Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / System > Backup (Zentyal Version 2.2.7) - Says complete but files are missing
« on: January 08, 2013, 03:26:18 pm »
Hi
We backup approximately 750gb of a large number of small files.
The backup drive is mounted as a second hard disc in the same zentyal server.
The server shows aprox 46.95% free on source drive (dev/sda1) and after completed backup 55.7% free on destination drive (dev/sdb1).
No errors in log but backup does not include all files.
No excludes set in 'includes and excludes' other than default parameters:-
Excludes >
/var/tmp
/var/cache
/var/spool
/tmp
/media
/mnt
/sys
/proc
/dev
No includes.
Does the server restrict the length of time for the backup?
Is it possible to see a log entry or turn on a log so that you can see what was backed up / start time / finish time?
Thanks
We backup approximately 750gb of a large number of small files.
The backup drive is mounted as a second hard disc in the same zentyal server.
The server shows aprox 46.95% free on source drive (dev/sda1) and after completed backup 55.7% free on destination drive (dev/sdb1).
No errors in log but backup does not include all files.
No excludes set in 'includes and excludes' other than default parameters:-
Excludes >
/var/tmp
/var/cache
/var/spool
/tmp
/media
/mnt
/sys
/proc
/dev
No includes.
Does the server restrict the length of time for the backup?
Is it possible to see a log entry or turn on a log so that you can see what was backed up / start time / finish time?
Thanks
2
Installation and Upgrades / Enable individual users website (public_html)
« on: May 10, 2012, 10:32:25 am »
Dear all
I have enabled the option for 'Enable the public_html per user:'.
I have created a folder under a user account called 'public_html'
When I try to view the default website 'http://<zentyal server>' I get the default webpage.
When I try to view an individuals website 'http://<zentyal server>/~username1 I get 'page not found'.
Please would you let me know what more needs to be configured. Please note the error is not 'forbidden' but instead is 'page not found'.
Many thanks
Bruce
I have enabled the option for 'Enable the public_html per user:'.
I have created a folder under a user account called 'public_html'
When I try to view the default website 'http://<zentyal server>' I get the default webpage.
When I try to view an individuals website 'http://<zentyal server>/~username1 I get 'page not found'.
Please would you let me know what more needs to be configured. Please note the error is not 'forbidden' but instead is 'page not found'.
Many thanks
Bruce
3
Installation and Upgrades / Cannot install -' Infrastructure - Manage your network infrastructure'
« on: August 11, 2011, 12:05:03 pm »
My server is installed and works as a PDC, file server with users, groups, shares, etc.
I am trying to add the 'Infrastructure - Manage your network infrastructure' to add the DHCP server and VPN access features and get the following error message :-
root command apt-get -qq --no-install-recommends --simulate install zentyal-security zentyal-infrastructure failed. Error output: E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). Command output: . Exit value: 100
I have tried 'apt-get -f install' and receive the following message :-
root@isc-server:/etc/apt# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies...Done
The following packages were automatically installed and are no longer required:
linux-headers-2.6.32-28-generic-pae linux-headers-2.6.32-28
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
ebox-ebackup ebox-objects ebox-usersandgroups libebox
The following NEW packages will be installed
ebox-ebackup ebox-objects ebox-usersandgroups libebox
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
70 not fully installed or removed.
Need to get 0B/521kB of archives.
After this operation, 4,796kB of additional disk space will be used.
Do you want to continue [Y/n]? y
(Reading database ... 107660 files and directories currently installed.)
Unpacking libebox (from .../libebox_2.0.13_all.deb) ...
Replaced by files in installed package zentyal-common ...
dpkg: error processing /var/cache/apt/archives/libebox_2.0.13_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/AbstractDaemon.pm', which is also in package zentyal-core 0:2.1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Unpacking ebox-objects (from .../ebox-objects_2.0_all.deb) ...
dpkg: error processing /var/cache/apt/archives/ebox-objects_2.0_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/Objects/Model/MemberTable.pm', which is also in package zentyal-objects 0:2.1
Unpacking ebox-usersandgroups (from .../ebox-usersandgroups_2.0.12_all.deb) ...
Replaced by files in installed package zentyal-users ...
dpkg: error processing /var/cache/apt/archives/ebox-usersandgroups_2.0.12_all.deb (--unpack):
trying to overwrite '/etc/init/ebox.redis-usercorner.conf', which is also in package zentyal-usercorner 0:2.1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Unpacking ebox-ebackup (from .../ebox-ebackup_2.0.13_all.deb) ...
dpkg: error processing /var/cache/apt/archives/ebox-ebackup_2.0.13_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/EBackup.pm', which is also in package zentyal-ebackup 0:2.1
No apport report written because MaxReports is reached already
Processing triggers for ureadahead ...
Errors were encountered while processing:
/var/cache/apt/archives/libebox_2.0.13_all.deb
/var/cache/apt/archives/ebox-objects_2.0_all.deb
/var/cache/apt/archives/ebox-usersandgroups_2.0.12_all.deb
/var/cache/apt/archives/ebox-ebackup_2.0.13_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
The interface on my screen has no option for 'DHCP'.
Please advise.
Many thanks
Bruce
I am trying to add the 'Infrastructure - Manage your network infrastructure' to add the DHCP server and VPN access features and get the following error message :-
root command apt-get -qq --no-install-recommends --simulate install zentyal-security zentyal-infrastructure failed. Error output: E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). Command output: . Exit value: 100
I have tried 'apt-get -f install' and receive the following message :-
root@isc-server:/etc/apt# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies...Done
The following packages were automatically installed and are no longer required:
linux-headers-2.6.32-28-generic-pae linux-headers-2.6.32-28
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
ebox-ebackup ebox-objects ebox-usersandgroups libebox
The following NEW packages will be installed
ebox-ebackup ebox-objects ebox-usersandgroups libebox
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
70 not fully installed or removed.
Need to get 0B/521kB of archives.
After this operation, 4,796kB of additional disk space will be used.
Do you want to continue [Y/n]? y
(Reading database ... 107660 files and directories currently installed.)
Unpacking libebox (from .../libebox_2.0.13_all.deb) ...
Replaced by files in installed package zentyal-common ...
dpkg: error processing /var/cache/apt/archives/libebox_2.0.13_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/AbstractDaemon.pm', which is also in package zentyal-core 0:2.1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Unpacking ebox-objects (from .../ebox-objects_2.0_all.deb) ...
dpkg: error processing /var/cache/apt/archives/ebox-objects_2.0_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/Objects/Model/MemberTable.pm', which is also in package zentyal-objects 0:2.1
Unpacking ebox-usersandgroups (from .../ebox-usersandgroups_2.0.12_all.deb) ...
Replaced by files in installed package zentyal-users ...
dpkg: error processing /var/cache/apt/archives/ebox-usersandgroups_2.0.12_all.deb (--unpack):
trying to overwrite '/etc/init/ebox.redis-usercorner.conf', which is also in package zentyal-usercorner 0:2.1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Unpacking ebox-ebackup (from .../ebox-ebackup_2.0.13_all.deb) ...
dpkg: error processing /var/cache/apt/archives/ebox-ebackup_2.0.13_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/EBackup.pm', which is also in package zentyal-ebackup 0:2.1
No apport report written because MaxReports is reached already
Processing triggers for ureadahead ...
Errors were encountered while processing:
/var/cache/apt/archives/libebox_2.0.13_all.deb
/var/cache/apt/archives/ebox-objects_2.0_all.deb
/var/cache/apt/archives/ebox-usersandgroups_2.0.12_all.deb
/var/cache/apt/archives/ebox-ebackup_2.0.13_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
The interface on my screen has no option for 'DHCP'.
Please advise.
Many thanks
Bruce
4
Installation and Upgrades / Cannot install 'UTM - Leave the bad guys out'
« on: August 11, 2011, 12:02:30 pm »
My server is installed and works as a file server with users, groups, shares, etc.
I am trying to add the 'UTM - Leave the bad guys out' feature and get the following error message :-
root command apt-get -qq --no-install-recommends --simulate install zentyal-security failed. Error output: E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). Command output: . Exit value: 100 0
I have tried 'apt-get -f install' and receive the following message :-
root@isc-server:/etc/apt# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies...Done
The following packages were automatically installed and are no longer required:
linux-headers-2.6.32-28-generic-pae linux-headers-2.6.32-28
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
ebox-ebackup ebox-objects ebox-usersandgroups libebox
The following NEW packages will be installed
ebox-ebackup ebox-objects ebox-usersandgroups libebox
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
70 not fully installed or removed.
Need to get 0B/521kB of archives.
After this operation, 4,796kB of additional disk space will be used.
Do you want to continue [Y/n]? y
(Reading database ... 107660 files and directories currently installed.)
Unpacking libebox (from .../libebox_2.0.13_all.deb) ...
Replaced by files in installed package zentyal-common ...
dpkg: error processing /var/cache/apt/archives/libebox_2.0.13_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/AbstractDaemon.pm', which is also in package zentyal-core 0:2.1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Unpacking ebox-objects (from .../ebox-objects_2.0_all.deb) ...
dpkg: error processing /var/cache/apt/archives/ebox-objects_2.0_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/Objects/Model/MemberTable.pm', which is also in package zentyal-objects 0:2.1
Unpacking ebox-usersandgroups (from .../ebox-usersandgroups_2.0.12_all.deb) ...
Replaced by files in installed package zentyal-users ...
dpkg: error processing /var/cache/apt/archives/ebox-usersandgroups_2.0.12_all.deb (--unpack):
trying to overwrite '/etc/init/ebox.redis-usercorner.conf', which is also in package zentyal-usercorner 0:2.1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Unpacking ebox-ebackup (from .../ebox-ebackup_2.0.13_all.deb) ...
dpkg: error processing /var/cache/apt/archives/ebox-ebackup_2.0.13_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/EBackup.pm', which is also in package zentyal-ebackup 0:2.1
No apport report written because MaxReports is reached already
Processing triggers for ureadahead ...
Errors were encountered while processing:
/var/cache/apt/archives/libebox_2.0.13_all.deb
/var/cache/apt/archives/ebox-objects_2.0_all.deb
/var/cache/apt/archives/ebox-usersandgroups_2.0.12_all.deb
/var/cache/apt/archives/ebox-ebackup_2.0.13_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Please advise.
Many thanks
Bruce
I am trying to add the 'UTM - Leave the bad guys out' feature and get the following error message :-
root command apt-get -qq --no-install-recommends --simulate install zentyal-security failed. Error output: E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). Command output: . Exit value: 100 0
I have tried 'apt-get -f install' and receive the following message :-
root@isc-server:/etc/apt# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies...Done
The following packages were automatically installed and are no longer required:
linux-headers-2.6.32-28-generic-pae linux-headers-2.6.32-28
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
ebox-ebackup ebox-objects ebox-usersandgroups libebox
The following NEW packages will be installed
ebox-ebackup ebox-objects ebox-usersandgroups libebox
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
70 not fully installed or removed.
Need to get 0B/521kB of archives.
After this operation, 4,796kB of additional disk space will be used.
Do you want to continue [Y/n]? y
(Reading database ... 107660 files and directories currently installed.)
Unpacking libebox (from .../libebox_2.0.13_all.deb) ...
Replaced by files in installed package zentyal-common ...
dpkg: error processing /var/cache/apt/archives/libebox_2.0.13_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/AbstractDaemon.pm', which is also in package zentyal-core 0:2.1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Unpacking ebox-objects (from .../ebox-objects_2.0_all.deb) ...
dpkg: error processing /var/cache/apt/archives/ebox-objects_2.0_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/Objects/Model/MemberTable.pm', which is also in package zentyal-objects 0:2.1
Unpacking ebox-usersandgroups (from .../ebox-usersandgroups_2.0.12_all.deb) ...
Replaced by files in installed package zentyal-users ...
dpkg: error processing /var/cache/apt/archives/ebox-usersandgroups_2.0.12_all.deb (--unpack):
trying to overwrite '/etc/init/ebox.redis-usercorner.conf', which is also in package zentyal-usercorner 0:2.1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Unpacking ebox-ebackup (from .../ebox-ebackup_2.0.13_all.deb) ...
dpkg: error processing /var/cache/apt/archives/ebox-ebackup_2.0.13_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/EBackup.pm', which is also in package zentyal-ebackup 0:2.1
No apport report written because MaxReports is reached already
Processing triggers for ureadahead ...
Errors were encountered while processing:
/var/cache/apt/archives/libebox_2.0.13_all.deb
/var/cache/apt/archives/ebox-objects_2.0_all.deb
/var/cache/apt/archives/ebox-usersandgroups_2.0.12_all.deb
/var/cache/apt/archives/ebox-ebackup_2.0.13_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Please advise.
Many thanks
Bruce
5
Installation and Upgrades / Cannot install 'Gateway - Your access to Internet'
« on: August 11, 2011, 11:57:16 am »
My server is installed and works as a file server with users, groups, shares, etc.
I am trying to add the 'gateway' feature and get the following error message :-
root command apt-get -qq --no-install-recommends --simulate install zentyal-gateway failed. Error output: E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). Command output: . Exit value: 100
I have tried 'apt-get -f install' and receive the following message :-
root@isc-server:/etc/apt# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies...Done
The following packages were automatically installed and are no longer required:
linux-headers-2.6.32-28-generic-pae linux-headers-2.6.32-28
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
ebox-ebackup ebox-objects ebox-usersandgroups libebox
The following NEW packages will be installed
ebox-ebackup ebox-objects ebox-usersandgroups libebox
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
70 not fully installed or removed.
Need to get 0B/521kB of archives.
After this operation, 4,796kB of additional disk space will be used.
Do you want to continue [Y/n]? y
(Reading database ... 107660 files and directories currently installed.)
Unpacking libebox (from .../libebox_2.0.13_all.deb) ...
Replaced by files in installed package zentyal-common ...
dpkg: error processing /var/cache/apt/archives/libebox_2.0.13_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/AbstractDaemon.pm', which is also in package zentyal-core 0:2.1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Unpacking ebox-objects (from .../ebox-objects_2.0_all.deb) ...
dpkg: error processing /var/cache/apt/archives/ebox-objects_2.0_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/Objects/Model/MemberTable.pm', which is also in package zentyal-objects 0:2.1
Unpacking ebox-usersandgroups (from .../ebox-usersandgroups_2.0.12_all.deb) ...
Replaced by files in installed package zentyal-users ...
dpkg: error processing /var/cache/apt/archives/ebox-usersandgroups_2.0.12_all.deb (--unpack):
trying to overwrite '/etc/init/ebox.redis-usercorner.conf', which is also in package zentyal-usercorner 0:2.1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Unpacking ebox-ebackup (from .../ebox-ebackup_2.0.13_all.deb) ...
dpkg: error processing /var/cache/apt/archives/ebox-ebackup_2.0.13_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/EBackup.pm', which is also in package zentyal-ebackup 0:2.1
No apport report written because MaxReports is reached already
Processing triggers for ureadahead ...
Errors were encountered while processing:
/var/cache/apt/archives/libebox_2.0.13_all.deb
/var/cache/apt/archives/ebox-objects_2.0_all.deb
/var/cache/apt/archives/ebox-usersandgroups_2.0.12_all.deb
/var/cache/apt/archives/ebox-ebackup_2.0.13_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Please advise.
Many thanks
Bruce
I am trying to add the 'gateway' feature and get the following error message :-
root command apt-get -qq --no-install-recommends --simulate install zentyal-gateway failed. Error output: E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). Command output: . Exit value: 100
I have tried 'apt-get -f install' and receive the following message :-
root@isc-server:/etc/apt# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies...Done
The following packages were automatically installed and are no longer required:
linux-headers-2.6.32-28-generic-pae linux-headers-2.6.32-28
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
ebox-ebackup ebox-objects ebox-usersandgroups libebox
The following NEW packages will be installed
ebox-ebackup ebox-objects ebox-usersandgroups libebox
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
70 not fully installed or removed.
Need to get 0B/521kB of archives.
After this operation, 4,796kB of additional disk space will be used.
Do you want to continue [Y/n]? y
(Reading database ... 107660 files and directories currently installed.)
Unpacking libebox (from .../libebox_2.0.13_all.deb) ...
Replaced by files in installed package zentyal-common ...
dpkg: error processing /var/cache/apt/archives/libebox_2.0.13_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/AbstractDaemon.pm', which is also in package zentyal-core 0:2.1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Unpacking ebox-objects (from .../ebox-objects_2.0_all.deb) ...
dpkg: error processing /var/cache/apt/archives/ebox-objects_2.0_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/Objects/Model/MemberTable.pm', which is also in package zentyal-objects 0:2.1
Unpacking ebox-usersandgroups (from .../ebox-usersandgroups_2.0.12_all.deb) ...
Replaced by files in installed package zentyal-users ...
dpkg: error processing /var/cache/apt/archives/ebox-usersandgroups_2.0.12_all.deb (--unpack):
trying to overwrite '/etc/init/ebox.redis-usercorner.conf', which is also in package zentyal-usercorner 0:2.1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Unpacking ebox-ebackup (from .../ebox-ebackup_2.0.13_all.deb) ...
dpkg: error processing /var/cache/apt/archives/ebox-ebackup_2.0.13_all.deb (--unpack):
trying to overwrite '/usr/share/perl5/EBox/EBackup.pm', which is also in package zentyal-ebackup 0:2.1
No apport report written because MaxReports is reached already
Processing triggers for ureadahead ...
Errors were encountered while processing:
/var/cache/apt/archives/libebox_2.0.13_all.deb
/var/cache/apt/archives/ebox-objects_2.0_all.deb
/var/cache/apt/archives/ebox-usersandgroups_2.0.12_all.deb
/var/cache/apt/archives/ebox-ebackup_2.0.13_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Please advise.
Many thanks
Bruce
6
Installation and Upgrades / Remote SSH as root user
« on: August 09, 2011, 10:59:22 am »
Hi
I can SSH as an ordinary user, but when I try to 'su' to root account, or login as root account I get a response 'Access Denied'. I know I am using the correct password. How do I get root level access using SSH from a remote terminal?
Thanks
Bruce
I can SSH as an ordinary user, but when I try to 'su' to root account, or login as root account I get a response 'Access Denied'. I know I am using the correct password. How do I get root level access using SSH from a remote terminal?
Thanks
Bruce
7
Installation and Upgrades / Transfer users when upgrading hardware
« on: May 27, 2011, 11:39:30 am »
Hi
I am looking to upgrade the hardware for our server. I will also re-install the operating system. I can setup the shares and transfer the files easily enough. How do I export and transfer over the users and groups with their existing passwords?
Thanks
I am looking to upgrade the hardware for our server. I will also re-install the operating system. I can setup the shares and transfer the files easily enough. How do I export and transfer over the users and groups with their existing passwords?
Thanks
8
Installation and Upgrades / CUPS Printer queue 'Stopped'
« on: May 25, 2011, 01:00:38 pm »
Hi
I am trying to connect using LPD to an HP P1005 printer hosted on a windows computer.
I managed to connect to the printer and see documents arriving in the Windows print queue but they did not print out. I have changed to the correct printer model under CUPS but now each job that is sent immediately becomes 'Stopped'.
What do I need to get this working?
Thanks
Bruce
I am trying to connect using LPD to an HP P1005 printer hosted on a windows computer.
I managed to connect to the printer and see documents arriving in the Windows print queue but they did not print out. I have changed to the correct printer model under CUPS but now each job that is sent immediately becomes 'Stopped'.
What do I need to get this working?
Thanks
Bruce
9
Installation and Upgrades / Error install zentyal printers
« on: May 25, 2011, 11:46:50 am »
Hi
I tried to upgrade the HPLIB driver to support HP P1005 printer in cups.
Cups still works but the integration with Zentyal Desktop has disappeared. If I go to Software Management the Zentyal Printers is available to install. When I try this I get :-
root command apt-get -qq --no-install-recommends --simulate install zentyal-printers failed. Error output: E: Package zentyal-printers has no installation candidate Command output: . Exit value: 100
How do I reconnect the dashboard to cups?
Thanks
I tried to upgrade the HPLIB driver to support HP P1005 printer in cups.
Cups still works but the integration with Zentyal Desktop has disappeared. If I go to Software Management the Zentyal Printers is available to install. When I try this I get :-
root command apt-get -qq --no-install-recommends --simulate install zentyal-printers failed. Error output: E: Package zentyal-printers has no installation candidate Command output: . Exit value: 100
How do I reconnect the dashboard to cups?
Thanks
10
Installation and Upgrades / Access Home folders for users
« on: April 26, 2011, 06:19:11 pm »
I have a PDC administrator account.
How do I get access to users home folders from a workstation?
I have a number of students and need to access their home folders during a lesson.
Any ideas?
Thanks
How do I get access to users home folders from a workstation?
I have a number of students and need to access their home folders during a lesson.
Any ideas?
Thanks
11
Installation and Upgrades / PHP5 and MYSQL
« on: April 11, 2011, 06:01:10 pm »
How do I configure Apache to recognise PHP and MYSQL.
I have installed php with apt-get but every php page opened on the website
tries to download instead of execute.
Thanks
Bruce
I have installed php with apt-get but every php page opened on the website
tries to download instead of execute.
Thanks
Bruce
Pages: [1]