Topics

1

Installation and Upgrades / DHCP on 5 ethernet with mac filternig does not work

« on: September 28, 2014, 01:33:44 pm »

OK, so here is the setup

Zentyal 3.5.3
modules installed :

Network       
Firewall    
DHCP    
DNS    
Events       
IPsec       
Logs       
NTP       
VPN    
Traffic Shaping    


ip setup:

eth0-eth6 LAN IP and eth7 wan

eth0 10.0.0.138
eth1 100.10.11.1
eth2 100.10.12.1
eth3 100.10.13.1
eth4 100.10.14.1
eth5 100.10.15.1
eth6 100.10.16.1

on eth0 and eth1 i have objects created and asigned to dhcp for a few pc-s
un eth6 i have dhcp defined and range 100.10.16.2 to 250

nou the problem is that my clients defined in objects with mac and ip get almost all tim ip-s from eth6 ( 100.10.16.x.)

am i missing something??

in the log 00:1D:72:A0:CC:9E should get ip from eth0 ( 10.0.0.x) not from eth6 ( 100.10.16.x ) as defined in objects

2

Installation and Upgrades / Add aditional HDD to Zentyal

« on: January 09, 2014, 06:09:18 pm »

Hello, i have zentyal nice and going for a few weeks
It is configured as a file server, giving shares for diferent users

My problem is that i am starting to run out of space
I have atached another hdd to the pc
How do i atache it to zentyal?
From the web GUI?


Any help apriciated
I am a little new to linux

3

Installation and Upgrades / Zentyal open bpn and ddwrt

« on: December 18, 2013, 09:49:50 pm »

Can anyone confirm that it can use a ddwrt based rooter as a client to zentyal openvpn?
I ask as it would be nice to set this up, so my home network to be in vpn with my work

I now have 3 rooters at home trying to set this up, but no luck so far

4

Installation and Upgrades / VPN betwene 2 offices and client not working

« on: November 24, 2013, 05:11:40 pm »

Ok, i got the setup like in the atachment, VPN betwene offices work's like a charm


Is it possible that my client, winch conects to Home Office A by vpn, to access the remote office B?

VPN used is OPEN VPN

5

Installation and Upgrades / Cannot Acess internal mail server vrom internal lan-s

« on: November 14, 2013, 04:05:44 pm »

Hello, i am new to zentyal, it is a bit diffrent from Microsoft TMG

I have the next setup:

Zentyal installed in VM, 8 LAN cards, 1 WAN, 7 Internal LAN ( different ip classes )

WAN- 82.77.58.XX - WAN ISP
LAN1 - 100.10.10.0 - internal, used for servers
LAn2 - 192.168.0.0 - service pc
Lan3 - 192.168.1.0 - service pc
Lan3 - 192.168.50.0 - DHCP Clients
Lan4 - 192.168.51.0 - DHCP Clients
Lan5 - 192.168.52.0 - DHCP Clients
Lan6 - 192.168.53.0 - used vor VPN


Our mail server is in 100.10.10.19
i cann acess the mail server from WAN, but from LAN ( any of them no )
packet filtering Firewall is configured momentary with ANY - to allow all trafic in
Firewall has port redirection for 25,110,143, 465, 995 on TCP ( ports used by mail server ) and forwarded to 100.10.10.19

Port forwarding is from
On the log of zentyal i can see:

imput interface      output interface        source       destination   protocol    source port   destination port   decision
eth4                     blank              192.168.0.10    82.77.58.XX       tcp                   xxxx             465                 drop


Am i missing something??? ( except some brain power )

Can anyone help me??