Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / DHCP fixed address issue / Zentyal 2.2
« on: December 16, 2011, 12:10:30 pm »
Hi all,
I was running a zentyal older version for one year and a half without problem and I recently tried the last version on a test platform.
I did a fresh new install of Zentyal based on the iso download on the zentyal website .
My configuration version is the following:
root@zentyal:/etc/dhcp3# dpkg -l | grep "zentyal-"
ii language-pack-zentyal-fr 2.2.1 Zentyal translations for language French
ii zentyal-antivirus 2.2 Zentyal - Antivirus
ii zentyal-bwmonitor 2.2.4 Zentyal - Bandwidth Monitor
ii zentyal-ca 2.2.2 Zentyal - Certification Authority
ii zentyal-common 2.2.2 Zentyal - Common Library
ii zentyal-core 2.2.4 Zentyal - Core
ii zentyal-dhcp 2.2.1 Zentyal - DHCP Service
ii zentyal-dns 2.2.1 Zentyal - DNS Service
ii zentyal-ebackup 2.2.2 Zentyal - Backup
ii zentyal-firewall 2.2 Zentyal - Firewall
ii zentyal-ftp 2.2.1 Zentyal - FTP
ii zentyal-gateway 2.2 Zentyal - Gateway Suite
ii zentyal-ids 2.2 Zentyal - Intrusion Detection System
ii zentyal-infrastructure 2.2 Zentyal - Network Infrastructure Suite
ii zentyal-l7-protocols 2.2 Zentyal - Layer-7 Filter
ii zentyal-monitor 2.2.1 Zentyal - Monitor
ii zentyal-network 2.2.3 Zentyal - Network Configuration
ii zentyal-ntp 2.2 Zentyal - NTP Service
ii zentyal-objects 2.2 Zentyal - Network Objects
ii zentyal-office 2.2 Zentyal - Office Suite
ii zentyal-openvpn 2.2 Zentyal - VPN Service
ii zentyal-printers 2.2 Zentyal - Printer Sharing Service
ii zentyal-remoteservices 2.2.2 Zentyal - Cloud Client
ii zentyal-samba 2.2 Zentyal - File Sharing Service
ii zentyal-security 2.2 Zentyal - UTM Suite
ii zentyal-services 2.2 Zentyal - Network Services
ii zentyal-software 2.2.2 Zentyal - Software Management
ii zentyal-squid 2.2.1 Zentyal - HTTP Proxy (Cache and Filter)
ii zentyal-trafficshaping 2.2 Zentyal - Traffic Shaping
ii zentyal-usercorner 2.2 Zentyal - User Corner
ii zentyal-users 2.2.5 Zentyal - Users and Groups
ii zentyal-webserver 2.2.2 Zentyal - Web Server
My configuration is :
a server with two interfaces (eth0 internal - dhcp for lan) and eht1 for external.
I have activated the zentyal cache DNS and dhcp module (for eth0 interface).
My problem is concerning the DHCP configuration
I have defined a dynamic range from 192.168.10.100 to 192.168.10.250 which works very fine (adress is ok for new client, ping based on hostname is working fine within the LAN and internet access works also)
I wanted then to assign fixed IP address and then problems started.
I read a lot of post concerning ( "_", lowercase and this kind of issue) so I carefully set a name on my fixed IP client which is simple: hmi1
and I created a network object in the DHCP module, named: tnvit with one member which is:
name: hmi1
IP address: CIDR - 192.168.10.73
MAC address: 00:e0:4c:d4:5f:96
I saved the module and restart dhcp module and then I rebooted my client. I can see on the zentyal dashboard in the dhcp widget the following:
192.168.10.206 00:e0:4c:d4:5f:96 hmi1
so as you can see the dynamic range has been applied whatever the module configuration is. I tryed with a FQDN, a simple one, another machine with different MAC address...
I'm really lost and don't know how to troubleshoot anything.
Is there any configuration problem or known remainng particular issue I'm missing
Thanks in advance for your help
Snarf
I was running a zentyal older version for one year and a half without problem and I recently tried the last version on a test platform.
I did a fresh new install of Zentyal based on the iso download on the zentyal website .
My configuration version is the following:
root@zentyal:/etc/dhcp3# dpkg -l | grep "zentyal-"
ii language-pack-zentyal-fr 2.2.1 Zentyal translations for language French
ii zentyal-antivirus 2.2 Zentyal - Antivirus
ii zentyal-bwmonitor 2.2.4 Zentyal - Bandwidth Monitor
ii zentyal-ca 2.2.2 Zentyal - Certification Authority
ii zentyal-common 2.2.2 Zentyal - Common Library
ii zentyal-core 2.2.4 Zentyal - Core
ii zentyal-dhcp 2.2.1 Zentyal - DHCP Service
ii zentyal-dns 2.2.1 Zentyal - DNS Service
ii zentyal-ebackup 2.2.2 Zentyal - Backup
ii zentyal-firewall 2.2 Zentyal - Firewall
ii zentyal-ftp 2.2.1 Zentyal - FTP
ii zentyal-gateway 2.2 Zentyal - Gateway Suite
ii zentyal-ids 2.2 Zentyal - Intrusion Detection System
ii zentyal-infrastructure 2.2 Zentyal - Network Infrastructure Suite
ii zentyal-l7-protocols 2.2 Zentyal - Layer-7 Filter
ii zentyal-monitor 2.2.1 Zentyal - Monitor
ii zentyal-network 2.2.3 Zentyal - Network Configuration
ii zentyal-ntp 2.2 Zentyal - NTP Service
ii zentyal-objects 2.2 Zentyal - Network Objects
ii zentyal-office 2.2 Zentyal - Office Suite
ii zentyal-openvpn 2.2 Zentyal - VPN Service
ii zentyal-printers 2.2 Zentyal - Printer Sharing Service
ii zentyal-remoteservices 2.2.2 Zentyal - Cloud Client
ii zentyal-samba 2.2 Zentyal - File Sharing Service
ii zentyal-security 2.2 Zentyal - UTM Suite
ii zentyal-services 2.2 Zentyal - Network Services
ii zentyal-software 2.2.2 Zentyal - Software Management
ii zentyal-squid 2.2.1 Zentyal - HTTP Proxy (Cache and Filter)
ii zentyal-trafficshaping 2.2 Zentyal - Traffic Shaping
ii zentyal-usercorner 2.2 Zentyal - User Corner
ii zentyal-users 2.2.5 Zentyal - Users and Groups
ii zentyal-webserver 2.2.2 Zentyal - Web Server
My configuration is :
a server with two interfaces (eth0 internal - dhcp for lan) and eht1 for external.
I have activated the zentyal cache DNS and dhcp module (for eth0 interface).
My problem is concerning the DHCP configuration
I have defined a dynamic range from 192.168.10.100 to 192.168.10.250 which works very fine (adress is ok for new client, ping based on hostname is working fine within the LAN and internet access works also)
I wanted then to assign fixed IP address and then problems started.
I read a lot of post concerning ( "_", lowercase and this kind of issue) so I carefully set a name on my fixed IP client which is simple: hmi1
and I created a network object in the DHCP module, named: tnvit with one member which is:
name: hmi1
IP address: CIDR - 192.168.10.73
MAC address: 00:e0:4c:d4:5f:96
I saved the module and restart dhcp module and then I rebooted my client. I can see on the zentyal dashboard in the dhcp widget the following:
192.168.10.206 00:e0:4c:d4:5f:96 hmi1
so as you can see the dynamic range has been applied whatever the module configuration is. I tryed with a FQDN, a simple one, another machine with different MAC address...
I'm really lost and don't know how to troubleshoot anything.
Is there any configuration problem or known remainng particular issue I'm missing
Thanks in advance for your help
Snarf
2
Installation and Upgrades / how to share a NAS directory ?
« on: November 03, 2010, 02:55:32 pm »
Hi all,
This is probably a small problem but I don't know samba well enough (one of the reason I use zentyal).
I have a ubuntu 10.04 server running Zentyal 2.0 whith file sharing module active (2 eth connection (Internet and LAN).
I have also a NAS storage attached to the LAN network and i'd like the shares of this NAS being accessible via the zentyal server to benefit from the login credential of the zentyal PDC server.
In the share name of zentyal GUI interface, I just can't add addresslike //NASserver/shares is that normal (/ seem not to be supported) ?
How is this supposed to work ?
Thanks in advance
Snarf
EDIT 15:05
Sorry, my fault, during my different trials the "file system" has been reset to "directory under zentyal" to enter the share name...
The share is now added but I can't mount it from a client automatically (ubuntu 10.10 running zentyal desktop 0.2). Even with the connection pop up using the credentials (the one I declare during the share definition) and the domain name, Ubuntu returns "unable to mount"....
What can I try ?
This is probably a small problem but I don't know samba well enough (one of the reason I use zentyal).
I have a ubuntu 10.04 server running Zentyal 2.0 whith file sharing module active (2 eth connection (Internet and LAN).
I have also a NAS storage attached to the LAN network and i'd like the shares of this NAS being accessible via the zentyal server to benefit from the login credential of the zentyal PDC server.
In the share name of zentyal GUI interface, I just can't add addresslike //NASserver/shares is that normal (/ seem not to be supported) ?
How is this supposed to work ?
Thanks in advance
Snarf
EDIT 15:05
Sorry, my fault, during my different trials the "file system" has been reset to "directory under zentyal" to enter the share name...
The share is now added but I can't mount it from a client automatically (ubuntu 10.10 running zentyal desktop 0.2). Even with the connection pop up using the credentials (the one I declare during the share definition) and the domain name, Ubuntu returns "unable to mount"....
What can I try ?
3
Installation and Upgrades / Zarafa preliminary test
« on: September 02, 2010, 02:37:06 pm »
Hello Everybody,
I'm trying the new module zarafa on an ubuntu 10.04 server config.
Before that I used to use egroupware and I was able to get mail either from the egroupware web access or from a mail client (evolution / thunderbird).
Now with zarafa, when the module is active mails are accessible from zarafa web access but no more from other client. Is there a config to modify to change this (pop / imap OR leave mail on server OR get mail only when users is logged in zarafa).
Another point is : what is admin user / password to access zarafa ?
thanks in advance
Snarf
I'm trying the new module zarafa on an ubuntu 10.04 server config.
Before that I used to use egroupware and I was able to get mail either from the egroupware web access or from a mail client (evolution / thunderbird).
Now with zarafa, when the module is active mails are accessible from zarafa web access but no more from other client. Is there a config to modify to change this (pop / imap OR leave mail on server OR get mail only when users is logged in zarafa).
Another point is : what is admin user / password to access zarafa ?
thanks in advance
Snarf
4
Installation and Upgrades / Zarafa contact
« on: September 02, 2010, 01:25:35 pm »
Hi all,
I freshly reinstall everything based on Zentyal 2.0 in order to set up a mail server and groupware.
just a simple question concerning Zarafa.
I can access it without problem with the login / password of my ebox ldap settings. I am also able to browse these contacts from the zarafa mail. But in the contact menu I can't see anything ...
Am i missing a simple conf or is there something to customize to make them visible.
Thanks in advance and congratulations for this new release.
Snarf
I freshly reinstall everything based on Zentyal 2.0 in order to set up a mail server and groupware.
just a simple question concerning Zarafa.
I can access it without problem with the login / password of my ebox ldap settings. I am also able to browse these contacts from the zarafa mail. But in the contact menu I can't see anything ...
Am i missing a simple conf or is there something to customize to make them visible.
Thanks in advance and congratulations for this new release.
Snarf
5
Installation and Upgrades / basic ldap setting
« on: August 30, 2010, 01:36:43 pm »
Hi all,
I plan to install SOGo and make it work together with EBox. Before, because I'm really a total beginner with LDAP, I'm trying to understand a little bit better ldap setting and the way it is managed by EBox.
To do that I installed GQ software (I'm running an ubuntu 10.04) to externally connect to my ebox ldap but I can't succeed to connect to my ldap directory. To start, I just wanted to browse for the users I add in users and groups module.
So my basic questions are:
what kind of authentification should I set ? I guess SASL but using the password given in LDAP settings page of EBox does not allow me to connect.
I just configured the BaseDN in GQ being the one I saw in EBox. Am I missing something else ?
PS:
- firewall has been set to authorise ldap port.
- I can't find any logs for ldap module in EBox, is there somewhere I can check to help troublshooting ?
Thank you for helping me
I plan to install SOGo and make it work together with EBox. Before, because I'm really a total beginner with LDAP, I'm trying to understand a little bit better ldap setting and the way it is managed by EBox.
To do that I installed GQ software (I'm running an ubuntu 10.04) to externally connect to my ebox ldap but I can't succeed to connect to my ldap directory. To start, I just wanted to browse for the users I add in users and groups module.
So my basic questions are:
what kind of authentification should I set ? I guess SASL but using the password given in LDAP settings page of EBox does not allow me to connect.
I just configured the BaseDN in GQ being the one I saw in EBox. Am I missing something else ?
PS:
- firewall has been set to authorise ldap port.
- I can't find any logs for ldap module in EBox, is there somewhere I can check to help troublshooting ?
Thank you for helping me
6
Installation and Upgrades / [SOLVED] VPN config
« on: August 30, 2010, 11:41:46 am »
Hello everybody,
I'm starting configuring my Zentyal VPN server and I have (I guess) a totally beginner question.
I watched the tutorial "how to set up a vpn" but I'm stuck at the beginning. Actually, I don't understand the client configuration. In the video, for example, the ebox admin is never using the "Client" sub menu of the left banner "VPN" menu. It only uses the "Download client bundle" from the server sub menu.
Does this replace any client config ? how to use the client certificate I issued.
When I try to add a client, Ebox tells me that my server config is not finished, but I don't know what to add....
Finally, from a ubuntu client (connected on eth0 of ebox server (external) (eth1 being my LAN I want to access remotely)) I install openvpn package and try the :
openvpn --config mygeneratedebundle.conf and I got the following terminal answer:
PS: I added a rule in the firewall to allow vpn service (I let the port by default during the server conf)
Here is the log:
Thanks in advance for your help and again congratulations for this great software
Mon Aug 30 11:07:49 2010 OpenVPN 2.1.0 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 20 2010
Mon Aug 30 11:07:49 2010 WARNING: Make sure you understand the semantics of --tls-remote before using it (see the man page).
Mon Aug 30 11:07:49 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Aug 30 11:07:49 2010 WARNING: file 'clientCAname.pem' is group or others accessible
Mon Aug 30 11:07:49 2010 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted>
Mon Aug 30 11:07:49 2010 LZO compression initialized
Mon Aug 30 11:07:49 2010 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ]
Mon Aug 30 11:07:49 2010 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ]
Mon Aug 30 11:07:49 2010 Local Options hash (VER=V4): 'd79ca330'
Mon Aug 30 11:07:49 2010 Expected Remote Options hash (VER=V4): 'f7df56b8'
Mon Aug 30 11:07:49 2010 Socket Buffers: R=[124928->131072] S=[124928->131072]
Mon Aug 30 11:07:49 2010 UDPv4 link local: [undef]
Mon Aug 30 11:07:49 2010 UDPv4 link remote: [AF_INET]192.168.1.200:1194
Mon Aug 30 11:07:49 2010 TLS: Initial packet from [AF_INET]192.168.1.200:1194, sid=1a6d7cf1 264c552c
Mon Aug 30 11:07:49 2010 VERIFY OK: depth=1, /C=FR/ST=Region/L=City/O=CompanyName/CN=Certification_Authority_Certificate
Mon Aug 30 11:07:49 2010 VERIFY X509NAME OK: /C=FR/ST=Region/L=City/O=CompanyName/CN=vpn-vpn.companyname.com
Mon Aug 30 11:07:49 2010 VERIFY OK: depth=0, /C=FR/ST=Region/L=City/O=CompanyName/CN=vpn-vpn.companyname.com
Mon Aug 30 11:07:49 2010 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Mon Aug 30 11:07:49 2010 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Mon Aug 30 11:07:49 2010 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Mon Aug 30 11:07:49 2010 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Mon Aug 30 11:07:49 2010 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Mon Aug 30 11:07:49 2010 [vpn-vpn.companyname.com] Peer Connection Initiated with [AF_INET]192.168.1.200:1194
Mon Aug 30 11:07:51 2010 SENT CONTROL [vpn-vpn.companyname.com]: 'PUSH_REQUEST' (status=1)
Mon Aug 30 11:07:51 2010 PUSH: Received control message: 'PUSH_REPLY,route 192.168.5.0 255.255.255.0,route-gateway 192.168.10.1,ping 10,ping-restart 120,ifconfig 192.168.10.2 255.255.255.0'
Mon Aug 30 11:07:51 2010 OPTIONS IMPORT: timers and/or timeouts modified
Mon Aug 30 11:07:51 2010 OPTIONS IMPORT: --ifconfig/up options modified
Mon Aug 30 11:07:51 2010 OPTIONS IMPORT: route options modified
Mon Aug 30 11:07:51 2010 OPTIONS IMPORT: route-related options modified
Mon Aug 30 11:07:51 2010 ROUTE default_gateway=192.168.1.1
Mon Aug 30 11:07:51 2010 Note: Cannot ioctl TUNSETIFF tap: Operation not permitted (errno=1)
Mon Aug 30 11:07:51 2010 Note: Attempting fallback to kernel 2.2 TUN/TAP interface
Mon Aug 30 11:07:51 2010 Cannot allocate TUN/TAP dev dynamically
Mon Aug 30 11:07:51 2010 Exiting
I'm starting configuring my Zentyal VPN server and I have (I guess) a totally beginner question.
I watched the tutorial "how to set up a vpn" but I'm stuck at the beginning. Actually, I don't understand the client configuration. In the video, for example, the ebox admin is never using the "Client" sub menu of the left banner "VPN" menu. It only uses the "Download client bundle" from the server sub menu.
Does this replace any client config ? how to use the client certificate I issued.
When I try to add a client, Ebox tells me that my server config is not finished, but I don't know what to add....
Finally, from a ubuntu client (connected on eth0 of ebox server (external) (eth1 being my LAN I want to access remotely)) I install openvpn package and try the :
openvpn --config mygeneratedebundle.conf and I got the following terminal answer:
PS: I added a rule in the firewall to allow vpn service (I let the port by default during the server conf)
Here is the log:
Thanks in advance for your help and again congratulations for this great software
Mon Aug 30 11:07:49 2010 OpenVPN 2.1.0 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 20 2010
Mon Aug 30 11:07:49 2010 WARNING: Make sure you understand the semantics of --tls-remote before using it (see the man page).
Mon Aug 30 11:07:49 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Aug 30 11:07:49 2010 WARNING: file 'clientCAname.pem' is group or others accessible
Mon Aug 30 11:07:49 2010 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted>
Mon Aug 30 11:07:49 2010 LZO compression initialized
Mon Aug 30 11:07:49 2010 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ]
Mon Aug 30 11:07:49 2010 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ]
Mon Aug 30 11:07:49 2010 Local Options hash (VER=V4): 'd79ca330'
Mon Aug 30 11:07:49 2010 Expected Remote Options hash (VER=V4): 'f7df56b8'
Mon Aug 30 11:07:49 2010 Socket Buffers: R=[124928->131072] S=[124928->131072]
Mon Aug 30 11:07:49 2010 UDPv4 link local: [undef]
Mon Aug 30 11:07:49 2010 UDPv4 link remote: [AF_INET]192.168.1.200:1194
Mon Aug 30 11:07:49 2010 TLS: Initial packet from [AF_INET]192.168.1.200:1194, sid=1a6d7cf1 264c552c
Mon Aug 30 11:07:49 2010 VERIFY OK: depth=1, /C=FR/ST=Region/L=City/O=CompanyName/CN=Certification_Authority_Certificate
Mon Aug 30 11:07:49 2010 VERIFY X509NAME OK: /C=FR/ST=Region/L=City/O=CompanyName/CN=vpn-vpn.companyname.com
Mon Aug 30 11:07:49 2010 VERIFY OK: depth=0, /C=FR/ST=Region/L=City/O=CompanyName/CN=vpn-vpn.companyname.com
Mon Aug 30 11:07:49 2010 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Mon Aug 30 11:07:49 2010 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Mon Aug 30 11:07:49 2010 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Mon Aug 30 11:07:49 2010 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Mon Aug 30 11:07:49 2010 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Mon Aug 30 11:07:49 2010 [vpn-vpn.companyname.com] Peer Connection Initiated with [AF_INET]192.168.1.200:1194
Mon Aug 30 11:07:51 2010 SENT CONTROL [vpn-vpn.companyname.com]: 'PUSH_REQUEST' (status=1)
Mon Aug 30 11:07:51 2010 PUSH: Received control message: 'PUSH_REPLY,route 192.168.5.0 255.255.255.0,route-gateway 192.168.10.1,ping 10,ping-restart 120,ifconfig 192.168.10.2 255.255.255.0'
Mon Aug 30 11:07:51 2010 OPTIONS IMPORT: timers and/or timeouts modified
Mon Aug 30 11:07:51 2010 OPTIONS IMPORT: --ifconfig/up options modified
Mon Aug 30 11:07:51 2010 OPTIONS IMPORT: route options modified
Mon Aug 30 11:07:51 2010 OPTIONS IMPORT: route-related options modified
Mon Aug 30 11:07:51 2010 ROUTE default_gateway=192.168.1.1
Mon Aug 30 11:07:51 2010 Note: Cannot ioctl TUNSETIFF tap: Operation not permitted (errno=1)
Mon Aug 30 11:07:51 2010 Note: Attempting fallback to kernel 2.2 TUN/TAP interface
Mon Aug 30 11:07:51 2010 Cannot allocate TUN/TAP dev dynamically
Mon Aug 30 11:07:51 2010 Exiting
7
Installation and Upgrades / firewall port / service
« on: August 25, 2010, 05:18:02 pm »
Hi all,
I have a very simple question...
Indeed I am used to configure iptables by hand and I am lost with the firewall ebox module.
It doesn't show any port number but only service. Some of them can be easily deduced (ntp, ssh...) but some other are not obvious. For example, does "Mail system" refer to smtp ? It should not be pop or imap as they are unitary described but how to know.
Perhaps it could be usefull to display the port number associated with the service (or better to be able to change for customisation)
Thanks in advance
Snarf
I have a very simple question...
Indeed I am used to configure iptables by hand and I am lost with the firewall ebox module.
It doesn't show any port number but only service. Some of them can be easily deduced (ntp, ssh...) but some other are not obvious. For example, does "Mail system" refer to smtp ? It should not be pop or imap as they are unitary described but how to know.
Perhaps it could be usefull to display the port number associated with the service (or better to be able to change for customisation)
Thanks in advance
Snarf
8
Installation and Upgrades / Ebox usersandgroups master/slave configuration problem
« on: August 24, 2010, 05:04:55 pm »
Hi everybody
Up to now I never succeeded in having both ebox system with a master / slave LDAP config.
I was stuck with another "stringify" issue before and I can't make it work whatever the useful workaround I found on this forum.
I finally decided to restart from scratch to understand what I'm doing wrong.
Here I am ...
To troubleshoot my problem I install two VM running Ubuntu server 10.04
On each of them I installed Ebox (or since today Zentyal) package and from the GUI also the usersandgroups package.
One machine (named maintest) is set as master and the other one (mailtest) is set as slave connected to the previous LDAP master.
My problem is that is unable for me to get both machine synchronised correctly. It seems to work with management of users but never with groups. Even with users, the replication is done but I still get some message:
"slave-sync:79 main::__ANON__ - Trying to run method addUser with param Test01 on slave HASH(0x5c411f0) failed"
here is the log I get on both machine if this can help someone to give me a hand... I'm totally stuck with this....
I must confess I am absolute beginner with LDAP so I don't know how to troubleshoot but it worked previously so transparently with Ebox (at least when I'm using it as standalone !!)
Many thanks for your help in advance
here are the log...
On the master LDAP (maintest)
Syslog:
Aug 24 16:35:01 maintest slapd[15941]: connection_read(29): no connection!
Aug 24 16:35:02 maintest slapd[15941]: last message repeated 3 times
Aug 24 16:35:02 maintest slapd[15941]: <= bdb_equality_candidates: (hostname) not indexed
Aug 24 16:35:33 maintest slapd[15941]: connection_read(29): no connection!
Aug 24 16:35:33 maintest slapd[15941]: connection_read(29): no connection!
Ebox log: (I added some comments into brackets [...] to understand the behaviour difference)
[Fresh install - try to add some user on master and then to delete as they were not synchronised on slave]
2010/08/24 15:45:02 DEBUG> SOAPClient.pm:108 EBox::SOAPClient::__ANON__ - 500 Can't connect to mailtest:443 (Bad hostname 'mailtest')
2010/08/24 15:45:02 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method delUser with param Test02 on slave HASH(0x678e118) failed
2010/08/24 15:45:02 DEBUG> SOAPClient.pm:108 EBox::SOAPClient::__ANON__ - 500 Can't connect to mailtest:443 (Bad hostname 'mailtest')
2010/08/24 15:45:02 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method delUser with param Test01 on slave HASH(0x678e118) failed
2010/08/24 15:45:28 DEBUG> SOAPClient.pm:108 EBox::SOAPClient::__ANON__ - 500 Can't connect to mailtest:443 (Bad hostname 'mailtest')
2010/08/24 15:45:28 DEBUG> UsersAndGroups.pm:757 EBox::UsersAndGroups::__ANON__ - Unable to perform operation addUser with parameter Test01 on slave HASH(0x7f3d48a54190)
2010/08/24 15:46:00 DEBUG> SOAPClient.pm:108 EBox::SOAPClient::__ANON__ - 500 Can't connect to mailtest:443 (Bad hostname 'mailtest')
2010/08/24 15:46:00 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addUser with param Test01 on slave HASH(0x5c411f0) failed
2010/08/24 15:46:16 DEBUG> SOAPClient.pm:108 EBox::SOAPClient::__ANON__ - 500 Can't connect to mailtest:443 (Bad hostname 'mailtest')
[ I then completed /etc/hosts on both maintest and mailtest for them to know each other ]
[ Adding users is now possible on master and replicated on slave but still impossible with groups
]
2010/08/24 15:46:16 DEBUG> UsersAndGroups.pm:757 EBox::UsersAndGroups::__ANON__ - Unable to perform operation addGroup with parameter Test1 on slave HASH(0x7f3d489f2328)
2010/08/24 15:50:26 DEBUG> UsersAndGroups.pm:757 EBox::UsersAndGroups::__ANON__ - Unable to perform operation addGroup with parameter Test1 on slave HASH(0x7f3d48a7bdd0)
2010/08/24 15:55:45 DEBUG> UsersAndGroups.pm:757 EBox::UsersAndGroups::__ANON__ - Unable to perform operation addGroup with parameter Test1 on slave HASH(0x7f3d48a263e0)
2010/08/24 16:00:33 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x5a0e118) failed
2010/08/24 16:05:32 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x4e04108) failed
2010/08/24 16:10:33 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x6845118) failed
2010/08/24 16:15:33 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x656b118) failed
2010/08/24 16:17:02 INFO> Service.pm:670 EBox::Module::Service::restartService - Restarting service for module: events
2010/08/24 16:17:03 INFO> EventDaemon.pm:302 EBox::EventDaemon::_loadModules - EBox::Event::Dispatcher::Log loaded from registeredDispatchers
2010/08/24 16:20:33 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x549f118) failed
2010/08/24 16:25:32 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x56c7118) failed
2010/08/24 16:30:33 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x5565108) failed
2010/08/24 16:35:33 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x5101108) failed
On the slave (mailtest)
Syslog:
Aug 24 15:38:02 mailtest slapd[17084]: slapd starting
Aug 24 15:40:01 mailtest CRON[17266]: (root) CMD (/usr/share/ebox-usersandgroups/slave-sync)
Aug 24 15:40:01 mailtest CRON[17267]: (root) CMD (/usr/share/ebox/ebox-cronjob-runner >> /dev/null 2>&1)
Aug 24 15:45:01 mailtest CRON[18170]: (root) CMD (/usr/share/ebox-usersandgroups/slave-sync)
Aug 24 15:45:46 mailtest slapd[17054]: <= bdb_equality_candidates: (uid) not indexed
Aug 24 15:47:03 mailtest slapd[17054]: last message repeated 2 times
Aug 24 15:48:03 mailtest slapd[17054]: last message repeated 4 times
Aug 24 15:49:29 mailtest slapd[17054]: <= bdb_equality_candidates: (uid) not indexed
Aug 24 15:50:01 mailtest slapd[17054]: last message repeated 7 times
Aug 24 15:50:01 mailtest CRON[18368]: (root) CMD (/usr/share/ebox-usersandgroups/slave-sync)
Aug 24 15:50:01 mailtest CRON[18369]: (root) CMD (/usr/share/ebox/ebox-cronjob-runner >> /dev/null 2>&1)
Aug 24 15:50:47 mailtest slapd[17054]: <= bdb_equality_candidates: (uid) not indexed
Aug 24 15:52:04 mailtest slapd[17054]: last message repeated 5 times
Aug 24 15:54:22 mailtest slapd[17054]: <= bdb_equality_candidates: (uid) not indexed
Aug 24 15:55:01 mailtest slapd[17054]: last message repeated 10 times
Aug 24 15:55:01 mailtest CRON[18508]: (root) CMD (/usr/share/ebox-usersandgroups/slave-sync)
Aug 24 15:55:52 mailtest slapd[17054]: <= bdb_equality_candidates: (uid) not indexed
Aug 24 15:57:04 mailtest slapd[17054]: last message repeated 8 times
Ebox.log
2010/08/24 16:35:33 ERROR> UsersAndGroups.pm:2773 EBox::UsersAndGroups::waitSync - Replication failed
2010/08/24 16:40:05 DEBUG> UsersAndGroups.pm:2763 EBox::UsersAndGroups::waitSync - Master users: 3
2010/08/24 16:40:05 DEBUG> UsersAndGroups.pm:2764 EBox::UsersAndGroups::waitSync - Replica users: 3
2010/08/24 16:40:05 DEBUG> UsersAndGroups.pm:2765 EBox::UsersAndGroups::waitSync - Master groups: 2
2010/08/24 16:40:05 DEBUG> UsersAndGroups.pm:2766 EBox::UsersAndGroups::waitSync - Replica groups: 1
2010/08/24 16:40:08 DEBUG> UsersAndGroups.pm:2763 EBox::UsersAndGroups::waitSync - Master users: 3
2010/08/24 16:40:08 DEBUG> UsersAndGroups.pm:2764 EBox::UsersAndGroups::waitSync - Replica users: 3
2010/08/24 16:40:08 DEBUG> UsersAndGroups.pm:2765 EBox::UsersAndGroups::waitSync - Master groups: 2
2010/08/24 16:40:08 DEBUG> UsersAndGroups.pm:2766 EBox::UsersAndGroups::waitSync - Replica groups: 1
2010/08/24 16:40:11 DEBUG> UsersAndGroups.pm:2763 EBox::UsersAndGroups::waitSync - Master users: 3
2010/08/24 16:40:11 DEBUG> UsersAndGroups.pm:2764 EBox::UsersAndGroups::waitSync - Replica users: 3
2010/08/24 16:40:11 DEBUG> UsersAndGroups.pm:2765 EBox::UsersAndGroups::waitSync - Master groups: 2
2010/08/24 16:40:11 DEBUG> UsersAndGroups.pm:2766 EBox::UsersAndGroups::waitSync - Replica groups: 1
Up to now I never succeeded in having both ebox system with a master / slave LDAP config.
I was stuck with another "stringify" issue before and I can't make it work whatever the useful workaround I found on this forum.
I finally decided to restart from scratch to understand what I'm doing wrong.
Here I am ...
To troubleshoot my problem I install two VM running Ubuntu server 10.04
On each of them I installed Ebox (or since today Zentyal) package and from the GUI also the usersandgroups package.
One machine (named maintest) is set as master and the other one (mailtest) is set as slave connected to the previous LDAP master.
My problem is that is unable for me to get both machine synchronised correctly. It seems to work with management of users but never with groups. Even with users, the replication is done but I still get some message:
"slave-sync:79 main::__ANON__ - Trying to run method addUser with param Test01 on slave HASH(0x5c411f0) failed"
here is the log I get on both machine if this can help someone to give me a hand... I'm totally stuck with this....
I must confess I am absolute beginner with LDAP so I don't know how to troubleshoot but it worked previously so transparently with Ebox (at least when I'm using it as standalone !!)
Many thanks for your help in advance
here are the log...
On the master LDAP (maintest)
Syslog:
Aug 24 16:35:01 maintest slapd[15941]: connection_read(29): no connection!
Aug 24 16:35:02 maintest slapd[15941]: last message repeated 3 times
Aug 24 16:35:02 maintest slapd[15941]: <= bdb_equality_candidates: (hostname) not indexed
Aug 24 16:35:33 maintest slapd[15941]: connection_read(29): no connection!
Aug 24 16:35:33 maintest slapd[15941]: connection_read(29): no connection!
Ebox log: (I added some comments into brackets [...] to understand the behaviour difference)
[Fresh install - try to add some user on master and then to delete as they were not synchronised on slave]
2010/08/24 15:45:02 DEBUG> SOAPClient.pm:108 EBox::SOAPClient::__ANON__ - 500 Can't connect to mailtest:443 (Bad hostname 'mailtest')
2010/08/24 15:45:02 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method delUser with param Test02 on slave HASH(0x678e118) failed
2010/08/24 15:45:02 DEBUG> SOAPClient.pm:108 EBox::SOAPClient::__ANON__ - 500 Can't connect to mailtest:443 (Bad hostname 'mailtest')
2010/08/24 15:45:02 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method delUser with param Test01 on slave HASH(0x678e118) failed
2010/08/24 15:45:28 DEBUG> SOAPClient.pm:108 EBox::SOAPClient::__ANON__ - 500 Can't connect to mailtest:443 (Bad hostname 'mailtest')
2010/08/24 15:45:28 DEBUG> UsersAndGroups.pm:757 EBox::UsersAndGroups::__ANON__ - Unable to perform operation addUser with parameter Test01 on slave HASH(0x7f3d48a54190)
2010/08/24 15:46:00 DEBUG> SOAPClient.pm:108 EBox::SOAPClient::__ANON__ - 500 Can't connect to mailtest:443 (Bad hostname 'mailtest')
2010/08/24 15:46:00 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addUser with param Test01 on slave HASH(0x5c411f0) failed
2010/08/24 15:46:16 DEBUG> SOAPClient.pm:108 EBox::SOAPClient::__ANON__ - 500 Can't connect to mailtest:443 (Bad hostname 'mailtest')
[ I then completed /etc/hosts on both maintest and mailtest for them to know each other ]
[ Adding users is now possible on master and replicated on slave but still impossible with groups
]2010/08/24 15:46:16 DEBUG> UsersAndGroups.pm:757 EBox::UsersAndGroups::__ANON__ - Unable to perform operation addGroup with parameter Test1 on slave HASH(0x7f3d489f2328)
2010/08/24 15:50:26 DEBUG> UsersAndGroups.pm:757 EBox::UsersAndGroups::__ANON__ - Unable to perform operation addGroup with parameter Test1 on slave HASH(0x7f3d48a7bdd0)
2010/08/24 15:55:45 DEBUG> UsersAndGroups.pm:757 EBox::UsersAndGroups::__ANON__ - Unable to perform operation addGroup with parameter Test1 on slave HASH(0x7f3d48a263e0)
2010/08/24 16:00:33 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x5a0e118) failed
2010/08/24 16:05:32 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x4e04108) failed
2010/08/24 16:10:33 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x6845118) failed
2010/08/24 16:15:33 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x656b118) failed
2010/08/24 16:17:02 INFO> Service.pm:670 EBox::Module::Service::restartService - Restarting service for module: events
2010/08/24 16:17:03 INFO> EventDaemon.pm:302 EBox::EventDaemon::_loadModules - EBox::Event::Dispatcher::Log loaded from registeredDispatchers
2010/08/24 16:20:33 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x549f118) failed
2010/08/24 16:25:32 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x56c7118) failed
2010/08/24 16:30:33 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x5565108) failed
2010/08/24 16:35:33 DEBUG> slave-sync:79 main::__ANON__ - Trying to run method addGroup with param Test1 on slave HASH(0x5101108) failed
On the slave (mailtest)
Syslog:
Aug 24 15:38:02 mailtest slapd[17084]: slapd starting
Aug 24 15:40:01 mailtest CRON[17266]: (root) CMD (/usr/share/ebox-usersandgroups/slave-sync)
Aug 24 15:40:01 mailtest CRON[17267]: (root) CMD (/usr/share/ebox/ebox-cronjob-runner >> /dev/null 2>&1)
Aug 24 15:45:01 mailtest CRON[18170]: (root) CMD (/usr/share/ebox-usersandgroups/slave-sync)
Aug 24 15:45:46 mailtest slapd[17054]: <= bdb_equality_candidates: (uid) not indexed
Aug 24 15:47:03 mailtest slapd[17054]: last message repeated 2 times
Aug 24 15:48:03 mailtest slapd[17054]: last message repeated 4 times
Aug 24 15:49:29 mailtest slapd[17054]: <= bdb_equality_candidates: (uid) not indexed
Aug 24 15:50:01 mailtest slapd[17054]: last message repeated 7 times
Aug 24 15:50:01 mailtest CRON[18368]: (root) CMD (/usr/share/ebox-usersandgroups/slave-sync)
Aug 24 15:50:01 mailtest CRON[18369]: (root) CMD (/usr/share/ebox/ebox-cronjob-runner >> /dev/null 2>&1)
Aug 24 15:50:47 mailtest slapd[17054]: <= bdb_equality_candidates: (uid) not indexed
Aug 24 15:52:04 mailtest slapd[17054]: last message repeated 5 times
Aug 24 15:54:22 mailtest slapd[17054]: <= bdb_equality_candidates: (uid) not indexed
Aug 24 15:55:01 mailtest slapd[17054]: last message repeated 10 times
Aug 24 15:55:01 mailtest CRON[18508]: (root) CMD (/usr/share/ebox-usersandgroups/slave-sync)
Aug 24 15:55:52 mailtest slapd[17054]: <= bdb_equality_candidates: (uid) not indexed
Aug 24 15:57:04 mailtest slapd[17054]: last message repeated 8 times
Ebox.log
2010/08/24 16:35:33 ERROR> UsersAndGroups.pm:2773 EBox::UsersAndGroups::waitSync - Replication failed
2010/08/24 16:40:05 DEBUG> UsersAndGroups.pm:2763 EBox::UsersAndGroups::waitSync - Master users: 3
2010/08/24 16:40:05 DEBUG> UsersAndGroups.pm:2764 EBox::UsersAndGroups::waitSync - Replica users: 3
2010/08/24 16:40:05 DEBUG> UsersAndGroups.pm:2765 EBox::UsersAndGroups::waitSync - Master groups: 2
2010/08/24 16:40:05 DEBUG> UsersAndGroups.pm:2766 EBox::UsersAndGroups::waitSync - Replica groups: 1
2010/08/24 16:40:08 DEBUG> UsersAndGroups.pm:2763 EBox::UsersAndGroups::waitSync - Master users: 3
2010/08/24 16:40:08 DEBUG> UsersAndGroups.pm:2764 EBox::UsersAndGroups::waitSync - Replica users: 3
2010/08/24 16:40:08 DEBUG> UsersAndGroups.pm:2765 EBox::UsersAndGroups::waitSync - Master groups: 2
2010/08/24 16:40:08 DEBUG> UsersAndGroups.pm:2766 EBox::UsersAndGroups::waitSync - Replica groups: 1
2010/08/24 16:40:11 DEBUG> UsersAndGroups.pm:2763 EBox::UsersAndGroups::waitSync - Master users: 3
2010/08/24 16:40:11 DEBUG> UsersAndGroups.pm:2764 EBox::UsersAndGroups::waitSync - Replica users: 3
2010/08/24 16:40:11 DEBUG> UsersAndGroups.pm:2765 EBox::UsersAndGroups::waitSync - Master groups: 2
2010/08/24 16:40:11 DEBUG> UsersAndGroups.pm:2766 EBox::UsersAndGroups::waitSync - Replica groups: 1
9
Installation and Upgrades / Mail Server + Webmail
« on: July 30, 2010, 05:25:02 pm »
Hello,
I'm configuring a mail server on a ubuntu 10.04 server and I encounter problem with the webmail module (roundcube).
This server is also used as gateway from external world (internet) and LAN.
Indeed the mail server seems totally OK as an "evolution" ubuntu mail client configured on the LAN can send / receive mails without problems (even to / from outside my domain)
But when connecting to the webmail from the external interface, I 'm able to reveive mail but not to send (no error from the webmail but they never reached their recipient).
Looking at the mail.log exemple here after:
Jul 30 18:20:46 main dovecot: imap-login: Login: user=<xx.yy@companyname.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
Jul 30 18:20:46 main dovecot: IMAP(xx.yy@companyname.com): Disconnected: Logged out bytes=71/835
it seems that I can't grant access and am instantly disconnected.
It is possible to configure the way the webmail is connected to the mail server (TLS, authentification...).
Do some of you have a clue for me to overcome this issue.
Thanks in advance
Snarf
List of Ebox modules used:
ii ebox-antivirus 1.5.1-0ubuntu1~ppa1~lucid1 eBox - Antivirus
ii ebox-ca 1.5.3-0ubuntu1~ppa1~lucid1 eBox - Certification Authority
ii ebox-dhcp 1.5.2-0ubuntu1~ppa1~lucid1 eBox - DHCP Service
ii ebox-dns 1.5.1-1ubuntu1~ppa1~lucid1 eBox - DNS Service
ii ebox-firewall 1.5.3-0ubuntu1~ppa1~lucid1 eBox - Firewall
rc ebox-ftp 1.5.1-0ubuntu1~ppa1~lucid1 eBox - FTP
ii ebox-ids 1.5-1ubuntu1~ppa1~lucid1ubuntu1 eBox - Intrusion Detection System
ii ebox-mail 1.5.2-0ubuntu1~ppa1~lucid1 eBox - Mail Service
ii ebox-network 1.5.5-0ubuntu1~ppa1~lucid1 eBox - Network Configuration
ii ebox-ntp 1.5-0ubuntu1 eBox - NTP Service
ii ebox-objects 1.5.1-0ubuntu1~ppa1~lucid1 eBox - Network Objects
ii ebox-openvpn 1.5.3-1ubuntu1~ppa1~lucid1 eBox - VPN Service
rc ebox-printers 1.5-0ubuntu1 eBox - Printer Sharing
rc ebox-samba 1.5.6-0ubuntu1~ppa1~lucid1 eBox - File Sharing
ii ebox-services 1.5.3-0ubuntu1~ppa1~lucid1 eBox - Network Services
ii ebox-software 1.5.2-0ubuntu1~ppa1~lucid1 eBox - Software Management
rc ebox-squid 1.5.6-0ubuntu1~ppa1~lucid1 eBox - HTTP Proxy (Cache and Content Filter)
ii ebox-usersandgroups 1.5.3-0ubuntu1~ppa1~lucid1 eBox - Users and Groups
ii ebox-webmail 1.5.1-0ubuntu1~ppa1~lucid1 eBox - Web Mail Service
ii ebox-webserver 1.5.3-0ubuntu1~ppa1~lucid1 eBox - Web Server
I'm configuring a mail server on a ubuntu 10.04 server and I encounter problem with the webmail module (roundcube).
This server is also used as gateway from external world (internet) and LAN.
Indeed the mail server seems totally OK as an "evolution" ubuntu mail client configured on the LAN can send / receive mails without problems (even to / from outside my domain)
But when connecting to the webmail from the external interface, I 'm able to reveive mail but not to send (no error from the webmail but they never reached their recipient).
Looking at the mail.log exemple here after:
Jul 30 18:20:46 main dovecot: imap-login: Login: user=<xx.yy@companyname.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
Jul 30 18:20:46 main dovecot: IMAP(xx.yy@companyname.com): Disconnected: Logged out bytes=71/835
it seems that I can't grant access and am instantly disconnected.
It is possible to configure the way the webmail is connected to the mail server (TLS, authentification...).
Do some of you have a clue for me to overcome this issue.
Thanks in advance
Snarf
List of Ebox modules used:
ii ebox-antivirus 1.5.1-0ubuntu1~ppa1~lucid1 eBox - Antivirus
ii ebox-ca 1.5.3-0ubuntu1~ppa1~lucid1 eBox - Certification Authority
ii ebox-dhcp 1.5.2-0ubuntu1~ppa1~lucid1 eBox - DHCP Service
ii ebox-dns 1.5.1-1ubuntu1~ppa1~lucid1 eBox - DNS Service
ii ebox-firewall 1.5.3-0ubuntu1~ppa1~lucid1 eBox - Firewall
rc ebox-ftp 1.5.1-0ubuntu1~ppa1~lucid1 eBox - FTP
ii ebox-ids 1.5-1ubuntu1~ppa1~lucid1ubuntu1 eBox - Intrusion Detection System
ii ebox-mail 1.5.2-0ubuntu1~ppa1~lucid1 eBox - Mail Service
ii ebox-network 1.5.5-0ubuntu1~ppa1~lucid1 eBox - Network Configuration
ii ebox-ntp 1.5-0ubuntu1 eBox - NTP Service
ii ebox-objects 1.5.1-0ubuntu1~ppa1~lucid1 eBox - Network Objects
ii ebox-openvpn 1.5.3-1ubuntu1~ppa1~lucid1 eBox - VPN Service
rc ebox-printers 1.5-0ubuntu1 eBox - Printer Sharing
rc ebox-samba 1.5.6-0ubuntu1~ppa1~lucid1 eBox - File Sharing
ii ebox-services 1.5.3-0ubuntu1~ppa1~lucid1 eBox - Network Services
ii ebox-software 1.5.2-0ubuntu1~ppa1~lucid1 eBox - Software Management
rc ebox-squid 1.5.6-0ubuntu1~ppa1~lucid1 eBox - HTTP Proxy (Cache and Content Filter)
ii ebox-usersandgroups 1.5.3-0ubuntu1~ppa1~lucid1 eBox - Users and Groups
ii ebox-webmail 1.5.1-0ubuntu1~ppa1~lucid1 eBox - Web Mail Service
ii ebox-webserver 1.5.3-0ubuntu1~ppa1~lucid1 eBox - Web Server
Pages: [1]