This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
1
Installation and Upgrades / samba-common - update
« on: June 19, 2017, 09:06:40 am »
Hi,
is it really a good idea to update samba-common, when all the other components depend on a specific version of it?
To reenable my fileserver (zentyal 4.1) I downloaded the last version from /old/pool/main/s/samba which allowed me to reinstall samba and several other packages that had been removed due to not met dependencies.
Jens-Peter Otto
is it really a good idea to update samba-common, when all the other components depend on a specific version of it?
To reenable my fileserver (zentyal 4.1) I downloaded the last version from /old/pool/main/s/samba which allowed me to reinstall samba and several other packages that had been removed due to not met dependencies.
Jens-Peter Otto
2
Installation and Upgrades / Re: After 3.4 to 3.5 upgrade, Uses/Computers/File Sharing is broken
« on: October 31, 2014, 01:08:28 pm »I had the same issue. Purging the module and installing again solved the issue for me.
How did you do that, simply
Code: [Select]
# apt-get purge zentyal-samba
# apt-get install zentyal-samba ?
I guess I'd have to recreate all users, groups and shares after that?
tia,
Jens-Peter
3
News and Announcements / Re: Migration guide from Zentyal 2.2 to Zentyal 3.0 published!
« on: January 23, 2013, 09:34:28 am »
Too bad, but thank you anyways
4
News and Announcements / Re: Migration guide from Zentyal 2.2 to Zentyal 3.0 published!
« on: January 22, 2013, 04:02:35 pm »[...]
Any ideas?
See my question above. My question was actually a gentle "fix the documentation" type question. They left out the > in the command.Code: [Select]sudo perl dump-users-from-backup confbackupname.tar >users.csv
Thank you, that resulted at least in a users.csv, though the errormessages stay the same.
The "only" remaining problem is, that import-basic-modules seems not to do what I expected it to...
Or is it not its job to configure file sharing, shares and printers with their access rights?
5
News and Announcements / Re: Migration guide from Zentyal 2.2 to Zentyal 3.0 published!
« on: January 21, 2013, 01:37:25 pm »
I run into problems while trying to follow the instructions.
When doing the import-basic-modules I get:
dump-users-from-backup results in:
The old machine is on 2.2:
The new one is a newly installed 3.0.1:
Any ideas?
When doing the import-basic-modules I get:
Code: [Select]
root@hostname:~# perl import-basic-modules hostname_2013-01-21-101112.tar
Use of uninitialized value in uc at /usr/share/perl5/EBox/Types/DomainName.pm line 76, <GEN0> line 726.
Use of uninitialized value $value in substitution (s///) at /usr/share/perl5/EBox/Types/Host.pm line 169, <GEN0> line 736.
dump-users-from-backup results in:
Code: [Select]
root@hostname:~# perl dump-users-from-backup hostname_2013-01-21-101112.tar users.csv
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 120.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 545.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 589.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 633.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 677.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 721.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 765.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 809.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 853.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 897.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 941.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 985.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 1029.
Use of uninitialized value $description in join or string at dump-users-from-backup line 157, <GEN0> line 1047.
Use of uninitialized value $description in join or string at dump-users-from-backup line 157, <GEN0> line 1080.
Use of uninitialized value $description in join or string at dump-users-from-backup line 157, <GEN0> line 1097.
Use of uninitialized value $description in join or string at dump-users-from-backup line 157, <GEN0> line 1115.
Use of uninitialized value $description in join or string at dump-users-from-backup line 157, <GEN0> line 1133.
Use of uninitialized value $description in join or string at dump-users-from-backup line 157, <GEN0> line 1151.
Use of uninitialized value $description in join or string at dump-users-from-backup line 157, <GEN0> line 1168.
Use of uninitialized value $description in join or string at dump-users-from-backup line 157, <GEN0> line 1186.
Use of uninitialized value $description in join or string at dump-users-from-backup line 157, <GEN0> line 1203.
Use of uninitialized value $description in join or string at dump-users-from-backup line 131, <GEN0> line 1635.
write_file 'users.csv' - sysopen: Permission denied at dump-users-from-backup line 110.
The old machine is on 2.2:
Code: [Select]
root@hostname:~# dpkg -l |grep zentyal
[...]
ii zentyal-antivirus 2.2.2 Zentyal - Antivirus
ii zentyal-common 2.2.3 Zentyal - Common Library
ii zentyal-core 2.2.7 Zentyal - Core
ii zentyal-ebackup 2.2.5 Zentyal - Backup
ii zentyal-firewall 2.2.1 Zentyal - Firewall
ii zentyal-network 2.2.9 Zentyal - Network Configuration
ii zentyal-objects 2.2 Zentyal - Network Objects
ii zentyal-printers 2.2.2 Zentyal - Printer Sharing Service
ii zentyal-samba 2.2 Zentyal - File Sharing Service
ii zentyal-services 2.2 Zentyal - Network Services
ii zentyal-software 2.2.7 Zentyal - Software Management
ii zentyal-users 2.2.8 Zentyal - Users and Groups
The new one is a newly installed 3.0.1:
Code: [Select]
root@hostname:~# dpkg -l |grep zentyal
[...]
ii zentyal 3.0.1 Zentyal - Core metapackage
ii zentyal-antivirus 3.0 Zentyal - Antivirus
ii zentyal-common 3.0.5 Zentyal - Common Library
ii zentyal-core 3.0.10 Zentyal - Core
ii zentyal-dns 3.0.4 Zentyal - DNS Service
ii zentyal-ebackup 3.0.4 Zentyal - Backup
ii zentyal-firewall 3.0.1 Zentyal - Firewall
ii zentyal-network 3.0.1 Zentyal - Network Configuration
ii zentyal-ntp 3.0 Zentyal - NTP Service
ii zentyal-objects 3.0 Zentyal - Network Objects
ii zentyal-printers 3.0.1 Zentyal - Printer Sharing Service
ii zentyal-samba 3.0.12 Zentyal - File Sharing and Domain Services
ii zentyal-services 3.0.1 Zentyal - Network Services
ii zentyal-software 3.0.3 Zentyal - Software Management
ii zentyal-users 3.0.7 Zentyal - Users and Groups
Any ideas?
6
Installation and Upgrades / Re: Master / Slave with samba
« on: October 08, 2010, 10:42:55 am »
Hi haliparotin,
you can't have any module dependent on usersandgroups on the server
(compare http://trac.zentyal.org/wiki/Document/HowTo/EBoxMasterSlaveSetup )
Jens-Peter
you can't have any module dependent on usersandgroups on the server
(compare http://trac.zentyal.org/wiki/Document/HowTo/EBoxMasterSlaveSetup )
Jens-Peter
7
Installation and Upgrades / Re: Master / Slave with samba
« on: October 08, 2010, 09:07:28 am »
Hi,
I just wanted to try that.
However before doing so I discovered, that the group does exist within ldap on the client?!
So how do I get the client to authenticate using ldap?
Jens-Peter
I just wanted to try that.
However before doing so I discovered, that the group does exist within ldap on the client?!
So how do I get the client to authenticate using ldap?
Jens-Peter
8
Installation and Upgrades / Master / Slave with samba
« on: October 06, 2010, 12:26:38 pm »
On a fresh install with updated packages
Master:
I can't get the fileserver working.
Whenever I create a share that doesn't have guest access activated, samba does not come up again. In ebox.log i get:
Shouldn't the groups be synced by ldap as well?
Is there a way for me to debug this?
tia,
Jens-Peter
Master:
Quote
root@ebox-master:~# dpkg -l |grep -i eboxSlave:
ii ebox 2.0.2 Zentyal - Core
rc ebox-ca 2.0 Zentyal - Certification Authority
ii ebox-firewall 2.0 Zentyal - Firewall
ii ebox-network 2.0.1 Zentyal - Network Configuration
ii ebox-objects 2.0 Zentyal - Network Objects
ii ebox-services 2.0 Zentyal - Network Services
ii ebox-software 2.0 Zentyal - Software Management
ii ebox-usersandgroups 2.0.3 Zentyal - Users and Groups
rc john 1.7.6-1~ebox0~lucid0 active password cracking tool
ii libebox 2.0 Zentyal - Common Library
ii liborbit2 1:2.14.18-1+ebox1 libraries for ORBit2 - a CORBA ORB
Quote
root@fileserver-silk:~# dpkg -l |grep -i ebox
ii ebox 2.0.2 Zentyal - Core
ii ebox-antivirus 2.0.1 Zentyal - Antivirus
rc ebox-ca 2.0 Zentyal - Certification Authority
ii ebox-firewall 2.0 Zentyal - Firewall
ii ebox-network 2.0.1 Zentyal - Network Configuration
ii ebox-objects 2.0 Zentyal - Network Objects
ii ebox-samba 2.0 Zentyal - File Sharing
ii ebox-services 2.0 Zentyal - Network Services
ii ebox-software 2.0 Zentyal - Software Management
ii ebox-usersandgroups 2.0.3 Zentyal - Users and Groups
rc john 1.7.6-1~ebox0~lucid0 active password cracking tool
ii libebox 2.0 Zentyal - Common Library
ii liborbit2 1:2.14.18-1+ebox1 libraries for ORBit2 - a CORBA ORB
ii samba-vscan 0.3.6cbeta5ebox4-2 Samba virus scanning VFS module
I can't get the fileserver working.
Whenever I create a share that doesn't have guest access activated, samba does not come up again. In ebox.log i get:
Quote
Command output: .When trying to manually chown anything to the group "__USERS__" it fails as well.
Exit value: 1
2010/10/05 10:53:40 ERROR> Service.pm:675 EBox::Module::Service::__ANON__ - Error restarting service: root command mkdir -p /home/samba/shares/Software
chmod 0670 /home/samba/shares/Software
chown ebox:__USERS__ /home/samba/shares/Software failed.
Error output: chown: invalid group: `ebox:__USERS__'
Shouldn't the groups be synced by ldap as well?
Is there a way for me to debug this?
tia,
Jens-Peter
9
Installation and Upgrades / Users and Groups Master / Slave
« on: October 06, 2010, 11:56:56 am »
is this
still valid?
I would really appreciate, if it were possible to include other services on the master...
Thats actually, because I run into problems with synchronization all the time (see next post)
Jens-Peter
Quote
We must only install the usersandgroups module in the master Zentyal. If you install any module that depends on usersandgroups in the master, such as asterisk, mail or samba, the master/slave setup won't work. In order to install that module we'll run:(from Document/HowTo/EBoxMasterSlaveSetup)
still valid?
I would really appreciate, if it were possible to include other services on the master...
Thats actually, because I run into problems with synchronization all the time (see next post)
Jens-Peter
10
Installation and Upgrades / Re: Zentyal on Proxmox 1.6 not working
« on: October 05, 2010, 11:54:21 am »
I ran into the same problem and "solved" the cpu-load issue by logging in via ssh and setting "auto_login no" in /etc/slim.conf.
Just now I changed (in proxmox) the "Video Graphics Adapter" to "Standard VGA", which seems to solve the issue.
Jens-Peter
Just now I changed (in proxmox) the "Video Graphics Adapter" to "Standard VGA", which seems to solve the issue.
Jens-Peter
11
Installation and Upgrades / Samba shares, ACL
« on: August 19, 2010, 02:12:32 pm »
Hi,
I need to give the permissions "Read and write" and "Adminstrator" to a group.
This was no problem up to and including version 1.4.
Now I get an error "User/Group group/xxxx already exists"
Background:
This share is read only for most users (group AllUsers). The "select few" who may write need Administrator rights, since "read and write" only allows to change ones own files.
Adminstrator rights however doesn't allow you to write, when you are also in a group that only has read permission :-/
Therefore I need "Read and Write" as well!
(Or an added entry of all "admin users" into "write list" in the smb.conf, which in my opinion should be there anyways...)
How can I accomplish this?
Jens-Peter
I need to give the permissions "Read and write" and "Adminstrator" to a group.
This was no problem up to and including version 1.4.
Now I get an error "User/Group group/xxxx already exists"
Background:
This share is read only for most users (group AllUsers). The "select few" who may write need Administrator rights, since "read and write" only allows to change ones own files.
Adminstrator rights however doesn't allow you to write, when you are also in a group that only has read permission :-/
Therefore I need "Read and Write" as well!
(Or an added entry of all "admin users" into "write list" in the smb.conf, which in my opinion should be there anyways...)
How can I accomplish this?
Jens-Peter
12
Installation and Upgrades / Re: 1.5 Master/Slave "stringify"???
« on: July 28, 2010, 09:35:49 am »
I'm suffering from this as well (see http://trac.ebox-platform.com/ticket/2012 ).
As I see it, the error message does not concern the real problem. I think, "stringify" would print a human readable error message describing what went wrong.
Sadly that's the end of my perl knowledge
I had 1.5 already running (3 to 4 weeks ago). That suddenly stopped synchronizing (maybe after an update). Since earlier (with 1.3 or 1.4) deleting the client on the server and reinstalling usersandgroups on the client did the trick, I tried that.
From that moment the aforementioned error message emerges, when trying to connect the client to the server.
Strangely the server lists the client on its "Slave Status" page...
Regards,
Jens-Peter
As I see it, the error message does not concern the real problem. I think, "stringify" would print a human readable error message describing what went wrong.
Sadly that's the end of my perl knowledge
I had 1.5 already running (3 to 4 weeks ago). That suddenly stopped synchronizing (maybe after an update). Since earlier (with 1.3 or 1.4) deleting the client on the server and reinstalling usersandgroups on the client did the trick, I tried that.
From that moment the aforementioned error message emerges, when trying to connect the client to the server.
Strangely the server lists the client on its "Slave Status" page...
Regards,
Jens-Peter
13
Installation and Upgrades / Re: Ebox dashboard, page not found for some core functions (including Network)
« on: November 27, 2009, 11:06:22 am »are you using Internet Explorer?
I have to use whatever browser there is on the client computer.
Surprisingly on windows systems that often happens to be an IE...
I agree that it is not too high on the priority list, but it should be possible to do basic maintenance from all the major browsers.
Jens-Peter
14
News and Announcements / Re: eBox Platform 1.2 is ready to download
« on: July 31, 2009, 09:51:03 am »I've been upgrading since 1.0 testing and up to 1.2 testing even. It works great. What do you use eBox for? I use other things on my server not just eBox, and I tend to run into some pretty bad problems. If you listed what you used eBox for, we might be able to tell you what you need to do for an upgrade.we use in fact several eBoxes, usually just the samba component. I am not aware of one where the egroupware is actually used. Therefore an upgrade should not pose too many problems.
These servers are used within the administrative LAN of schools.
Regards,
Jens-Peter
15
News and Announcements / Re: eBox Platform 1.2 is ready to download
« on: July 27, 2009, 10:16:43 am »
Hi,
great work guys!
I hesitate to upgrade yet, since you say:
Do you mean to say that in the future an upgrade 1.0 -> 1.2.x is possible, or do you mean further upgrades from 1.2 -> 1.2.x will be possible?
Thanks,
Jens-Peter
great work guys!
I hesitate to upgrade yet, since you say:
Quote
Upgrading from 1.0 to 1.2 might fail. We recommend not to upgrade from 1.0 to 1.2 in production. If you upgrade, be prepared to reconfigure manually some modules. Future releases of 1.2.x should provide a smooth upgrade.
Do you mean to say that in the future an upgrade 1.0 -> 1.2.x is possible, or do you mean further upgrades from 1.2 -> 1.2.x will be possible?
Thanks,
Jens-Peter
Pages: [1] 2