 ? 00:00:00 irq/44-mei_me
475 ? 00:00:00 hd-audio0
486 ? 00:00:00 hd-audio1
623 ? 00:00:00 upstart-socket-
686 ? 00:00:00 ttm_swap
891 tty4 00:00:00 getty
893 tty5 00:00:00 getty
901 tty2 00:00:00 getty
902 tty3 00:00:00 getty
905 tty6 00:00:00 getty
925 ? 00:00:00 acpid
930 ? 00:00:00 sh
935 ? 00:00:00 sshd
937 ? 00:00:00 freeradius
1051 ? 00:00:00 lxdm-binary
1069 ? 00:00:00 cron
1103 tty7 00:00:44 Xorg
1111 ? 00:00:03 mysqld
1122 ? 00:00:46 freshclam
1143 ? 00:00:17 redis-server
1180 ? 00:00:00 kauditd
1201 ? 00:00:00 sudo
1204 ? 00:00:23 redis-server
1327 ? 00:05:26 lxdm-greeter-gt
1805 ? 00:00:00 dhcpd
1928 ? 00:01:10 named
2000 ? 00:02:40 perl
2042 ? 00:00:02 haproxy
2058 ? 00:00:02 perl
2189 ? 00:01:13 collectd
2267 ? 00:00:02 ntpd
2364 ? 00:00:00 samba
2366 ? 00:00:00 samba
2367 ? 00:00:00 samba
2368 ? 00:00:02 smbd
2369 ? 00:00:01 samba
2370 ? 00:00:00 samba
2371 ? 00:00:09 samba
2372 ? 00:00:00 samba
2373 ? 00:00:01 samba
2374 ? 00:00:28 samba
2375 ? 00:00:00 samba
2376 ? 00:00:00 samba
2377 ? 00:00:10 samba
2378 ? 00:00:01 samba
2396 ? 00:00:02 sssd
2416 ? 00:00:05 sssd_be
2417 ? 00:00:22 sssd_nss
2418 ? 00:00:00 sssd_pam
2546 ? 00:01:02 squid3
2569 ? 00:01:13 squid3
2585 ? 00:00:00 unlinkd
2737 ? 00:00:00 nginx
2739 ? 00:00:03 nginx
2740 ? 00:00:01 nginx
2741 ? 00:00:03 nginx
2742 ? 00:00:03 nginx
2869 tty1 00:00:00 getty
3315 ? 00:01:19 uwsgi
5161 ? 00:00:00 kworker/u8:1
15762 ? 00:00:00 basic_ldap_auth
15800 ? 00:00:02 loggerd
23635 ? 00:00:00 sshd
23706 ? 00:00:00 kworker/3:2
23748 ? 00:00:00 sshd
23749 pts/4 00:00:00 bash
23751 ? 00:00:00 console-kit-dae
23816 ? 00:00:00 polkitd
23832 pts/4 00:00:00 sudo
23833 pts/4 00:00:00 bash
24388 ? 00:00:00 kworker/u8:0
26445 pts/4 00:00:00 ps
sudo top
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
937 freerad 20 0 176196 7284 3440 S 0,0 0,1 0:00.13 freeradius
ps -A
root@***:~# ps -A
PID TTY TIME CMD
1 ? 00:00:19 init
2 ? 00:00:00 kthreadd
3 ? 00:00:00 ksoftirqd/0
5 ? 00:00:00 kworker/0:0H
7 ? 00:00:14 rcu_sched
8 ? 00:00:16 rcuos/0
9 ? 00:00:07 rcuos/1
10 ? 00:00:06 rcuos/2
11 ? 00:00:06 rcuos/3
12 ? 00:00:00 rcu_bh
13 ? 00:00:00 rcuob/0
14 ? 00:00:00 rcuob/1
15 ? 00:00:00 rcuob/2
16 ? 00:00:00 rcuob/3
17 ? 00:00:00 migration/0
18 ? 00:00:00 watchdog/0
19 ? 00:00:00 watchdog/1
20 ? 00:00:00 migration/1
21 ? 00:00:00 ksoftirqd/1
22 ? 00:00:05 kworker/1:0
23 ? 00:00:00 kworker/1:0H
24 ? 00:00:00 watchdog/2
25 ? 00:00:00 migration/2
26 ? 00:00:00 ksoftirqd/2
27 ? 00:00:00 kworker/2:0
28 ? 00:00:00 kworker/2:0H
29 ? 00:00:00 watchdog/3
30 ? 00:00:00 migration/3
31 ? 00:00:00 ksoftirqd/3
33 ? 00:00:00 kworker/3:0H
34 ? 00:00:00 khelper
35 ? 00:00:00 kdevtmpfs
36 ? 00:00:00 netns
37 ? 00:00:00 writeback
38 ? 00:00:00 kintegrityd
39 ? 00:00:00 bioset
40 ? 00:00:00 kworker/u9:0
41 ? 00:00:00 kblockd
42 ? 00:00:00 ata_sff
43 ? 00:00:00 khubd
44 ? 00:00:00 md
45 ? 00:00:00 devfreq_wq
46 ? 00:00:16 kworker/0:1
48 ? 00:00:00 khungtaskd
49 ? 00:00:00 kswapd0
50 ? 00:00:00 ksmd
51 ? 00:00:00 khugepaged
52 ? 00:00:00 fsnotify_mark
53 ? 00:00:00 ecryptfs-kthrea
54 ? 00:00:00 crypto
66 ? 00:00:00 kthrotld
86 ? 00:00:00 deferwq
87 ? 00:00:00 charger_manager
99 ? 00:00:02 kworker/3:1
139 ? 00:00:02 kworker/2:1
140 ? 00:00:00 kpsmoused
141 ? 00:00:00 kworker/1:1
142 ? 00:00:00 kworker/0:2
143 ? 00:00:00 scsi_eh_0
144 ? 00:00:00 scsi_eh_1
145 ? 00:00:00 scsi_eh_2
146 ? 00:00:00 scsi_eh_3
147 ? 00:00:00 scsi_eh_4
148 ? 00:00:00 scsi_eh_5
167 ? 00:00:02 jbd2/sda1-8
168 ? 00:00:00 ext4-rsv-conver
324 ? 00:00:00 kworker/u9:1
371 ? 00:00:00 upstart-udev-br
399 ? 00:00:00 upstart-file-br
405 ? 00:00:00 systemd-udevd
427 ? 00:00:09 rsyslogd
432 ? 00:00:00 dbus-daemon
457 ? 00:00:00 systemd-logind
473 ? 00:00:00 irq/44-mei_me
475 ? 00:00:00 hd-audio0
486 ? 00:00:00 hd-audio1
623 ? 00:00:00 upstart-socket-
686 ? 00:00:00 ttm_swap
891 tty4 00:00:00 getty
893 tty5 00:00:00 getty
901 tty2 00:00:00 getty
902 tty3 00:00:00 getty
905 tty6 00:00:00 getty
925 ? 00:00:00 acpid
930 ? 00:00:00 sh
935 ? 00:00:00 sshd
937 ? 00:00:00 freeradius
1051 ? 00:00:00 lxdm-binary
1069 ? 00:00:00 cron
1103 tty7 00:00:44 Xorg
1111 ? 00:00:03 mysqld
1122 ? 00:00:46 freshclam
1143 ? 00:00:17 redis-server
1180 ? 00:00:00 kauditd
1201 ? 00:00:00 sudo
1204 ? 00:00:23 redis-server
1327 ? 00:05:26 lxdm-greeter-gt
1805 ? 00:00:00 dhcpd
1928 ? 00:01:10 named
2000 ? 00:02:40 perl
2042 ? 00:00:02 haproxy
2058 ? 00:00:02 perl
2189 ? 00:01:13 collectd
2267 ? 00:00:02 ntpd
2364 ? 00:00:00 samba
2366 ? 00:00:00 samba
2367 ? 00:00:00 samba
2368 ? 00:00:02 smbd
2369 ? 00:00:01 samba
2370 ? 00:00:00 samba
2371 ? 00:00:09 samba
2372 ? 00:00:00 samba
2373 ? 00:00:01 samba
2374 ? 00:00:28 samba
2375 ? 00:00:00 samba
2376 ? 00:00:00 samba
2377 ? 00:00:10 samba
2378 ? 00:00:01 samba
2396 ? 00:00:02 sssd
2416 ? 00:00:05 sssd_be
2417 ? 00:00:22 sssd_nss
2418 ? 00:00:00 sssd_pam
2546 ? 00:01:02 squid3
2569 ? 00:01:13 squid3
2585 ? 00:00:00 unlinkd
2737 ? 00:00:00 nginx
2739 ? 00:00:03 nginx
2740 ? 00:00:01 nginx
2741 ? 00:00:03 nginx
2742 ? 00:00:03 nginx
2869 tty1 00:00:00 getty
3315 ? 00:01:19 uwsgi
5161 ? 00:00:00 kworker/u8:1
15762 ? 00:00:00 basic_ldap_auth
15800 ? 00:00:02 loggerd
23635 ? 00:00:00 sshd
23706 ? 00:00:00 kworker/3:2
23748 ? 00:00:00 sshd
23749 pts/4 00:00:00 bash
23751 ? 00:00:00 console-kit-dae
23816 ? 00:00:00 polkitd
23832 pts/4 00:00:00 sudo
23833 pts/4 00:00:00 bash
24388 ? 00:00:00 kworker/u8:0
26445 pts/4 00:00:00 ps
18
German / Re: Radius startet nicht: "Error restarting service RADIUS."
« on: July 28, 2014, 11:28:29 am »
Nach einem manuellen Restart bekomme ich nun folgende Meldung:
root@***:~# /etc/init.d/freeradius restart
* Stopping FreeRADIUS daemon freeradius * /var/run/freeradius/freeradius.pid not found... [ OK ]
* Starting FreeRADIUS daemon freeradius [ OK ]
root@***:~# cat /var/log/freeradius/radius.log
Sun Jul 27 15:39:00 2014 : Info: Loaded virtual server <default>
Sun Jul 27 15:39:00 2014 : Info: Loaded virtual server inner-tunnel
Sun Jul 27 15:39:00 2014 : Info: ... adding new socket proxy address * port 42833
Sun Jul 27 15:39:00 2014 : Info: Ready to process requests.
Mon Jul 28 11:23:04 2014 : Info: Loaded virtual server <default>
Mon Jul 28 11:23:04 2014 : Info: Loaded virtual server inner-tunnel
Mon Jul 28 11:23:04 2014 : Error: Failed binding to authentication address * port 1812: Address already in use
Mon Jul 28 11:23:04 2014 : Error: /etc/freeradius/radiusd.conf[240]: Error binding to port for 0.0.0.0 port 1812
Könnt ihr damit etwas anfangen? :/
root@***:~# /etc/init.d/freeradius restart
* Stopping FreeRADIUS daemon freeradius * /var/run/freeradius/freeradius.pid not found... [ OK ]
* Starting FreeRADIUS daemon freeradius [ OK ]
root@***:~# cat /var/log/freeradius/radius.log
Sun Jul 27 15:39:00 2014 : Info: Loaded virtual server <default>
Sun Jul 27 15:39:00 2014 : Info: Loaded virtual server inner-tunnel
Sun Jul 27 15:39:00 2014 : Info: ... adding new socket proxy address * port 42833
Sun Jul 27 15:39:00 2014 : Info: Ready to process requests.
Mon Jul 28 11:23:04 2014 : Info: Loaded virtual server <default>
Mon Jul 28 11:23:04 2014 : Info: Loaded virtual server inner-tunnel
Mon Jul 28 11:23:04 2014 : Error: Failed binding to authentication address * port 1812: Address already in use
Mon Jul 28 11:23:04 2014 : Error: /etc/freeradius/radiusd.conf[240]: Error binding to port for 0.0.0.0 port 1812
Könnt ihr damit etwas anfangen? :/
19
German / Re: Radius startet nicht: "Error restarting service RADIUS."
« on: July 28, 2014, 10:59:37 am »
Danke für den Hinweis. Im Radius-Log steht folgendes:
root@***:~# cat /var/log/freeradius/radius.log
Sun Jul 27 15:39:00 2014 : Info: Loaded virtual server <default>
Sun Jul 27 15:39:00 2014 : Info: Loaded virtual server inner-tunnel
Sun Jul 27 15:39:00 2014 : Info: ... adding new socket proxy address * port 42833
Sun Jul 27 15:39:00 2014 : Info: Ready to process requests.
Ich verstehe es einfach nicht
root@***:~# cat /var/log/freeradius/radius.log
Sun Jul 27 15:39:00 2014 : Info: Loaded virtual server <default>
Sun Jul 27 15:39:00 2014 : Info: Loaded virtual server inner-tunnel
Sun Jul 27 15:39:00 2014 : Info: ... adding new socket proxy address * port 42833
Sun Jul 27 15:39:00 2014 : Info: Ready to process requests.
Ich verstehe es einfach nicht
20
German / [SOLVED] Radius startet nicht: "Error restarting service RADIUS."
« on: July 23, 2014, 08:45:36 pm »
Liebe Community,
ich bin neu hier und habe gerade einen frischen Zentyal-Server (3.5) aufgesetzt. Bis jetzt läuft alles super, bis auf das Radius-Modul.
Auf der Startseite unter Status der Module steht: "RADIUS Gestoppt". Sobald ich auf neustarten klicke, bekomme ich die Meldung: "Error restarting service RADIUS. See /var/log/zentyal/zentyal.log for more information."
Hier das Log-File:
---
2014/07/23 20:34:04 INFO> Service.pm:997 EBox::Module::Service::restartService - Restarting service for module: radius
2014/07/23 20:34:04 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/RKOo45JVms '/etc/freeradius/radiusd.conf'
/bin/chmod 640 '/etc/freeradius/radiusd.conf'
/bin/chown root.freerad '/etc/freeradius/radiusd.conf'
2014/07/23 20:34:04 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/ApjsXW5fb_ '/etc/freeradius/sites-available/default'
/bin/chmod 640 '/etc/freeradius/sites-available/default'
/bin/chown root.freerad '/etc/freeradius/sites-available/default'
2014/07/23 20:34:04 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/XKLW_moJ2b '/etc/freeradius/sites-available/inner-tunnel'
/bin/chmod 640 '/etc/freeradius/sites-available/inner-tunnel'
/bin/chown root.freerad '/etc/freeradius/sites-available/inner-tunnel'
2014/07/23 20:34:05 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/4RRKkDggtS '/etc/freeradius/users'
/bin/chmod 640 '/etc/freeradius/users'
/bin/chown root.freerad '/etc/freeradius/users'
2014/07/23 20:34:05 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/LEDP1YCdR6 '/etc/freeradius/eap.conf'
/bin/chmod 640 '/etc/freeradius/eap.conf'
/bin/chown root.freerad '/etc/freeradius/eap.conf'
2014/07/23 20:34:05 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/4ebaHBW74I '/etc/freeradius/modules/ldap'
/bin/chmod 640 '/etc/freeradius/modules/ldap'
/bin/chown root.freerad '/etc/freeradius/modules/ldap'
2014/07/23 20:34:05 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/NczTG86_L7 '/etc/freeradius/clients.conf'
/bin/chmod 640 '/etc/freeradius/clients.conf'
/bin/chown root.freerad '/etc/freeradius/clients.conf'
2014/07/23 20:34:05 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - cat /var/run/freeradius/freeradius.pid
2014/07/23 20:34:05 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - service freeradius start
2014/07/23 20:34:05 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command service freeradius start failed.
2014/07/23 20:34:05 ERROR> Service.pm:1001 EBox::Module::Service::restartService - Error restarting service: root command service freeradius start failed.
Error output: start: Job is already running: freeradius
Command output: .
Exit value: 1
2014/07/23 20:34:05 ERROR> Service.pm:1003 EBox::Module::Service::restartService - root command service freeradius start failed.
2014/07/23 20:34:05 ERROR> RestartService.pm:61 EBox::SysInfo::CGI::RestartService::_process - Restart of RADIUS from dashboard failed: root command service freeradius start failed.
Error output: start: Job is already running: freeradius
---
Habt ihr da vielleicht eine Idee, was das sein kann?? Ich habe Zentyal nun schon zum dritten Mal neu aufgesetzt, habe aber immer wieder das gleiche Problem. Was mache ich falsch?
Viele Grüße,
Darius
ich bin neu hier und habe gerade einen frischen Zentyal-Server (3.5) aufgesetzt. Bis jetzt läuft alles super, bis auf das Radius-Modul.
Auf der Startseite unter Status der Module steht: "RADIUS Gestoppt". Sobald ich auf neustarten klicke, bekomme ich die Meldung: "Error restarting service RADIUS. See /var/log/zentyal/zentyal.log for more information."
Hier das Log-File:
---
2014/07/23 20:34:04 INFO> Service.pm:997 EBox::Module::Service::restartService - Restarting service for module: radius
2014/07/23 20:34:04 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/RKOo45JVms '/etc/freeradius/radiusd.conf'
/bin/chmod 640 '/etc/freeradius/radiusd.conf'
/bin/chown root.freerad '/etc/freeradius/radiusd.conf'
2014/07/23 20:34:04 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/ApjsXW5fb_ '/etc/freeradius/sites-available/default'
/bin/chmod 640 '/etc/freeradius/sites-available/default'
/bin/chown root.freerad '/etc/freeradius/sites-available/default'
2014/07/23 20:34:04 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/XKLW_moJ2b '/etc/freeradius/sites-available/inner-tunnel'
/bin/chmod 640 '/etc/freeradius/sites-available/inner-tunnel'
/bin/chown root.freerad '/etc/freeradius/sites-available/inner-tunnel'
2014/07/23 20:34:05 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/4RRKkDggtS '/etc/freeradius/users'
/bin/chmod 640 '/etc/freeradius/users'
/bin/chown root.freerad '/etc/freeradius/users'
2014/07/23 20:34:05 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/LEDP1YCdR6 '/etc/freeradius/eap.conf'
/bin/chmod 640 '/etc/freeradius/eap.conf'
/bin/chown root.freerad '/etc/freeradius/eap.conf'
2014/07/23 20:34:05 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/4ebaHBW74I '/etc/freeradius/modules/ldap'
/bin/chmod 640 '/etc/freeradius/modules/ldap'
/bin/chown root.freerad '/etc/freeradius/modules/ldap'
2014/07/23 20:34:05 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - set -e
/bin/mv /var/lib/zentyal/tmp/NczTG86_L7 '/etc/freeradius/clients.conf'
/bin/chmod 640 '/etc/freeradius/clients.conf'
/bin/chown root.freerad '/etc/freeradius/clients.conf'
2014/07/23 20:34:05 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - cat /var/run/freeradius/freeradius.pid
2014/07/23 20:34:05 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 19554) - service freeradius start
2014/07/23 20:34:05 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command service freeradius start failed.
2014/07/23 20:34:05 ERROR> Service.pm:1001 EBox::Module::Service::restartService - Error restarting service: root command service freeradius start failed.
Error output: start: Job is already running: freeradius
Command output: .
Exit value: 1
2014/07/23 20:34:05 ERROR> Service.pm:1003 EBox::Module::Service::restartService - root command service freeradius start failed.
2014/07/23 20:34:05 ERROR> RestartService.pm:61 EBox::SysInfo::CGI::RestartService::_process - Restart of RADIUS from dashboard failed: root command service freeradius start failed.
Error output: start: Job is already running: freeradius
---
Habt ihr da vielleicht eine Idee, was das sein kann?? Ich habe Zentyal nun schon zum dritten Mal neu aufgesetzt, habe aber immer wieder das gleiche Problem. Was mache ich falsch?
Viele Grüße,
Darius
Pages: 1 [2]