Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Support System
« on: June 27, 2012, 11:00:38 am »
After checking this pdf document
http://www.zentyal.com/wp-content/uploads/2012/05/2012_full_zentyal_edition_comparition_chart_en.pdf
is it safe to assume that if we don't pay Zentyal Money $$ we will be getting a crappy software that won't work
or behave saintly most of the time ??
http://www.zentyal.com/wp-content/uploads/2012/05/2012_full_zentyal_edition_comparition_chart_en.pdf
is it safe to assume that if we don't pay Zentyal Money $$ we will be getting a crappy software that won't work
or behave saintly most of the time ??
2
Installation and Upgrades / Firewall
« on: May 16, 2012, 11:34:21 am »
Hello,
I've been fighting with this issue since morning.
I have a static host on a different subnet which I'm routing to via Zentyal.
It was working great yesterday but today the firewall keeps on dropping the connection to it
if access via anything expect of ping.
I also created an iptable rule via the web interface to explicitly allow it but still no good.
ACCEPT Any 192.168.1.250/32 any --
Chain fglobal (1 references)
target prot opt source destination
ACCEPT all -- anywhere 192.168.1.250
2012-05-16 12:22:38 eth1 eth1 172.16.0.249 192.168.1.250 TCP 41129 443 DROP
2012-05-16 12:13:00 eth1 eth1 172.16.0.249 192.168.1.250 TCP 47858 10000 DROP
So what am I doing wrong ?
Cheers.
I've been fighting with this issue since morning.
I have a static host on a different subnet which I'm routing to via Zentyal.
It was working great yesterday but today the firewall keeps on dropping the connection to it
if access via anything expect of ping.
I also created an iptable rule via the web interface to explicitly allow it but still no good.
ACCEPT Any 192.168.1.250/32 any --
Chain fglobal (1 references)
target prot opt source destination
ACCEPT all -- anywhere 192.168.1.250
2012-05-16 12:22:38 eth1 eth1 172.16.0.249 192.168.1.250 TCP 41129 443 DROP
2012-05-16 12:13:00 eth1 eth1 172.16.0.249 192.168.1.250 TCP 47858 10000 DROP
So what am I doing wrong ?
Cheers.
3
Installation and Upgrades / Widgets
« on: May 14, 2012, 03:23:41 pm »
Hello,
I need to create my own widget, I was able to modify the links-widget.mas,
but this one won't be called periodically.
Where should I place my widget and how to register it so it can be called periodically.
Cheers.
I need to create my own widget, I was able to modify the links-widget.mas,
but this one won't be called periodically.
Where should I place my widget and how to register it so it can be called periodically.
Cheers.
4
Installation and Upgrades / DHCP lease widget
« on: May 14, 2012, 09:32:45 am »
Hello,
I created multiple network objects, to fix IP addresses based on the machine MAC address,
and I also created an object with an ip range.
Now on the DHCP lease widget in dashboard, I only see the computer connected from the range
not from the fixed IPs.
Is that a bug? Is there a workaround so I can be able to see all the other connected computers?
Cheers
I created multiple network objects, to fix IP addresses based on the machine MAC address,
and I also created an object with an ip range.
Now on the DHCP lease widget in dashboard, I only see the computer connected from the range
not from the fixed IPs.
Is that a bug? Is there a workaround so I can be able to see all the other connected computers?
Cheers
5
Installation and Upgrades / BUGS!!! BUGS!!! BUGS!!! Extremely disappointed....
« on: April 11, 2011, 09:16:26 am »
I've been using this product since the days of ebox 1.4, I never used most of it's option but last week I did and what a disappointment it was.
Note:: On this box I have Zentyal 2.17, latest update so far with everything else updated.
1- In the installation I chose to skip the configuration of the mail server, because i don't need it and in this installation zentyal was giving me the chance to so. Well thanks to that I end up having a long list of nonworking users because I did not have a virtual mail configured (Again I don't want it nor need it) that made the hole list unusable, after some wasted time trying to figure out why the users aren't able to login to the shares yet they were able to login to the user corner with no problem.
I then enabled the email module, configured a dummy domain and tested with a new created user and tada I was in but that meant i had to delete all the users and add them again.
2- Why do you have options that don't actually do what they are supposed to do??
That was my second problem, I enabled the "Minimum Password Length" to 8 characters and guess what, when I was changing the password in the user corner one character was more then enough...
3- PROXY...
a- As I've read somewhere that you guys did a replication of the default profile to the new
created profiles(meaning the extension and mime list) but no it wasn't working.
b- I got that annoying error
http://www.shallalist.de/.
c- I set the proxy to scan an object, then I added a group to it. When I was choosing a
custom filter profile, Zentyal refused it by saying it only accept a custom profile...
(well this gave me a big laugh :p)
4- DHCP...
OMG this thing really get to my nerves, If i knew this would give me that many problems I wouldn't bothered with it in the first place. So I created three object list with each member in the first two list containing a list of ips a mac address and a host name(like instructed by the dhcp help). and the third object was a dhcp range. I created three virtual IPs then I assigned each object to it's IP in the dhcp interface. DHCP provided the wrong IP to the wrong machine, none of the object were given an ip only the last one with the range and after a while it stopped working.
5- GATEWAY...
This one is really weird
. I wanted to use the box as an internal firewall, so of course it had two ethernet, one for the lan and the other to take internet from my primary firewall/Router. I was able to ping the router from Zentyal but Zentyal refused to add the router as a gateway saying "Gateway unreachable". After some checking I really didn't know what wrong with it, so i had to enable the dhcp server from my router and give zentyal an ip.
There are plenty more bugs, but those where more likely to ruin my week, and my long waited weekend. I would really like some explanation and thank you.
Regards
Note:: On this box I have Zentyal 2.17, latest update so far with everything else updated.
1- In the installation I chose to skip the configuration of the mail server, because i don't need it and in this installation zentyal was giving me the chance to so. Well thanks to that I end up having a long list of nonworking users because I did not have a virtual mail configured (Again I don't want it nor need it) that made the hole list unusable, after some wasted time trying to figure out why the users aren't able to login to the shares yet they were able to login to the user corner with no problem.
I then enabled the email module, configured a dummy domain and tested with a new created user and tada I was in but that meant i had to delete all the users and add them again.
2- Why do you have options that don't actually do what they are supposed to do??
That was my second problem, I enabled the "Minimum Password Length" to 8 characters and guess what, when I was changing the password in the user corner one character was more then enough...
3- PROXY...
a- As I've read somewhere that you guys did a replication of the default profile to the new
created profiles(meaning the extension and mime list) but no it wasn't working.
b- I got that annoying error
Code: [Select]
The input contains invalid characters. All alphanumeric
characters, plus these non alphanumeric chars: /.?&+:-@ and spaces are allowed. when I was adding to add a url list. I tried both http://urlblacklist.com/ and http://www.shallalist.de/.
c- I set the proxy to scan an object, then I added a group to it. When I was choosing a
custom filter profile, Zentyal refused it by saying it only accept a custom profile...
(well this gave me a big laugh :p)
4- DHCP...
OMG this thing really get to my nerves, If i knew this would give me that many problems I wouldn't bothered with it in the first place. So I created three object list with each member in the first two list containing a list of ips a mac address and a host name(like instructed by the dhcp help). and the third object was a dhcp range. I created three virtual IPs then I assigned each object to it's IP in the dhcp interface. DHCP provided the wrong IP to the wrong machine, none of the object were given an ip only the last one with the range and after a while it stopped working.
5- GATEWAY...
This one is really weird
. I wanted to use the box as an internal firewall, so of course it had two ethernet, one for the lan and the other to take internet from my primary firewall/Router. I was able to ping the router from Zentyal but Zentyal refused to add the router as a gateway saying "Gateway unreachable". After some checking I really didn't know what wrong with it, so i had to enable the dhcp server from my router and give zentyal an ip.There are plenty more bugs, but those where more likely to ruin my week, and my long waited weekend. I would really like some explanation and thank you.
Regards
6
Installation and Upgrades / Intel® Server Board S5000VSA ---- RAID Support
« on: February 10, 2011, 11:06:08 am »
Hello,
I'm looking to upgrade my Zentyal server, and i want to use RAID this time.
The reason I'm posting this is because I bought a Dell server earlier which was
suppose to support RAID, well this is what the manual and the provider said,
but it end up being something that I later discovered to be fakeraid(never heard of it before).
So now I wanna make sure that this bored "Intel® Server Board S5000VSA" support RAID
before I actually buy it and end up waisting more money.
I did check with google regarding this bored but wasn't satisfied.
Any input is welcome...
Regards,
Reference::
http://www.intel.com/cd/channel/reseller/apac/eng/products/server/boards/dp/s5000vsa/feature/index.htm
I'm looking to upgrade my Zentyal server, and i want to use RAID this time.
The reason I'm posting this is because I bought a Dell server earlier which was
suppose to support RAID, well this is what the manual and the provider said,
but it end up being something that I later discovered to be fakeraid(never heard of it before).
So now I wanna make sure that this bored "Intel® Server Board S5000VSA" support RAID
before I actually buy it and end up waisting more money.
I did check with google regarding this bored but wasn't satisfied.
Any input is welcome...
Regards,
Reference::
http://www.intel.com/cd/channel/reseller/apac/eng/products/server/boards/dp/s5000vsa/feature/index.htm
7
Installation and Upgrades / Squid Bulk Input
« on: February 03, 2011, 10:42:41 am »
Hello,
I have many groups to be filtered, and each filter is different for each group.
So I need to add many url/domains/ip and even mimes to be opened or restricted, depending on the group.
I know this is easily done from the GUI, but the problem is that I have to add them one by one, which will take ages to do.
I also tried to add a custom whitelist and blacklist to a tar and upload it, but this will take some time to upload, but as this works for url/domains/ip, it dosen't work for mimes and extensions.
I was wondering if there was a way to do a bulk input from the shell?
thx in advance
I have many groups to be filtered, and each filter is different for each group.
So I need to add many url/domains/ip and even mimes to be opened or restricted, depending on the group.
I know this is easily done from the GUI, but the problem is that I have to add them one by one, which will take ages to do.
I also tried to add a custom whitelist and blacklist to a tar and upload it, but this will take some time to upload, but as this works for url/domains/ip, it dosen't work for mimes and extensions.
I was wondering if there was a way to do a bulk input from the shell?
thx in advance
8
Installation and Upgrades / API - Documentation
« on: December 10, 2010, 10:35:36 am »
hey,
I want to use some of Zentyal functionality directly from the terminal,
I managed to do few , after looking at some tutorial and so on, but i was
unable to find any official documentation that could help me out.
I'm not looking to build a module, all i want is to write some scripts to automate
some of the work.
So is there any kind of developers or API documentations that could ease my task?
thanks in advance.
I want to use some of Zentyal functionality directly from the terminal,
I managed to do few , after looking at some tutorial and so on, but i was
unable to find any official documentation that could help me out.
I'm not looking to build a module, all i want is to write some scripts to automate
some of the work.
So is there any kind of developers or API documentations that could ease my task?
thanks in advance.
Pages: [1]