Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
31
Spanish / Error al instalar el módulo zentyal-samba 3.0.6
« on: October 29, 2012, 06:31:00 pm »
Tenía configurado, aunque no operativo el módulo de Samba para 3.0. Como tenía problemas pensé en actualizarlo a la última versión.
Tras el intento de actualización ya directamente no tengo acceso al mismo. Obtengo los siguientes errores:
En la sección de componentes de Zentyal, obtengo el mensaje que se ve en el pantallazo.
He ejecutado el comando "sudo dpkg --configure -a", pero sin éxito. Tras ejecutar el mismo obtengo los errores que se observa en el segundo pantallazo.
Tras el intento de actualización ya directamente no tengo acceso al mismo. Obtengo los siguientes errores:
En la sección de componentes de Zentyal, obtengo el mensaje que se ve en el pantallazo.
He ejecutado el comando "sudo dpkg --configure -a", pero sin éxito. Tras ejecutar el mismo obtengo los errores que se observa en el segundo pantallazo.
32
Installation and Upgrades / Re: [SOLVED] The proxy does not access the web page that matches the AD domain name
« on: October 19, 2012, 02:03:25 pm »
I had tried the forwarder but without success.
Thanks.
Thanks.
33
Spanish / Re: Zentyal 3.0 - Proxy - Problema con carga de imágenes en el navegador
« on: October 19, 2012, 01:28:17 pm »
Después de probar muchas cosas, finalmente lo he solventado de una forma poco elegante y que no me gusta mucho, pero no quería perder más tiempo con este tema.
Modificando el fichero /etc/hosts y añadiendo las ips y direcciones directamente.
Con esto ya se accede correctamente a la web corporativa a través del proxy.
Gracias.
Modificando el fichero /etc/hosts y añadiendo las ips y direcciones directamente.
Con esto ya se accede correctamente a la web corporativa a través del proxy.
Gracias.
34
Installation and Upgrades / Re: [SOLVED] The proxy does not access the web page that matches the AD domain name
« on: October 18, 2012, 08:02:53 pm »
I have an AD structure with several sites and subnets.
In principle one of the two internal DNS would be sufficient, but for the redundancy placed another
I do not know how to perform in Zentyal you mention the subject to
"Did you try to use forwarder first, forwarding to these DNS ?
Thanks for the support and interesting.
In principle one of the two internal DNS would be sufficient, but for the redundancy placed another
I do not know how to perform in Zentyal you mention the subject to
"Did you try to use forwarder first, forwarding to these DNS ?
Thanks for the support and interesting.
35
Spanish / Re: [SOLUCIONADO]proxy no accede a página web, que coincide con nombre del dominio
« on: October 18, 2012, 07:40:44 pm »
Después de probar muchas cosas, finalmente lo he solventado de una forma poco elegante y que no me gusta mucho, pero no quería perder más tiempo con este tema.
Modificando el fichero /etc/hosts y añadiendo las ips y direcciones directamente.
Con esto ya se accede correctamente a la web corporativa a través del proxy.
Gracias.
Modificando el fichero /etc/hosts y añadiendo las ips y direcciones directamente.
Con esto ya se accede correctamente a la web corporativa a través del proxy.
Gracias.
36
Installation and Upgrades / Re: The proxy does not access the web page that matches the AD domain name
« on: October 18, 2012, 05:16:59 pm »
I tried to do what he says, but without success. Possibly not knowing interpret what you say
At Core->Network->DNS, have the DNS showed at the screenshoot. The second and third are internal DNS and the other are DNS's Google.
I tried with transparent proxy and with not transparent proxy. Neither option worked.
I eventually got the goal, but not the way I wanted.
I had to modify the / etc / hosts and deal directly with the ips of the domains and subdomains mydomain.com to access them correctly through the proxy.
Thank you very much for all the trouble
At Core->Network->DNS, have the DNS showed at the screenshoot. The second and third are internal DNS and the other are DNS's Google.
I tried with transparent proxy and with not transparent proxy. Neither option worked.
I eventually got the goal, but not the way I wanted.
I had to modify the / etc / hosts and deal directly with the ips of the domains and subdomains mydomain.com to access them correctly through the proxy.
Thank you very much for all the trouble
37
Installation and Upgrades / Re: The proxy does not access the web page that matches the AD domain name
« on: October 18, 2012, 02:34:24 pm »
Ok, about the merge of the two posts.
Do not quite understand the answer. I'm a Spanish user, and my English is basic. Can you tell me based on the screenshots, in what menu options Zentyal configuration, I have to change something?
Core -> Network ?
Infrastructure -> DNS?
Do not quite understand the answer. I'm a Spanish user, and my English is basic. Can you tell me based on the screenshots, in what menu options Zentyal configuration, I have to change something?
Core -> Network ?
Infrastructure -> DNS?
38
Installation and Upgrades / The proxy does not access the web page that matches the AD domain name
« on: October 18, 2012, 01:43:18 pm »
Staking the question because I think I did very adequately in the other post.
I mounted a Zentyal 3.0
The issue is that the proxy works fine except when I try to access www.midominio.com or subdomains thereof, whose domain is the one I have in AD.
I had mounted a proxy version 2.2 and did not have this problem. I think the issue is that at the level of modules, the module-dependent Proxy and Firewall users and groups, and the users and groups depends in turn on-DNS and NTP-
The case is now Zentyal to be operating the Proxy module, you install the DNS module, and I think that's where the problem lies.
In DNS settings, I have the AD domain that I have in the company, and I think when you search the proxy, interprets the location is internal and not have to search it out, and therefore not accessible.
The web page midominio.com is in a external hosting.
My question is how to tell Zentyal, that accesses the searching www.midominio.com abroad and not internally.
Annex two screenshots below the entry created in Infrastructure-> DNS, and one with the error I get when I try to go to the corporate site.
I hope I have made clear the query.
regards
I mounted a Zentyal 3.0
The issue is that the proxy works fine except when I try to access www.midominio.com or subdomains thereof, whose domain is the one I have in AD.
I had mounted a proxy version 2.2 and did not have this problem. I think the issue is that at the level of modules, the module-dependent Proxy and Firewall users and groups, and the users and groups depends in turn on-DNS and NTP-
The case is now Zentyal to be operating the Proxy module, you install the DNS module, and I think that's where the problem lies.
In DNS settings, I have the AD domain that I have in the company, and I think when you search the proxy, interprets the location is internal and not have to search it out, and therefore not accessible.
The web page midominio.com is in a external hosting.
My question is how to tell Zentyal, that accesses the searching www.midominio.com abroad and not internally.
Annex two screenshots below the entry created in Infrastructure-> DNS, and one with the error I get when I try to go to the corporate site.
I hope I have made clear the query.
regards
39
Spanish / [SOLUCIONADO]proxy no accede a página web, que coincide con nombre del dominio
« on: October 18, 2012, 01:34:23 pm »
Replanteo la pregunta ya que creo que no lo hice de forma muy adecuada en el otro post.
He montado un Zentyal 3.0
El tema es que el proxy funciona perfectamente excepto cuando intento acceder a www.midominio.com o subdominios del mismo, cuyo dominio es el que tengo en AD.
Yo tenía un proxy montado en versión 2.2 y no tenía esta problemática. Creo que el tema viene porque a nivel de módulos, el módulo del Proxy depende de -Cortafuegos y usuarios y grupos-, y el de usuarios y grupos depende a su vez de -DNS y NTP-
El caso es que ahora Zentyal, para tener operativo el módulo del Proxy, te instala el módulo del DNS, y ahí es donde creo que radica la problemática.
En la configuración de DNS, tengo el dominio de AD que dispongo en la empresa, y creo que cuando el proxy realiza una búsqueda, interpreta que la localización es interna y no tiene que buscarla fuera, y por tanto no accede.
La página web midominio.com está en un hosting externo, ni en la Intrantet, ni en la DMZ.
Mi pregunta es como decirle a Zentyal, que para los accesos a www.midominio.com realice la consulta en el exterior y no internamente, donde evidentemente no lo encuentra.
A continuación anexo dos pantallazos con la entrada creada en Infrastructure->DNS, y otra con el error que obtengo cuando intento entrar a la página corporativa.
Espero haber realizado la consulta con claridad.
Saludos
He montado un Zentyal 3.0
El tema es que el proxy funciona perfectamente excepto cuando intento acceder a www.midominio.com o subdominios del mismo, cuyo dominio es el que tengo en AD.
Yo tenía un proxy montado en versión 2.2 y no tenía esta problemática. Creo que el tema viene porque a nivel de módulos, el módulo del Proxy depende de -Cortafuegos y usuarios y grupos-, y el de usuarios y grupos depende a su vez de -DNS y NTP-
El caso es que ahora Zentyal, para tener operativo el módulo del Proxy, te instala el módulo del DNS, y ahí es donde creo que radica la problemática.
En la configuración de DNS, tengo el dominio de AD que dispongo en la empresa, y creo que cuando el proxy realiza una búsqueda, interpreta que la localización es interna y no tiene que buscarla fuera, y por tanto no accede.
La página web midominio.com está en un hosting externo, ni en la Intrantet, ni en la DMZ.
Mi pregunta es como decirle a Zentyal, que para los accesos a www.midominio.com realice la consulta en el exterior y no internamente, donde evidentemente no lo encuentra.
A continuación anexo dos pantallazos con la entrada creada en Infrastructure->DNS, y otra con el error que obtengo cuando intento entrar a la página corporativa.
Espero haber realizado la consulta con claridad.
Saludos
40
Spanish / Re: Zentyal 3.0 - Proxy - Problema con carga de imágenes en el navegador
« on: October 17, 2012, 06:47:45 pm »
Añado pantallazo del error que encuentro en algunos de los contenidos de la página web corporativa que no se muestran, por si pudiera aclarar algo más el tema.
Gracias..
Gracias..
41
Installation and Upgrades / Re: Proxy problem with Zentyal 3.0 and corporate web page
« on: October 17, 2012, 06:08:11 pm »
The squid log of the problem is the next:
GET 23,740 TCP_MISS/503 http://media.mydomain.com
And I guess that is the problem of name matching between the domain name of the AD, created in Infrastructure-> DNS and a domain hosted on external hosting, but it's not sure.
I don't know where to do the next. I don't see the option at Infrastructure->DNS
I attached a file with that error I obtain at several links, when I enter the domain mydomain.com, that`s the same of Active Directory domain, and of the Infrastructure->DNS
Thanks to the problem support
GET 23,740 TCP_MISS/503 http://media.mydomain.com
And I guess that is the problem of name matching between the domain name of the AD, created in Infrastructure-> DNS and a domain hosted on external hosting, but it's not sure.
I don't know where to do the next. I don't see the option at Infrastructure->DNS
Quote
- or you describe external servers in Zentyal DNS
I attached a file with that error I obtain at several links, when I enter the domain mydomain.com, that`s the same of Active Directory domain, and of the Infrastructure->DNS
Thanks to the problem support
42
Installation and Upgrades / Re: Proxy problem with Zentyal 3.0 and corporate web page
« on: October 17, 2012, 04:31:54 pm »Quote
This is qa bit clearer now. Let me rephrase it:
you are using same domain name for internal and external domain. Because of this, what you describe in Zentyal DNS covers internal machines but does not cover external ones. Am I correct ?
It's absolutaly correct
Quote
So you have 2 choices:
- either you change internal domain name for something different
- or you describe external servers in Zentyal DNS
With the first choice there is a problem. If you see the attached file, the domain isn't possible to change. Not allowed to change or to delete.
And with the second choice, i aren't sure about if you mean at Network-> DNS and there to add the external DNS -I attached file about it- or it's other thing.
I try this last option and the result is the same.
43
Installation and Upgrades / Re: Proxy problem with Zentyal 3.0 and corporate web page
« on: October 17, 2012, 03:29:18 pm »
Clearly, I had to explain very badly, to create so much confusion.
Sorry.
The problem only occurs in Zentyal 3.0, I have another proxy with Zentyal 2.2 and does not occur.
This is because in Zentyal 3.0 Proxy module depends on the Users and Groups, and this in turn the DNS, which has not happened in Zentyal 2.2
The problem is that in Infrastructure->DNS, I have mydomain.com and that domain, I can not access to navigate, which is in an external hosting.
To the other domains haven't problems, only at the domain to appear Infrastructure->DNS
Thanks in advance.
Sorry.
The problem only occurs in Zentyal 3.0, I have another proxy with Zentyal 2.2 and does not occur.
This is because in Zentyal 3.0 Proxy module depends on the Users and Groups, and this in turn the DNS, which has not happened in Zentyal 2.2
The problem is that in Infrastructure->DNS, I have mydomain.com and that domain, I can not access to navigate, which is in an external hosting.
To the other domains haven't problems, only at the domain to appear Infrastructure->DNS
Thanks in advance.
44
Installation and Upgrades / Re: Proxy problem with Zentyal 3.0 and corporate web page
« on: October 17, 2012, 02:25:10 pm »
I try to clarify the issue somewhat.
When I put dominio_grupo, I mean not a real address, but to my company's corporate governance
The problem is that in Infrastructure-> DNS, I have assigned the DNS domain, and I think it makes the search internally.
I attached image of the DNS configuration where is added automatically and is the domain to which I have no access from the proxy.
I added the proxy exclusion, but to no avail.
Thanks in advance...
When I put dominio_grupo, I mean not a real address, but to my company's corporate governance
The problem is that in Infrastructure-> DNS, I have assigned the DNS domain, and I think it makes the search internally.
I attached image of the DNS configuration where is added automatically and is the domain to which I have no access from the proxy.
I added the proxy exclusion, but to no avail.
Thanks in advance...
45
Installation and Upgrades / [SOLVED] The proxy does not access the web page that matches the AD domain name
« on: October 17, 2012, 12:23:13 pm »
Hi.
I have a problem with the access of the corporate web page.
In the file / var/log/squid3/access.log observe the following type lines that I believe show me a picture blocks access to a certain group companies websites:
GET 23,740 TCP_MISS/503 http://media.dominio_grupo.com
I think I get one of these errors in the log, for each resource to which access attempts and fails.
The issue is that the graphics capabilities of the companies websites, make references to a subdomain of the group's corporate website.
That is www.empresa1.com has graphic content that call media.dominio_grupo.com
And the issue is that when loading the DNS, domain appears to me: dominio_grupo.com
Overall I think it is trying to access internally and not go out to search the contents of media.dominio_grupo.com
Or put more simply, since I can not access proxy www.dominio_grupo.com that I have posted on an external host.
How I can force to try to leave it out to access the site in question, whose name matches the domain defined in the DNS?
I hope I explained.
I have a problem with the access of the corporate web page.
In the file / var/log/squid3/access.log observe the following type lines that I believe show me a picture blocks access to a certain group companies websites:
GET 23,740 TCP_MISS/503 http://media.dominio_grupo.com
I think I get one of these errors in the log, for each resource to which access attempts and fails.
The issue is that the graphics capabilities of the companies websites, make references to a subdomain of the group's corporate website.
That is www.empresa1.com has graphic content that call media.dominio_grupo.com
And the issue is that when loading the DNS, domain appears to me: dominio_grupo.com
Overall I think it is trying to access internally and not go out to search the contents of media.dominio_grupo.com
Or put more simply, since I can not access proxy www.dominio_grupo.com that I have posted on an external host.
How I can force to try to leave it out to access the site in question, whose name matches the domain defined in the DNS?
I hope I explained.