Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: 1 [2]
16
Installation and Upgrades / [SOLVED] Version 2.1-1
« on: July 25, 2011, 07:09:47 pm »
Hi guys... I have installed this version and it appears that it has no updates.. What is happening?
Edit: I had to change my sources.list and download a gpg key. It went well when i upgraded it, but now i can't enable my mail module due an error on Users and Groups module.
Edit: I had to change my sources.list and download a gpg key. It went well when i upgraded it, but now i can't enable my mail module due an error on Users and Groups module.
17
Installation and Upgrades / Slow Internet
« on: July 25, 2011, 03:01:55 pm »
Hi guys,
Well, i dunno why, but internet gets too slow with zentyal. Now i have a simple proxy running on a window$ pc and it's working really good. When i put my zentyal server to work, it gets slow.
Well, i dunno why, but internet gets too slow with zentyal. Now i have a simple proxy running on a window$ pc and it's working really good. When i put my zentyal server to work, it gets slow.
18
Portuguese / Lentidão ao compartilhar internet
« on: July 18, 2011, 08:05:26 pm »
Boa tarde, meus caros
Tenho um Core 2 Duo como servidor, com 2,5 gb de memória ram e 300 gb de HD.
Nele tenho o zentyal 2.0 instalado, com serviços de gateway (mas o dhcp não inicia de modo algum...tenho que criar um dhcpd.conf na mão e mandar iniciar via console), hospedagem de um portal e dns (bind). O bind funciona, mas quando tento registar o registro.br dá erro. É como se a porta do bind (53, se não me engano) estivesse fechada. E de uma semana pra cá, comecei a ter MUITOS problemas com lentidão na internet. Pensei que fosse minha operadora.. mas é um link dedicado de 1 mb, e ao trocar por uma maquina com window$ xp com um proxyzinho qualquer, funcionou muito rápido.
Minha estrutura é a seguinte:
Roteador do link dedicado > Gateway Zentyal > Servidor de banco de dados, Active Directory (windows server 2003 ) e rede
Tenho um Core 2 Duo como servidor, com 2,5 gb de memória ram e 300 gb de HD.
Nele tenho o zentyal 2.0 instalado, com serviços de gateway (mas o dhcp não inicia de modo algum...tenho que criar um dhcpd.conf na mão e mandar iniciar via console), hospedagem de um portal e dns (bind). O bind funciona, mas quando tento registar o registro.br dá erro. É como se a porta do bind (53, se não me engano) estivesse fechada. E de uma semana pra cá, comecei a ter MUITOS problemas com lentidão na internet. Pensei que fosse minha operadora.. mas é um link dedicado de 1 mb, e ao trocar por uma maquina com window$ xp com um proxyzinho qualquer, funcionou muito rápido.
Minha estrutura é a seguinte:
Roteador do link dedicado > Gateway Zentyal > Servidor de banco de dados, Active Directory (windows server 2003 ) e rede
19
Installation and Upgrades / Extremely slow Internet
« on: July 14, 2011, 06:10:31 pm »
Hi guys. I have a dedicated link, and it got too slow since 2 days ago.
It was working pretty well, but i dunno why it got so slow.
My server runs webservice (some few webpages), shares internet connection through squid, mail service (not yet running, but it will). It's located at 192.168.0.1. Also i have two other servers: one for mysql at 192.168.0.4 and other for Active Directory at 192.168.0.16, user shares and printer service.
Now i've made a simple server to substitute my zentyal server, with windows xp and a simple proxy and it's working well... so the problem is not on my ISP.
Edit: Oh, and i forgot to say that DHCP server doesn't start by itself. I have to make a new dhcpd.conf and start it manually.
It was working pretty well, but i dunno why it got so slow.
My server runs webservice (some few webpages), shares internet connection through squid, mail service (not yet running, but it will). It's located at 192.168.0.1. Also i have two other servers: one for mysql at 192.168.0.4 and other for Active Directory at 192.168.0.16, user shares and printer service.
Now i've made a simple server to substitute my zentyal server, with windows xp and a simple proxy and it's working well... so the problem is not on my ISP.
Edit: Oh, and i forgot to say that DHCP server doesn't start by itself. I have to make a new dhcpd.conf and start it manually.
20
Installation and Upgrades / Can't access from outside
« on: May 30, 2011, 03:45:21 pm »
Hey guys..
well, i can't access my zentyal gateway from outside. Well, i tryed to change that firewall rules, did "accept" to all incoming protocols i need (ssh, ftp) from any ip to any ip... and nothing happens. This is my second fresh install, and still no access.
well, i can't access my zentyal gateway from outside. Well, i tryed to change that firewall rules, did "accept" to all incoming protocols i need (ssh, ftp) from any ip to any ip... and nothing happens. This is my second fresh install, and still no access.
21
Installation and Upgrades / LDAP Error... Plz Help!
« on: May 13, 2011, 09:17:07 pm »
Hi guys,
Well, i had to re-install all my modules... so i did "sudo apt-get remove --purge ebox-*"
Then, "sudo apt-get install ebox-all"
but now, when i try to enable some modules, i get the error:
Failed to enable: root command /etc/init.d/slapd start failed. Error output: Command output: Starting OpenLDAP: slapd - failed. The operation failed but no output was produced. For hints on what went wrong please refer to the system's logfiles (e.g. /var/log/syslog) or try running the daemon in Debug mode like via "slapd -d 16383" (warning: this will create copious output). Below, you can find the command line options used by this script to run slapd. Do not forget to specify those options if you want to look to debugging output: slapd -h 'ldap:/// ldapi:/// ldaps:///' -g openldap -u openldap -F /etc/ldap/slapd.d/ . Exit value: 1
What can i do please?
Best regards
Well, i had to re-install all my modules... so i did "sudo apt-get remove --purge ebox-*"
Then, "sudo apt-get install ebox-all"
but now, when i try to enable some modules, i get the error:
Failed to enable: root command /etc/init.d/slapd start failed. Error output: Command output: Starting OpenLDAP: slapd - failed. The operation failed but no output was produced. For hints on what went wrong please refer to the system's logfiles (e.g. /var/log/syslog) or try running the daemon in Debug mode like via "slapd -d 16383" (warning: this will create copious output). Below, you can find the command line options used by this script to run slapd. Do not forget to specify those options if you want to look to debugging output: slapd -h 'ldap:/// ldapi:/// ldaps:///' -g openldap -u openldap -F /etc/ldap/slapd.d/ . Exit value: 1
What can i do please?
Best regards
22
Installation and Upgrades / Can't enable DHCP
« on: June 01, 2010, 09:16:29 pm »
Hi guys,
Well, i've changed my ethernet adapter, so it reconised the new one as "eth0_rename"
And so i can't start my DHCP server. Everything else is working well.
I've already tried to remove --purge ebox-dhcp, and install again, but no luck.
Does anyone know how can i fix it?
Well, i've changed my ethernet adapter, so it reconised the new one as "eth0_rename"
And so i can't start my DHCP server. Everything else is working well.
I've already tried to remove --purge ebox-dhcp, and install again, but no luck.
Does anyone know how can i fix it?
23
Installation and Upgrades / Slow Webserver
« on: May 26, 2010, 06:13:42 pm »
Hi guys,
I've installed Ebox 1.4, and it's running so smoothly. But sometimes, afeter some hours, web navigation begins to be slow. Does anyone knows what it could be?
I think that it may be a dns problem...
Thanks in advance.
I've installed Ebox 1.4, and it's running so smoothly. But sometimes, afeter some hours, web navigation begins to be slow. Does anyone knows what it could be?
I think that it may be a dns problem...
Thanks in advance.
24
Installation and Upgrades / Can't start printer server, proxy server or file server and no option for mail.
« on: May 20, 2010, 09:30:00 pm »
Hi guys,
I'm amazed with your truly good job with this project.
I'm using ubuntu server 10.04 (lucid) and i've done like i read on the tutorial, and it was installed correctly.
My only problem is that some modules are disabled and i can't enable it. I can't check the module.
I'm amazed with your truly good job with this project.
I'm using ubuntu server 10.04 (lucid) and i've done like i read on the tutorial, and it was installed correctly.
My only problem is that some modules are disabled and i can't enable it. I can't check the module.
Pages: 1 [2]