Zentyal Forum, Linux Small Business Server
Zentyal Server => Installation and Upgrades => Topic started by: dobocriugm on October 30, 2014, 08:59:55 pm
-
Hi,
I would need to set my main interface a 255.192.0.0 netmask.
Is there a way to do this?
Thanks!
Zentyal 4.0
-
That's a HUGE amount of addresses on a single network.....
-
I have 3 different VLAN (historically complicated...)
10.140.0.0/16
10.150.10.0/24
10.165.0.0/16
I need to be anble to provide DHCP for both of them from a Zentyal server in the 10.140.164.0 range
If you see an another option, let me know.
Thank you
-
Create the subnets as you had them before: 2 /16 subnets and 1 /24 subnet.
For each VLAN 1 subnet. Create 3 DHCP scopes for each subnet 1 scope....
If I recollect correctly, virtual nics can't have their own DHCP scope, so you have to use 3 fysical adapters for that. Assign each adapter a subnet and DHCP scope.