Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
1
Directory and Authentication / DNS child failed .... after removing a DC from Network
« on: March 16, 2016, 09:15:59 pm »
Today i remove a "TestDC" from my Domain. On a Windows7 with RSAT I have removed all entries of this server. If i connect me with the DNS of Zentyal (4.0.10) then no entry of this "old" server is shown.
But my errorlog show me: "dns child failed to find name '79b21a2f-a284-477b-81c9-b8a564289b0a._msdcs.xxxx.lan' of type A"
I try to remove them with " samba-tool dns delete 192.168.100.90 UCS100030.lxxxxx.lan _msdcs.xxxxx.lan A 192.168.xxx.xxx -Uadmin" but the result is "ERROR: Record does not exist"
How can I remove the orphan entry? How can I do a DNS Cache Update? Or what is the problem?
BTW: I didn´t know the used IP of the DC anymore. I have them delete from with RSAT so I cannot see what I use
But my errorlog show me: "dns child failed to find name '79b21a2f-a284-477b-81c9-b8a564289b0a._msdcs.xxxx.lan' of type A"
I try to remove them with " samba-tool dns delete 192.168.100.90 UCS100030.lxxxxx.lan _msdcs.xxxxx.lan A 192.168.xxx.xxx -Uadmin" but the result is "ERROR: Record does not exist"
How can I remove the orphan entry? How can I do a DNS Cache Update? Or what is the problem?
BTW: I didn´t know the used IP of the DC anymore. I have them delete from with RSAT so I cannot see what I use
2
Installation and Upgrades / [Solved] Zentyal 4.0 - No user (only the Domain Admins) can access shares.
« on: January 19, 2015, 09:26:19 am »
I have upgrade from 3.4.8 to 4.0 on weekend.
After the upgrade no user can access the shares anymore. Only users with the right "Domain Admins" can go to shares. But that cannot be the solution (is in moment my quick and very dirty workaraound).
How can I restore the Shares Permissions working?
After the upgrade no user can access the shares anymore. Only users with the right "Domain Admins" can go to shares. But that cannot be the solution (is in moment my quick and very dirty workaraound).
How can I restore the Shares Permissions working?
3
Installation and Upgrades / [Solved] Zentyal 4.0 - Roaming Profiles not working
« on: January 19, 2015, 09:23:02 am »
On weekend I have migrate from 3.4.8 to 4.0
Most of them working fine. But the "Roaming Profile" is not working anymore. Everytime a user logon he is use a temporary Profile.
How can I fix it? How can I disable roaming and use a working feature for "roaming profiles"?
Solution: In the migration process the option "Use Roaming profiles" was lost. Reenable it is the solution
Most of them working fine. But the "Roaming Profile" is not working anymore. Everytime a user logon he is use a temporary Profile.
How can I fix it? How can I disable roaming and use a working feature for "roaming profiles"?
Solution: In the migration process the option "Use Roaming profiles" was lost. Reenable it is the solution
4
Installation and Upgrades / Upgrade from 3.4.8 to 4.0 - is that working?
« on: January 13, 2015, 11:27:00 am »
Hello to all,
we are using our zentyal only as domain controler and file sharing (Modules: Filesharing, Users & Computer , DHCP and DNS (ActiveDirectory))
Now we want to extend the infrastructure and want to use HA. I will install a fresh zentyal server. The actual version is 4.0.
Is it necessary to upgrade the current (old) server (3.4.
to 3.5 or 4.0 or can they work together?
If i must upgrade is the process working fine? How can I find a working description of the upgrading process?
thanks for the tipps and helping informations
we are using our zentyal only as domain controler and file sharing (Modules: Filesharing, Users & Computer , DHCP and DNS (ActiveDirectory))
Now we want to extend the infrastructure and want to use HA. I will install a fresh zentyal server. The actual version is 4.0.
Is it necessary to upgrade the current (old) server (3.4.
to 3.5 or 4.0 or can they work together?If i must upgrade is the process working fine? How can I find a working description of the upgrading process?
thanks for the tipps and helping informations
5
Installation and Upgrades / HA with Zentyal 3.4.8 / 4.0
« on: January 04, 2015, 07:13:54 pm »
I have a running Zentyal 3.4.8. I using only the Filesharing, Users & Computer , DHCP and DNS (ActiveDirectory)
Now I want to create a HA-Configuration. Is it better to install a second 3.4.8 or can I install 4.0 on a different PC and connect them to the 3.4.8?
The 3.4.8 is working fine - I have read that some users have problems after upgrade from 3.4.8 => 3.5 / 4.0
Very thanks for the needed informations
Now I want to create a HA-Configuration. Is it better to install a second 3.4.8 or can I install 4.0 on a different PC and connect them to the 3.4.8?
The 3.4.8 is working fine - I have read that some users have problems after upgrade from 3.4.8 => 3.5 / 4.0
Very thanks for the needed informations
6
Installation and Upgrades / [SOLVED] 3.4.8: Roaming Profiles
« on: September 26, 2014, 08:06:17 pm »
I using by a customer of me zentyal 3.4.8.
Today I see, that some users roaming profile not works. Everytime the user login it shows that it be used the last local profile.
In Eventlog I found entry with the message, that the dirve is full (the drive have 800GB free!!!!!)
I found out that some users have two directories: one with username and one with username.V2. All users they missed the V2-Version have problems with roaming.
I check the user permissions. I delete the folder on server. I switch the profile from server to lacao and back - all this didn´t work. Can someone give me a hint, what the problem is and how can i solve it?
Today I see, that some users roaming profile not works. Everytime the user login it shows that it be used the last local profile.
In Eventlog I found entry with the message, that the dirve is full (the drive have 800GB free!!!!!)
I found out that some users have two directories: one with username and one with username.V2. All users they missed the V2-Version have problems with roaming.
I check the user permissions. I delete the folder on server. I switch the profile from server to lacao and back - all this didn´t work. Can someone give me a hint, what the problem is and how can i solve it?
7
Installation and Upgrades / Zentyal and OpenChange with MS Outlook: What features realy working?
« on: September 13, 2014, 08:41:49 am »
Hello,
since the release of Zentyal and OpenChange I follow the ongoing work here. I was happy to see in Featurelist of version 3.4 "Native Microsoft Exchange Server® replacement" and with the release of 3.4 i installed it on the servers of one of my customer. Install was easy and fast. Outlook connect to OpenChange - I was happy.
Then I start the configure of OpenChange and the trouble starts: No way to set Access Rights for mailboxes - No chance to setup shared Mailboxes. Everytime I allow a user to open my mailbox, after the saving the setting and reopen, the setting is lost.
Now I hope Zentyal 4.0 will solve my problems - but I must see: the actual implementing of OpenChance have the same problems in my installation.
I use much time to investigate the reason. So I found the "original" OpenChange/SOGo Website and they say, that shared Mailsboxes is working. Here in the forum much users say, that Outlook/Zentyal/OpenChange work fine. But I no see, if they use the shared Mailbox feature.
Till end of the next month i must present a solution for a new server infrastructur to a customer of me. Fine would be, if OpenChange works like Exchange. But I think, that the developer need more time to present a 100% Replacement of MS Exchange
Please say me: I´m wrong? Is the installation of me buggy? What are the correct way to setup the shared mailbox feature (a basic feature for companies that use Exchange as a mailserver)? Can some other user here confirm/dismiss my observations?
Thanks for your comments
since the release of Zentyal and OpenChange I follow the ongoing work here. I was happy to see in Featurelist of version 3.4 "Native Microsoft Exchange Server® replacement" and with the release of 3.4 i installed it on the servers of one of my customer. Install was easy and fast. Outlook connect to OpenChange - I was happy.
Then I start the configure of OpenChange and the trouble starts: No way to set Access Rights for mailboxes - No chance to setup shared Mailboxes. Everytime I allow a user to open my mailbox, after the saving the setting and reopen, the setting is lost.
Now I hope Zentyal 4.0 will solve my problems - but I must see: the actual implementing of OpenChance have the same problems in my installation.
I use much time to investigate the reason. So I found the "original" OpenChange/SOGo Website and they say, that shared Mailsboxes is working. Here in the forum much users say, that Outlook/Zentyal/OpenChange work fine. But I no see, if they use the shared Mailbox feature.
Till end of the next month i must present a solution for a new server infrastructur to a customer of me. Fine would be, if OpenChange works like Exchange. But I think, that the developer need more time to present a 100% Replacement of MS Exchange
Please say me: I´m wrong? Is the installation of me buggy? What are the correct way to setup the shared mailbox feature (a basic feature for companies that use Exchange as a mailserver)? Can some other user here confirm/dismiss my observations?
Thanks for your comments
8
Installation and Upgrades / Export and Import Settings from 3.4 to 3.5
« on: July 01, 2014, 08:28:49 am »
I have a partial working domain on Zentyal 3.4
Now I want to upgrade to 3.5 - is it recommendet/possible to export the settings (like Domainusers etc.) and import in a new installation? Or what is the right way to do a fresh install of the DC?
Now I want to upgrade to 3.5 - is it recommendet/possible to export the settings (like Domainusers etc.) and import in a new installation? Or what is the right way to do a fresh install of the DC?
9
Installation and Upgrades / 3.4: OpenChange and Usergroups Accessrights on mailbox?
« on: June 16, 2014, 09:23:30 pm »
My "old" System use Windows 2000 and Exchange 2000. I have 10 Users and 5 Usergroups. In Exchange have all users their own Mailbox. Additional we have 4 mailxboxes for Special Needs. I have create a usergroup "AllMailBoxes". In this Usergroup are all users. This usergroup is connect to the special-Needs-Mailboxes. All Users can now read and send from this Special-Needs-Mailboxes.
Now we want to Change to Zentyal. I have seen, that Outlook 2010 that is connected to Openchange 3.4 now allow to set Access rights to usergroups, only users can selected.
How can I set the Access right of a Mailbox to usergroups? Is Outlook the right tool or which tool is needed?
Now we want to Change to Zentyal. I have seen, that Outlook 2010 that is connected to Openchange 3.4 now allow to set Access rights to usergroups, only users can selected.
How can I set the Access right of a Mailbox to usergroups? Is Outlook the right tool or which tool is needed?
10
Installation and Upgrades / 3.5: OpenChange and Outlook
« on: May 29, 2014, 12:06:11 pm »
I have some Problems to connect my Outlook Client with Zentyal OpenChange. I have installed it and can Access via the Webpage of SOGo to my accout.
The Client: Windows 7 (x86 - German Language) with all patches and Outlook 2010 Home and Business (same behavior with Office 2003 Professional). The Client is member of the Domain. The Zentyal Server can be resolve bei servername (ping szx100090). Firewall is disabled
Outlook: If I want to check the Name of the user they came up "Name (Server or Mailbox) cannot be resolve"-Error
I put in servername, ip, FQDN - but nothing works. How can I find out why I cannot connect to OpenChange
The Client: Windows 7 (x86 - German Language) with all patches and Outlook 2010 Home and Business (same behavior with Office 2003 Professional). The Client is member of the Domain. The Zentyal Server can be resolve bei servername (ping szx100090). Firewall is disabled
Outlook: If I want to check the Name of the user they came up "Name (Server or Mailbox) cannot be resolve"-Error
I put in servername, ip, FQDN - but nothing works. How can I find out why I cannot connect to OpenChange
11
Installation and Upgrades / [Solved] PEAR and Zentyal 3.4
« on: March 27, 2014, 06:24:24 pm »
My custom application needs PEAR to run. I have installed my application on a custom path.
Now I want to start, but the error of apache shows
I have installed pear via
What is missing?
Solution: In my conf I overwriting the php_value include_path with the value "."
Now I want to start, but the error of apache shows
Code: [Select]
[Thu Mar 27 18:00:30.653999 2014] [:error] [pid 31463] [client 127.0.0.1:59122] PHP Warning: require_once(PEAR/Registry.php): failed to open stream: No such file or directory in /HDD/SDB080_3TB/NETINST/www/install.php on $
[Thu Mar 27 18:00:30.654077 2014] [:error] [pid 31463] [client 127.0.0.1:59122] PHP Fatal error: require_once(): Failed opening required 'PEAR/Registry.php' (include_path='.') in /HDD/SDB080_3TB/NETINST/www/install.php on$
[Thu Mar 27 18:01:00.035945 2014] [:error] [pid 31464] [client 127.0.0.1:59124] PHP Warning: require_once(PEAR/Registry.php): failed to open stream: No such file or directory in /HDD/SDB080_3TB/NETINST/www/install.php on $
[Thu Mar 27 18:01:00.036017 2014] [:error] [pid 31464] [client 127.0.0.1:59124] PHP Fatal error: require_once(): Failed opening required 'PEAR/Registry.php' (include_path='.') in /HDD/SDB080_3TB/NETINST/www/install.php on$I have installed pear via
Code: [Select]
sudo apt-get install php-pearWhat is missing?
Solution: In my conf I overwriting the php_value include_path with the value "."
12
Installation and Upgrades / [Solved] Custom www alias with zentyal 3.4
« on: March 25, 2014, 07:10:59 pm »
how is possible to publish a website in zentyal?
The files must be on a different harddisk. I have try to adapt the /etc/apache2/httpd.conf and add
But the result is a 404-Error
What can I do or what is missing?
Thanks for help and response
The files must be on a different harddisk. I have try to adapt the /etc/apache2/httpd.conf and add
Code: [Select]
AddHandler cgi-script .cgi .pl
Alias /NETINST "/HDD/SDB080_3TB/NETINST/www/"
<Directory "/HDD/SDB080_3TB/NETINST/www">
Options Indexes FollowSymLinks Includes ExecCGI
Require all granted
</Directory>
But the result is a 404-Error
What can I do or what is missing?
Thanks for help and response
13
Installation and Upgrades / Upgrade from 3.3 to 3.4
« on: March 17, 2014, 11:11:49 am »
Hello,
today I load the new 3.4 ISO from zentyal. I wnat to start to upgrade, but I see no "Upgrade" procedure on the start. I can only "Delete all disk" or "Expertmode".
What is the right way to upgrade from 3.3 to 3.4? If the updates in the next days will chosen on my zentyal start page?
today I load the new 3.4 ISO from zentyal. I wnat to start to upgrade, but I see no "Upgrade" procedure on the start. I can only "Delete all disk" or "Expertmode".
What is the right way to upgrade from 3.3 to 3.4? If the updates in the next days will chosen on my zentyal start page?
14
Installation and Upgrades / Permission denied - Creating a share on second harddisk
« on: March 16, 2014, 11:22:38 pm »
I have Mount a new Harddisk on my zentyal 3.3 Server.
In fstab I have following entry:
I have create a main share called "SDB080_3TB" on "/HDD/SDB080_3TB" - It works and can be create.
Now I want to create a new Folder "DomainFiles" on this HDD and share them with the sharename "DomainFiles" - but the don´t work. The error is
What can I do to fix the Problem? What are the right permissions and owner of subdirectories to manage via Zentyal.
In fstab I have following entry:
Code: [Select]
UUID="48f9011b-4ec5-4eb4-9b7c-567d8644b71a" /HDD/SDB080_3TB ext4 errors=remount-ro,usrquota,grpquota,acl,user_xattr 0 1I have create a main share called "SDB080_3TB" on "/HDD/SDB080_3TB" - It works and can be create.
Now I want to create a new Folder "DomainFiles" on this HDD and share them with the sharename "DomainFiles" - but the don´t work. The error is
Code: [Select]
Zentyal could not access to directory '/HDD/SDB080_3TB/DomainFiles': Permission deniedWhat can I do to fix the Problem? What are the right permissions and owner of subdirectories to manage via Zentyal.
15
Installation and Upgrades / Own Buttons on Startpage
« on: March 13, 2014, 11:53:05 am »
I have installed Zentyal 3.3 and some additional applications for our Network. Some applications are Web-Apps. They works fine.
Is it possible to add some Buttons/Links on the startpage of zentyal to open the managementpages of the applications?
Is it possible to add some Buttons/Links on the startpage of zentyal to open the managementpages of the applications?
Pages: [1] 2