Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Re: Help with Zentyal RADIUS configuration. Need more detailed guide.
« on: September 20, 2010, 07:26:46 am »
should the NAS (access point) should have EAP TTLS PAP or the connecting machine? because on my access point, the options available on me are only RADIUS auth server IP, shared secret and port. encryption is AES+TKIP.
2
Installation and Upgrades / Re: Help with Zentyal RADIUS configuration. Need more detailed guide.
« on: September 17, 2010, 04:44:56 pm »
3
Installation and Upgrades / Re: Help with Zentyal RADIUS configuration. Need more detailed guide.
« on: September 13, 2010, 04:56:06 pm »
root@zentyal:/home/mamen# radtest test test 192.168.0.1:1812 1812 secret test-secret 192.168.0.2
Sending Access-Request of id 217 to 192.168.0.1 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 192.168.0.2
NAS-Port = 1812
Framed-Protocol = PPP
Sending Access-Request of id 217 to 192.168.0.1 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 192.168.0.2
NAS-Port = 1812
Framed-Protocol = PPP
Sending Access-Request of id 217 to 192.168.0.1 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 192.168.0.2
NAS-Port = 1812
Framed-Protocol = PPP
radclient: no response from server for ID 217 socket 3
*that's the output of radtest. I'm new at RADIUS. can you please provide me with a detailed configuration guide? my hardwares are:
1 Zentyal Server with 2 NICs (192.168.0.1)
1 Linksys WRT54GS router with dd-wr(configured as AP, this will be the NAS) wireless security set @ WPA Enterprise (192.168.0.2)
Help please..
Sending Access-Request of id 217 to 192.168.0.1 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 192.168.0.2
NAS-Port = 1812
Framed-Protocol = PPP
Sending Access-Request of id 217 to 192.168.0.1 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 192.168.0.2
NAS-Port = 1812
Framed-Protocol = PPP
Sending Access-Request of id 217 to 192.168.0.1 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 192.168.0.2
NAS-Port = 1812
Framed-Protocol = PPP
radclient: no response from server for ID 217 socket 3
*that's the output of radtest. I'm new at RADIUS. can you please provide me with a detailed configuration guide? my hardwares are:
1 Zentyal Server with 2 NICs (192.168.0.1)
1 Linksys WRT54GS router with dd-wr(configured as AP, this will be the NAS) wireless security set @ WPA Enterprise (192.168.0.2)
Help please..
4
Installation and Upgrades / Help with Zentyal RADIUS configuration. Need more detailed guide.
« on: September 11, 2010, 11:58:18 am »
I have setup Zentyal 2.0 RADIUS and add user in users and groups for testing. I have also configured my AP(Linksys WRT54GS, routing capability off, dedicated as an AP) as a NAS and I know that it's talking correctly with the RADIUS server. But I can't authenticate using the username and password at users and groups. It keeps asking and asking the UN/PWD. Tested both in fedora-linux and windows-7.
RADIUS server setting:
(WRT54GS with dd-wrt installed)
Client IP = 192.168.0.2/32
Shared secret: test
RADIUS client setting:
Security Mode: WPA Enterprise
WPA Algorithms: TKIP+AES
Radius Auth Server = 192.168.0.1
Port: 1812
Shared secret: test
Can anyone help me with this to make it work? A step by step guide clearer than the documentation will do. Thanks.
RADIUS server setting:
(WRT54GS with dd-wrt installed)
Client IP = 192.168.0.2/32
Shared secret: test
RADIUS client setting:
Security Mode: WPA Enterprise
WPA Algorithms: TKIP+AES
Radius Auth Server = 192.168.0.1
Port: 1812
Shared secret: test
Can anyone help me with this to make it work? A step by step guide clearer than the documentation will do. Thanks.
Pages: [1]