This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Installation and Upgrades / Re: Zentyal.me not resolving.
« on: August 24, 2014, 02:08:25 am »
I'm using zentyal 3.3 and since a couple of days ddns is failing again...
2
News and Announcements / Re: Zentyal 3.3 available!
« on: December 17, 2013, 09:33:56 pm »
http://trac.zentyal.org/wiki/Document/Announcement/3.3
correct the upgrade instractions (missing 1):
sudo sed -ri 's/zentyal(.)3.2/zentyal\3.3/g' /etc/apt/sources.list should be
sudo sed -ri 's/zentyal(.)3.2/zentyal\13.3/g' /etc/apt/sources.list
correct the upgrade instractions (missing 1):
sudo sed -ri 's/zentyal(.)3.2/zentyal\3.3/g' /etc/apt/sources.list should be
sudo sed -ri 's/zentyal(.)3.2/zentyal\13.3/g' /etc/apt/sources.list
3
Installation and Upgrades / Re: File Sharing and Domain Services3.2.9
« on: November 12, 2013, 09:02:42 am »
this fixes issue:
chmod 0600 /opt/samba4/private/tls/key.pem
chmod 0600 /opt/samba4/private/tls/key.pem
4
Installation and Upgrades / *Fixed* lost file sharing after upgrading to latest version today
« on: November 12, 2013, 08:41:44 am »
this fixes issue:
chmod 0600 /opt/samba4/private/tls/key.pem
chmod 0600 /opt/samba4/private/tls/key.pem
5
Installation and Upgrades / *solved*lost file sharing after upgrading to latest version today
« on: November 12, 2013, 07:35:58 am »
lost file sharing after upgrading to latest version today morning.
on webadmin shows file sharing stopped. restarting shows restarted correctly but module is stopped
zentyal error log shows:
2013/11/12 08:34:41 WARN> LDB.pm:197 EBox::LDB::safeConnect - Could not connect to Samba LDB: connect: Connection refused, retrying. (1 attempts)
2013/11/12 08:34:51 WARN> LDB.pm:197 EBox::LDB::safeConnect - Could not connect to Samba LDB: connect: Connection refused, retrying. (100 attempts)
2013/11/12 08:35:01 WARN> LDB.pm:197 EBox::LDB::safeConnect - Could not connect to Samba LDB: connect: Connection refused, retrying. (200 attempts)
2013/11/12 08:35:11 WARN> LDB.pm:197 EBox::LDB::safeConnect - Could not connect to Samba LDB: connect: Connection refused, retrying. (300 attempts)
2013/11/12 08:35:11 DEBUG> LDB.pm:201 EBox::LDB::safeConnect - FATAL: Could not connect to samba LDAP server: connect: Connection refused at /usr/share/perl5/EBox/LDB.pm line 201
EBox::LDB::safeConnect('EBox::LDB=HASH(0x5abcd60)') called at /usr/share/perl5/EBox/LDB.pm line 155
EBox::LDB::connection('EBox::LDB=HASH(0x5abcd60)') called at /usr/share/perl5/EBox/LDAPBase.pm line 95
EBox::LDAPBase::search('EBox::LDB=HASH(0x5abcd60)', 'HASH(0x5ac3d60)') called at /usr/share/perl5/EBox/LDB.pm line 272
EBox::LDB::domainSID('EBox::LDB=HASH(0x5abcd60)') called at /usr/share/zentyal-samba/s4sync line 71
on webadmin shows file sharing stopped. restarting shows restarted correctly but module is stopped
zentyal error log shows:
2013/11/12 08:34:41 WARN> LDB.pm:197 EBox::LDB::safeConnect - Could not connect to Samba LDB: connect: Connection refused, retrying. (1 attempts)
2013/11/12 08:34:51 WARN> LDB.pm:197 EBox::LDB::safeConnect - Could not connect to Samba LDB: connect: Connection refused, retrying. (100 attempts)
2013/11/12 08:35:01 WARN> LDB.pm:197 EBox::LDB::safeConnect - Could not connect to Samba LDB: connect: Connection refused, retrying. (200 attempts)
2013/11/12 08:35:11 WARN> LDB.pm:197 EBox::LDB::safeConnect - Could not connect to Samba LDB: connect: Connection refused, retrying. (300 attempts)
2013/11/12 08:35:11 DEBUG> LDB.pm:201 EBox::LDB::safeConnect - FATAL: Could not connect to samba LDAP server: connect: Connection refused at /usr/share/perl5/EBox/LDB.pm line 201
EBox::LDB::safeConnect('EBox::LDB=HASH(0x5abcd60)') called at /usr/share/perl5/EBox/LDB.pm line 155
EBox::LDB::connection('EBox::LDB=HASH(0x5abcd60)') called at /usr/share/perl5/EBox/LDAPBase.pm line 95
EBox::LDAPBase::search('EBox::LDB=HASH(0x5abcd60)', 'HASH(0x5ac3d60)') called at /usr/share/perl5/EBox/LDB.pm line 272
EBox::LDB::domainSID('EBox::LDB=HASH(0x5abcd60)') called at /usr/share/zentyal-samba/s4sync line 71
6
Installation and Upgrades / Re: problem with samba-clean installl of samba?
« on: September 25, 2013, 08:57:17 pm »
Can anyone suggest how to remove and purge samba configuration and rebuild from beggining?
7
Installation and Upgrades / problem with samba
« on: September 24, 2013, 03:59:06 pm »
can't backup my server settings due to samba errors...
Some error has happened in Zentyal:
Failed to check path '/mylan.lan/Policies/{31B2F340-016D-11D2-945F-00C04FB984F9}/User/Scripts': NT_STATUS_OBJECT_PATH_NOT_FOUND
further tests..
sudo samba-tool ntacl sysvolcheck
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
Processing section "[netlogon]"
Processing section "[sysvol]"
Processing section "[homes]"
Processing section "[public]"
Processing section "[training]"
Processing section "[print$]"
Processing section "[printers]"
ldb_wrap open of idmap.ldb
ERROR(<type 'exceptions.TypeError'>): uncaught exception - (2, 'No such file or directory')
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/__init__.py", line 175, in _run
return self.run(*args, **kwargs)
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/ntacl.py", line 249, in run
lp)
File "/opt/samba4/lib/python2.7/site-packages/samba/provision/__init__.py", line 1695, in checksysvolacl
direct_db_access)
File "/opt/samba4/lib/python2.7/site-packages/samba/provision/__init__.py", line 1646, in check_gpos_acl
domainsid, direct_db_access)
File "/opt/samba4/lib/python2.7/site-packages/samba/provision/__init__.py", line 1590, in check_dir_acl
fsacl = getntacl(lp, path, direct_db_access=direct_db_access, service=SYSVOL_SERVICE)
File "/opt/samba4/lib/python2.7/site-packages/samba/ntacls.py", line 73, in getntacl
xattr.XATTR_NTACL_NAME)
sudo samba-tool gpo aclcheck
ldb_wrap open of secrets.ldb
GENSEC backend 'gssapi_spnego' registered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'schannel' registered
GENSEC backend 'spnego' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
ERROR(runtime): uncaught exception - ('Could not find a DC for domain', RuntimeE rror('NT_STATUS_NETWORK_UNREACHABLE',))
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/__init__.py", line 175, in _run
return self.run(*args, **kwargs)
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/gpo.py", line 1120, in run
self.url = dc_url(self.lp, self.creds, H)
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/gpo.py", line 117, in dc_url
raise RuntimeError("Could not find a DC for domain", e)
Some error has happened in Zentyal:
Failed to check path '/mylan.lan/Policies/{31B2F340-016D-11D2-945F-00C04FB984F9}/User/Scripts': NT_STATUS_OBJECT_PATH_NOT_FOUND
further tests..
sudo samba-tool ntacl sysvolcheck
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
Processing section "[netlogon]"
Processing section "[sysvol]"
Processing section "[homes]"
Processing section "[public]"
Processing section "[training]"
Processing section "[print$]"
Processing section "[printers]"
ldb_wrap open of idmap.ldb
ERROR(<type 'exceptions.TypeError'>): uncaught exception - (2, 'No such file or directory')
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/__init__.py", line 175, in _run
return self.run(*args, **kwargs)
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/ntacl.py", line 249, in run
lp)
File "/opt/samba4/lib/python2.7/site-packages/samba/provision/__init__.py", line 1695, in checksysvolacl
direct_db_access)
File "/opt/samba4/lib/python2.7/site-packages/samba/provision/__init__.py", line 1646, in check_gpos_acl
domainsid, direct_db_access)
File "/opt/samba4/lib/python2.7/site-packages/samba/provision/__init__.py", line 1590, in check_dir_acl
fsacl = getntacl(lp, path, direct_db_access=direct_db_access, service=SYSVOL_SERVICE)
File "/opt/samba4/lib/python2.7/site-packages/samba/ntacls.py", line 73, in getntacl
xattr.XATTR_NTACL_NAME)
sudo samba-tool gpo aclcheck
ldb_wrap open of secrets.ldb
GENSEC backend 'gssapi_spnego' registered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'schannel' registered
GENSEC backend 'spnego' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
ERROR(runtime): uncaught exception - ('Could not find a DC for domain', RuntimeE rror('NT_STATUS_NETWORK_UNREACHABLE',))
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/__init__.py", line 175, in _run
return self.run(*args, **kwargs)
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/gpo.py", line 1120, in run
self.url = dc_url(self.lp, self.creds, H)
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/gpo.py", line 117, in dc_url
raise RuntimeError("Could not find a DC for domain", e)
8
Installation and Upgrades / Re: Problem to save as using microsoft office programs
« on: May 17, 2013, 06:24:11 pm »
I have exact the same problem. do you have clamav enabled on shares?
9
Installation and Upgrades / Re: samba 4 problem
« on: April 18, 2013, 02:08:12 pm »
my apt history log:
Start-Date: 2013-04-18 05:18:11
Commandline: apt-get upgrade
Upgrade: samba4:amd64 (4.0.4-zentyal1, 4.0.5-zentyal1)
End-Date: 2013-04-18 05:18:20
Start-Date: 2013-04-18 05:18:11
Commandline: apt-get upgrade
Upgrade: samba4:amd64 (4.0.4-zentyal1, 4.0.5-zentyal1)
End-Date: 2013-04-18 05:18:20
10
Installation and Upgrades / Re: Can't find folder netlogon on the PDC
« on: April 18, 2013, 01:57:57 pm »
the folder changed to
/opt/samba4/var/locks/sysvol/<domain_name>/scripts
/opt/samba4/var/locks/sysvol/<domain_name>/scripts
11
Installation and Upgrades / samba 4 problem
« on: April 18, 2013, 11:04:09 am »
after upgrading samba4 today i get these messages in zentyal.log
Processing section "[file]"
Processing section "[print$]"
Processing section "[printers]"
Processing section "[zentyal-quarantine]"
Initialising default vfs hooks
Initialising custom vfs hooks from [/[Default VFS]/]
Initialising custom vfs hooks from [acl_xattr]
Module 'acl_xattr' loaded
Initialising custom vfs hooks from [dfs_samba4]
unix_mode(/home/samba/shares/file) returning 0755
unix_mode(/home/samba/shares/file) returning 0644
ldb_wrap open of idmap.ldb
unpack_nt_owners: unable to validate owner sid for S-1-5-21-1688216112-2324110036-727074508-512
set_nt_acl_no_snum: fset_nt_acl returned NT_STATUS_INVALID_OWNER.
ERROR(runtime): uncaught exception - (-1073741734, 'NT_STATUS_INVALID_OWNER')
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/__init__.py", line 175, in _run
return self.run(*args, **kwargs)
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/ntacl.py", line 90, in run
setntacl(lp, file, acl, str(domain_sid), xattr_backend, eadb_file, use_ntvfs=use_ntvfs)
File "/opt/samba4/lib/python2.7/site-packages/samba/ntacls.py", line 154, in setntacl
smbd.set_nt_acl(file, security.SECINFO_OWNER | security.SECINFO_GROUP | security.SECINFO_DACL | security.SECINFO_SACL, sd)
Processing section "[file]"
Processing section "[print$]"
Processing section "[printers]"
Processing section "[zentyal-quarantine]"
Initialising default vfs hooks
Initialising custom vfs hooks from [/[Default VFS]/]
Initialising custom vfs hooks from [acl_xattr]
Module 'acl_xattr' loaded
Initialising custom vfs hooks from [dfs_samba4]
unix_mode(/home/samba/shares/file) returning 0755
unix_mode(/home/samba/shares/file) returning 0644
ldb_wrap open of idmap.ldb
unpack_nt_owners: unable to validate owner sid for S-1-5-21-1688216112-2324110036-727074508-512
set_nt_acl_no_snum: fset_nt_acl returned NT_STATUS_INVALID_OWNER.
ERROR(runtime): uncaught exception - (-1073741734, 'NT_STATUS_INVALID_OWNER')
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/__init__.py", line 175, in _run
return self.run(*args, **kwargs)
File "/opt/samba4/lib/python2.7/site-packages/samba/netcmd/ntacl.py", line 90, in run
setntacl(lp, file, acl, str(domain_sid), xattr_backend, eadb_file, use_ntvfs=use_ntvfs)
File "/opt/samba4/lib/python2.7/site-packages/samba/ntacls.py", line 154, in setntacl
smbd.set_nt_acl(file, security.SECINFO_OWNER | security.SECINFO_GROUP | security.SECINFO_DACL | security.SECINFO_SACL, sd)
12
Installation and Upgrades / [Solved]latest network module update problem
« on: April 12, 2013, 08:34:42 am »
latest /usr/share/perl5/EBox/Network/Model/DNSResolver.pm cuases problem to squid3..
Can't locate object method 'authenticationMode' via package 'EBox::Squid'
Can't locate object method 'authenticationMode' via package 'EBox::Squid' at /usr/share/perl5/EBox/Network/Model/DNSResolver.pm line 154.
restored from a backup the specific file and http proxy works again!!
Waiting a new fix from zentyal
Can't locate object method 'authenticationMode' via package 'EBox::Squid'
Can't locate object method 'authenticationMode' via package 'EBox::Squid' at /usr/share/perl5/EBox/Network/Model/DNSResolver.pm line 154.
restored from a backup the specific file and http proxy works again!!
Waiting a new fix from zentyal
13
Installation and Upgrades / Re: [SOLVED] !!!Beware of DNS updates (1:9.8.1.dfsg.P1-4ubuntu0.6)!!!
« on: April 02, 2013, 09:04:27 am »
ok fixed.
I had to first:
Try:
1 - sudo rm /var/lib/dpkg/info/*
2 - sudo apt-get update
3 - sudo apt-get upgrade
I had to first:
Try:
1 - sudo rm /var/lib/dpkg/info/*
2 - sudo apt-get update
3 - sudo apt-get upgrade
14
Installation and Upgrades / Re: [SOLVED] !!!Beware of DNS updates (1:9.8.1.dfsg.P1-4ubuntu0.6)!!!
« on: April 02, 2013, 08:53:50 am »
problem persists
running dpkg --configure -a writes
zentyal-dns depend on bind9 ubuntu0.5+zentyal1
running dpkg --configure -a writes
zentyal-dns depend on bind9 ubuntu0.5+zentyal1
15
Installation and Upgrades / Re: Push Printers with Group Policy
« on: March 13, 2013, 09:46:36 pm »
Follow this guide http://wiki.samba.org/index.php/Samba_AD_DC_HOWTO#Point_and_Print_Drivers
but the correct path is /opt/samba4/var/print
so make these directories:
mkdir -p /opt/samba4/var/print/{COLOR,IA64,W32ALPHA,W32MIPS,W32PPC,W32X86,WIN40,x64}
and then proceed with the rest
but the correct path is /opt/samba4/var/print
so make these directories:
mkdir -p /opt/samba4/var/print/{COLOR,IA64,W32ALPHA,W32MIPS,W32PPC,W32X86,WIN40,x64}
and then proceed with the rest