Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - n4than

Pages: [1] 2
Installation and Upgrades / Zentyal backup config from ssh
« on: April 04, 2011, 12:40:41 pm »
Hi to everybody,
I'd like to know how I can make a complete and ready-to-run backup of all the config files from ssh.
I'd like to know in case of any strange problems about web interface.
I just need to copy all the files from /etc/ebox and from /var/lib/ebox/conf/ ?

Please need your help.

Installation and Upgrades / Block p2p
« on: February 21, 2011, 04:41:41 pm »
Hi to all,
can someone show me the steps  to conifgure zentyal for a basic p2p filter propouse box ?
Can We have to use the Http proxy ?

THX for all.

Installation and Upgrades / Re: Ebox 1.4 and WAN FailOver Big Problem
« on: February 01, 2011, 01:45:47 pm »
Can someone helps me to understand if I have to set the same weight to the two gateway, if I have to set one of them as default or I have to leave both as not-default?

Installation and Upgrades / Re: Ebox 1.4 and WAN FailOver Big Problem
« on: February 01, 2011, 01:06:05 pm »
Thank you for your reply.
I cannot turn off in order to upgrade to the last version  because it's  a production server.
Can I upgrade without shutdown all the services ?

nobody needs to turn up management option in openvpn config?
Can I belive this?Really ?

seems like ebox ignore the postset about vpn.

thanks for your reply.
I've follow your tips, but it don't work.
I use ebox1.4 and this is my config

ls -la
total 44
drwxr-xr-x 2 root root  4096 2011-01-25 12:22 .
drwxr-xr-x 5 root root  4096 2011-01-24 10:07 ..
-rwxr-xr-x 1 root root   371 2010-03-06 13:32 firewall.postservice
-rwxr-xr-x 1 root root   205 2011-01-25 11:51 openvpn.postsetconf
-rw-r--r-- 1 root root 12288 2011-01-25 11:57 .openvpn.postsetconf.swp
-rwxr-xr-x 1 root root   534 2010-06-20 16:52 template.postservice
-rwxr-xr-x 1 root root   418 2010-06-20 16:52 template.postsetconf
-rwxr-xr-x 1 root root   533 2010-06-20 16:52 template.preservice
-rwxr-xr-x 1 root root   418 2010-06-20 16:52 template.presetconf

echo "management 7505" >> $server1
echo "management 7506" >> $server2

Installation and Upgrades / Re: WAN Failover doesn't work as expected.
« on: January 24, 2011, 10:21:27 am »
OK, just to avoid confusion:

I am running ebox (core) 2.0.5 and ebox-network 2.0.4

Thanks again for the fix!

Hi , can you show me the steps to make it run ? I'm in trouble with wan failover service, because when the first default gw goes down, it will never getup .

Hi to all, I need to set up the management option in openvpn server configurations, in order to monitor the status.
I have 2 WAN Interface with 2 different static ip, and I need to configure 2 different management option for each server configuration files.

So I try to edit

sudo vim /usr/share/ebox/stubs/openvpn/openvpn.conf.mas

and insert the line management 7505

If I use only one openvpn server everything goes well, but when I set-on the second one, this one never start because it cannot bind the port 7505 'cause it was used in the first configuration.

How can I edit every openvpn server configuration in order to set differents option on both ?
I need to insert the option management 7505 for the first server and
management 7510 for the second server.

Thank to all.

Installation and Upgrades / Re: Access router behind ebox firewall
« on: January 19, 2011, 08:45:38 pm »
I work it out.
I exposed the lan in VPN and everything is ok .
thanks to all

Installation and Upgrades / Re: Ebox 1.4 and WAN FailOver Big Problem
« on: January 19, 2011, 08:44:25 pm »
this is a black room problem!
when My first gateway when down it will never come as default!
Can somebody from the stuff helps us ?

Installation and Upgrades / Ebox 1.4 and WAN FailOver Big Problem
« on: January 18, 2011, 04:55:58 pm »
Hi to all,
I have been working for 2 day about WAN Failover service.
My server is ebox 1.4 and this is my network topology

ETH0 -> a.a.a.a First Gateway Static IP
ETH1 -> b.b.b.b/24 Office LAn
ETH2 -> c.c.c.c Secondary Gateway with Static IP

I have two gateway, the first with weight 10 set as default and the second with weight 2 set as not default.

The WANFailover rules are

each time : 60seconds
ping to host :
number of probes : 5
ratio success : 20%

Balance Traffic set to off ,but with a multi-gateway rule for any kind of protocoll to the first gateway.

Well, when I try to unplugged the first gateway, the system switch to the second gateway and everything goes up right and the second gateway turn to default.
But When I plugged again the first gateway, nothing change, and the secondary gateway still remain the default gateway.

Please help me.
Thank you

I, did you solve your problem ?
I have the same problem with the wan failover service and ebox 1.4.
When the first gw goes down, it will never turn up.
These are my wan failover rules

Intervall : 60s
Ping to host :
Success ratio : 20%

balance traffic is turn off but I have a rule from any to any for the first gateway.
Can someone helps me ?

Installation and Upgrades / Re: Access router behind ebox firewall
« on: January 17, 2011, 11:42:31 pm »
Thank you again for your reply.
these are my firewall rules for internal networks

Source Any
Destination Any
Service Any

but with no luck , I cannot access the web administrator page of my wan router.
I removed all static routes and port forward.

Installation and Upgrades / Re: Access router behind ebox firewall
« on: January 17, 2011, 06:22:00 pm »
Thank you for your fast reply.
I don't use any HTTP Proxy. I have been trying with some ssh tunnel trick but always with no luck

Pages: [1] 2