Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
1
Installation and Upgrades / Re: Zentyal gateway is lossing the packets
« on: January 03, 2011, 08:11:18 pm »
How about your switch? have you check the port or change the switch.
can you illustrate your topology.?
can you illustrate your topology.?
2
Installation and Upgrades / Re: Zentyal gateway is lossing the packets
« on: January 02, 2011, 08:12:40 pm »
Hi,
Have you check your gateway IP address maybe it conflicts with other IP that is why you got
an intermittent connection, check the Switch also if the port or switch has a problem.
Have you check your gateway IP address maybe it conflicts with other IP that is why you got
an intermittent connection, check the Switch also if the port or switch has a problem.
3
Installation and Upgrades / Re: Zentyal gateway is lossing the packets
« on: December 28, 2010, 04:08:10 am »
Have you check your clients ip address setup.? do you have firewall before zentyal.?
4
Installation and Upgrades / Re: FTP - Problem
« on: December 28, 2010, 04:05:57 am »
What is the exact problem that you encounter in FTP module of zentyal.?
5
Installation and Upgrades / Re: PPPoE and Local Network on same NIC
« on: November 28, 2010, 06:13:51 am »
Hi,
In my opinion you cannot connect you LAN with only single interface you must have 2 NIC for your zentyal server. One is for your external the other one is for your Internal or Private LAN. and also you cannot make zentyal as yout gateway because it is recommended in configuration. that you must have Internal and external.
Correct me if im wrong =)
In my opinion you cannot connect you LAN with only single interface you must have 2 NIC for your zentyal server. One is for your external the other one is for your Internal or Private LAN. and also you cannot make zentyal as yout gateway because it is recommended in configuration. that you must have Internal and external.
Correct me if im wrong =)
6
Installation and Upgrades / Re: Zentyal as a transparent bridge mode
« on: November 27, 2010, 01:19:41 am »
Ok solve my problem q^_^p
For those who want this kind of configuration in your network. i resolve it by doing
1.Install zentyal as Gateway
2.Provide 2 Interface Eth0 / Eth1. choose who will be your External
3.Make sure module (network,http proxy,usergroup,antivirus,l7 filtering) is working and enabled
4.Enable Transparent proxy in http proxy module
4.Modify network (eth0 as Bridge then provide a static IP with your preferred subnet) create new Br1
5.Modify network (eth1 Use bridge then use br1)
Thats it just plug a cross cable from eth1 going to your firewall or router then your Eth0 in you LAN.\
Thanks zentyal
For those who want this kind of configuration in your network. i resolve it by doing
1.Install zentyal as Gateway
2.Provide 2 Interface Eth0 / Eth1. choose who will be your External
3.Make sure module (network,http proxy,usergroup,antivirus,l7 filtering) is working and enabled
4.Enable Transparent proxy in http proxy module
4.Modify network (eth0 as Bridge then provide a static IP with your preferred subnet) create new Br1
5.Modify network (eth1 Use bridge then use br1)
Thats it just plug a cross cable from eth1 going to your firewall or router then your Eth0 in you LAN.\
Thanks zentyal
7
Installation and Upgrades / Re: Host unreachable
« on: November 24, 2010, 09:07:16 am »
if you want your user to login you must joint their pc to the domain you are created.
do you already have a domain a pdc.? in your zentyal server
do you already have a domain a pdc.? in your zentyal server
8
Installation and Upgrades / Re: Host unreachable
« on: November 24, 2010, 12:18:57 am »
If you created DNS it means you want to have fully qualified domain within your network
Name > ipaddress reverse IP > name to distinguish you user in you network.
theres a lot of advantage when using DNS. kindly check this site
http://tldp.org/HOWTO/DNS-HOWTO-5.html
=)
Name > ipaddress reverse IP > name to distinguish you user in you network.
theres a lot of advantage when using DNS. kindly check this site
http://tldp.org/HOWTO/DNS-HOWTO-5.html
=)
9
Installation and Upgrades / Re: Webserver in my LAN - DNS and Virtaul Host help needed!
« on: November 24, 2010, 12:12:26 am »
Have you try to change your firewall settings outgoing to zentyal allow the services.
=)
=)
10
Installation and Upgrades / Re: WEB UI not running
« on: November 24, 2010, 12:03:07 am »
Hi,
Try to check if apache is working #service apache2 status
Check your /var/log/ebox/error.log for possible error
try to run /etc/init.d/ebox start then check for possible error.
reply if this solve your issue
Try to check if apache is working #service apache2 status
Check your /var/log/ebox/error.log for possible error
try to run /etc/init.d/ebox start then check for possible error.
reply if this solve your issue
11
Installation and Upgrades / Re: [SOLVED] Unable to create second gateway interface
« on: November 21, 2010, 01:51:56 am »
Nice goodluck q^_^p
12
Installation and Upgrades / Re: Host unreachable
« on: November 21, 2010, 01:48:55 am »
@Zolf
You must put a DNS to your Zentyal first. if your internet type connection is DHCP.
i think it is automatically add to your DNS, if your using static add you ISP DNS or
you can use OpenDNS 208.67.222.222 and 208.67.220.220.
If you already has a DNS . Use the CLI of zentyal server type
nslookup google.com you must get a resolution if not your are not yet connected to the internet or
there is somthing wrong with your internet connection.
If you already have a working internet in your zentyal gateway. you can ping google.com.
then next thing is to have your client setup.
Ok let get back to your question.
the difference between the two is the DNS for the network is for your Zentyal to go out and resolve something to the internet if you dont have this you cannot browse or ping any websiteusign their name ex.www.yahoo.com,google.com etc.
The DNS in infrastructure is a service in your lan which will give you to add domain to your Private lan. for example you created a example.local this will be your domain for your private lan. the rest will be Computer1.example.local etc so you have a naming resolve within your lan.
Sorry my english is not that good hehhe.
You must put a DNS to your Zentyal first. if your internet type connection is DHCP.
i think it is automatically add to your DNS, if your using static add you ISP DNS or
you can use OpenDNS 208.67.222.222 and 208.67.220.220.
If you already has a DNS . Use the CLI of zentyal server type
nslookup google.com you must get a resolution if not your are not yet connected to the internet or
there is somthing wrong with your internet connection.
If you already have a working internet in your zentyal gateway. you can ping google.com.
then next thing is to have your client setup.
Ok let get back to your question.
the difference between the two is the DNS for the network is for your Zentyal to go out and resolve something to the internet if you dont have this you cannot browse or ping any websiteusign their name ex.www.yahoo.com,google.com etc.
The DNS in infrastructure is a service in your lan which will give you to add domain to your Private lan. for example you created a example.local this will be your domain for your private lan. the rest will be Computer1.example.local etc so you have a naming resolve within your lan.
Sorry my english is not that good hehhe.
13
Installation and Upgrades / Re: Host unreachable
« on: November 18, 2010, 04:20:41 pm »
Yes his correct if they said your possible problem is DNS you can use OpenDNS to check
if is working. try to ping google.com from you CLI after you change the DNS.
of try nslookup google.com check if is working
Or check you firewall first. allow any from.
Internal networks
internal to zentyal
test if you can ping the network.
I forgot try to add gateway to your zentyal server. in your network config =)
if is working. try to ping google.com from you CLI after you change the DNS.
of try nslookup google.com check if is working
Or check you firewall first. allow any from.
Internal networks
internal to zentyal
test if you can ping the network.
I forgot try to add gateway to your zentyal server. in your network config =)
14
Installation and Upgrades / Re: Unable to create second gateway interface
« on: November 18, 2010, 06:54:03 am »
have you try to manual add your eth3?
in /etc/network/interfaces
in /etc/network/interfaces
15
Installation and Upgrades / Re: Host unreachable
« on: November 18, 2010, 06:50:10 am »
check your firewall config.
change your domain into this 208.67.222.222
tell me is this is working
change your domain into this 208.67.222.222
tell me is this is working
Pages: [1] 2