This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
News and Announcements / Re: Migration guide from Zentyal 2.2 to Zentyal 3.0 published!
« on: September 16, 2014, 05:36:49 pm »http://oldtracker.zentyal.org/wiki/Documentation/Community/Migrate_2.2_to_3.0
Where else?!
This is gold! Thank you!
2
News and Announcements / Re: Migration guide from Zentyal 2.2 to Zentyal 3.0 published!
« on: September 15, 2014, 10:54:46 am »
Sad, that this Guide is offline this quickly.
Is there an archive for older Guides?
Is there an archive for older Guides?
3
Installation and Upgrades / Re: Project Manager error under Ebox 1.5 clean install
« on: October 24, 2011, 04:18:15 pm »
I know this topic is old, but thanks for this badass help!
4
Installation and Upgrades / Re: IPX
« on: June 08, 2010, 01:23:51 pm »
I know it's old, but we have to keep a dead man alive.
There are POS-Terminals running on DOS 6.22 and a NetWare 4.1x server.
The server has to be replaced.
There are POS-Terminals running on DOS 6.22 and a NetWare 4.1x server.
The server has to be replaced.
5
Installation and Upgrades / IPX
« on: June 08, 2010, 11:32:58 am »
We need to setup an Ebox Server in an IPX Network.
I know that Ubuntu support it with extra packages, but can Ebox handle IPX?
I know that Ubuntu support it with extra packages, but can Ebox handle IPX?
6
Installation and Upgrades / Re: [SOLVED] UI problem in EBox 1.5 with Firefox 3.6.3 - Impossible to save changes
« on: May 20, 2010, 01:04:35 pm »I was onto something when I wrote about Scriptaculous not being distributed with EBox: that's what's missing. In case someone has the same problem (check the contents of /usr/share/ebox/www/js/scriptaculous; there will be none), get Scriptaculous from it's site and extract the contents of src into /usr/share/ebox/www/js/scriptaculous.
One down, more to go...
Thank you so much, it saves my day
7
Installation and Upgrades / Re: Ebox 1.4rc1 repository
« on: February 02, 2010, 08:52:03 am »
will there be a version for jaunty too?
8
Installation and Upgrades / Re: [BUG] firewall WONT accept subnet /24 for internal LAN; only accepts /32 ?!?
« on: February 01, 2010, 01:03:37 pm »
It is standard.
If you want that clients can only access a specific server in your network, you have to use the server's ip and the netmask /32. This tells the Firewall that the IP is a specific host, not a network.
Please inform about networking.
If you want that clients can only access a specific server in your network, you have to use the server's ip and the netmask /32. This tells the Firewall that the IP is a specific host, not a network.
Please inform about networking.
9
Installation and Upgrades / Ebox 1.4rc1 repository
« on: February 01, 2010, 10:56:52 am »
Is there a way to install the new version on an existing Ubuntu, like version 1.3 and 1.2 on ppa.launchpad.net?
Or will it come out the next hours?
Or will it come out the next hours?
10
Installation and Upgrades / Re: Dashboard VPN widget bug
« on: December 02, 2009, 05:08:06 pm »
I prefer to see the VPN address.
If that's a feature, is there a workaround?
If that's a feature, is there a workaround?
11
Installation and Upgrades / Dashboard VPN widget bug
« on: December 02, 2009, 09:21:18 am »
Hello everybody,
I have a eBox as Gateway for my network with an external IP, i've
set up the VPN Server (eBox to eBox), made a bundle and imported it on our second
eBox server.
It was very easy to install, the connection is on and they can ping.
But there is a bug i want to report:
On the VPN Server, in the dashboard under VPN, is not the VPN address of the client. The
VPN address is 192.168.21.2(/24), but on the dashboard of the server is the external IP
of the router in front of the client, with a long portnumber.
My wish is to see the clients VPN address in this field, so i don't have to
lookup the IP on the client.
Here's a screenshot of the widget:
Maybe somebody has an idea to fix this?
The Server is a Ubuntu 9.04 (jaunty) Server Edition with eBox 1.3.6
I have a eBox as Gateway for my network with an external IP, i've
set up the VPN Server (eBox to eBox), made a bundle and imported it on our second
eBox server.
It was very easy to install, the connection is on and they can ping.
But there is a bug i want to report:
On the VPN Server, in the dashboard under VPN, is not the VPN address of the client. The
VPN address is 192.168.21.2(/24), but on the dashboard of the server is the external IP
of the router in front of the client, with a long portnumber.
My wish is to see the clients VPN address in this field, so i don't have to
lookup the IP on the client.
Here's a screenshot of the widget:
Maybe somebody has an idea to fix this?
The Server is a Ubuntu 9.04 (jaunty) Server Edition with eBox 1.3.6
Pages: [1]