Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Kurtis

Pages: [1]
1
Installation and Upgrades / Build HTTP Module
« on: May 12, 2015, 04:48:37 pm »
Hi, I'm trying to build a module following the guide at https://wiki.zentyal.org/wiki/Building_and_maintaining_a_contrib_Zentyal_module however when I come to install the module it fails as the module is for pre 4.1. How can I build it for 4.1?

Thanks

2
Installation and Upgrades / Disable internet unless using Zentyal Proxy
« on: October 20, 2013, 05:30:34 pm »
How do I configure Zentyal so that users cannot access the internet unless using Zentyals proxy server?

3
Installation and Upgrades / IPSEC Roadwarrior
« on: September 25, 2013, 05:46:08 pm »
Hi, I have installed the IPSEC module on Zentyal 3.2 and have got my Android phone successfully connecting to it. However I cannot see any other computers on the physical network can only access the webadmin page for Zentyal. On openvpn there is a 'Allow Client to Client' checkbox.

4
Installation and Upgrades / Likewise Open Login Problems(Upstart)
« on: August 30, 2013, 01:33:07 am »
Have a Zentyal 3.1 server and have ubuntu 12.04 clients, the clients have likewise open install (latest powerbroker version). The clients can join and login to the domain fine, however when first powering on the client users have to wait about 20-30 seconds after the login screen has appeared before logging in otherwise they will receive a incorrect login error.

After much researching it appears that the reason this is happening is because the login is loading before the likewise service due to upstart.

Anybody know a way that i can sort this, either by not displaying the login screen until likewise is ready or ensuring that likewise is run before the login screen.

/edit: moved to Beta Testing and fixed size

5
Installation and Upgrades / Run PS3MediaServer or Plex without root
« on: April 25, 2013, 05:30:58 pm »
I am trying to install PS3MediaPlayer or plex on my server. The software runs fine, but because the music is located on one of my network shares I have to run the program as Root in order to let the program access the folder. The share is located at /home/samba/shares/shared.

Is there any way I can run the software without root?

Thanks :)

6
Installation and Upgrades / How to Secure OpenVPN?
« on: February 22, 2013, 01:18:30 am »
Hi, I have my VPN server setup and clients can connect fine. However how do I secure the VPN, as from what I can see certificate files can easily be copied from one of the client machines and can then be used on another device. I am running windows 7 and using the OpenVPN GUI setup as a service.

Many Thanks

7
Installation and Upgrades / Samba & CUPS - not printing
« on: January 24, 2013, 07:14:03 pm »
Hi, I have the file sharing module and printer sharing module installed. I have setup my HP printer within cups and a test page works, also connecting to the printer via IPP if fine. However when I connect to my printer with samba \\server\printer I cannot print.

When connecting to the printer I select the generic publisher imagesetter driver and all appears to be okay, except when i print nothing happens. There is no entry on the clients printer queue and also no entry on the cups server.

Seems there is a problem between samba and CUPS. Has anyone else had problems with printer sharing?

thx

8
Have a freshly installed Zentyal server with all updates installed, and have two windows clients one is windows 7 and the other is Vista SP1. Yesterday I installed the servers and joined both clients to the domain successfully. I used GPMC to assign a logon script in the default domain policy and checked that the computer and users GPOS applied and worked on both clients which they did.

However today the Vista client failed to access the samba shares (
server01.homenet.lan) with the error the server could not be found. I tried to ping the server using hostnames and IP and all were successful. I set the browser to use the Zentyal Proxy server (server01.homenet.lan) and the client connected to the proxy server fine.

I removed the vista client from the domain, rebooted and when i attempted to add the client to the domain again i enter the administrators username and password to add it to the domain but then receive an error message stating:

"The following error occured attempting to join the domain "homenet.lan":

The parameter is incorrect"

I have check the DHCP settings etc but cannot understand what is wrong.

At the same time the windows 7 client is working fine and can logon and access the shares correctly, although I have noticed that when i type gpupdate /force the results are not all successful. The error messages are:

The processing of Group Policy failed. Windows could not apply the registry-based policy settings for the Group Policy object LDAP://CN=User,CN=(31B2F340-016D-11D2-945F-00C04FB984F9),CN=Policies,CN=System,DC=homenet,DC=lan.

The processing of the Group Policy failed. Windows attempted to read the file
homenet.lan\sysvol\homenet.lan\Policies\=(31B2F340-016D-11D2-945F-00C04FB984F9)\gpt.ini

The GPRESULT shows that there was two errors while applying the GPOs the first was with the computer configuration and the error was:

Component Name Status Last Process Time Group Policy Infrastructure Failed 31/12/2012 18:47:15 Group Policy Infrastructure failed due to the error listed below.

Access is denied.

Note: Due to the GP Core failure, none of the other Group Policy components processed their policy. Consequently, status information for the other components is not available.

Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 31/12/2012 18:47:14 and 31/12/2012 18:47:15. and the second error was while applying user registry:

Group Policy Infrastructure Success 31/12/2012 18:47:16 Registry Failed 31/12/2012 18:47:16 Registry failed due to the error listed below.

Unspecified error

Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 31/12/2012 18:47:16 and 31/12/2012 18:47:16. Scripts Success 31/12/2012 18:33:35

I am able to successfully ping the IP addresses of the server as well as server01.homenet.lan and if i goto
homenet.lan\sysvol i can access the GPT.INI files manually. I have tried reinstalling Zentyal and the clients however the problem reappears.





Has anybody else experienced a problem like this, I have tried reistalling the server and clients but still no success, I have already submitted a ticket on trac but has not yet been accepted but wondered if anyone has noticed this with thier install.

http://trac.zentyal.org/ticket/5939

Thanks :)

9
Installation and Upgrades / Incorrect permissions on Sysvol share?
« on: December 03, 2012, 12:35:58 am »
I have a new installation of Zentyal 3.0, all modules are up to date. I have two users, one is the default administrator account, the other is standard user test account.

I have configured a logon script which is located at
server01\sysvol\homenet.lan\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\USER\Scripts\Logon\logon.bat
 
The logon script runs fine for the administrator account, however when logging in with the standard account the script does not run. After manually navigating to the logon.bat script and attempting to run the script i receive a access denied message but i am able to edit the logon script and copy files in the logon folder in sysvol.
 
It seems that there is a permissions issue as a standard user should not be able to modify the logon scripts. I have tried deleting the module and reinstalling but no luck. I have also searched the forums but cannot seem to see any similar issues.

I have submitted a ticket on trac, but thought i would also post it here aswell to see whether anybody else has this problem.

Many thanks

10
Installation and Upgrades / RADIUS ldap user not found
« on: September 14, 2012, 04:43:20 pm »
I have installed Zentyal 3.0 with Users & Groups and File Sharing and that is working fine, however I now want to use RADIUS for WiFi authentication. I have installed the RADIUS module and added a client (which is a DD-WRT) and have set the wireless settings on the access point to use the server.

However when I attempt to connect to the wireless network I am prompted for a username and password but no matter what username and password I enter into the wireless connection dialog the connection fails.

After looking in the log for radius, it says the username was not found in ldap. I have rebooted the server and tried again. This time the error message is different:

Auth Login: Incorrect

But I have checked the username and password and they are both correct.

Is this a bug within the RADIUS module or am I doing something wrong? Many thanks

Pages: [1]