Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
1
Installation and Upgrades / Zentyal backup config from ssh
« on: April 04, 2011, 12:40:41 pm »
Hi to everybody,
I'd like to know how I can make a complete and ready-to-run backup of all the config files from ssh.
I'd like to know in case of any strange problems about web interface.
I just need to copy all the files from /etc/ebox and from /var/lib/ebox/conf/ ?
Please need your help.
I'd like to know how I can make a complete and ready-to-run backup of all the config files from ssh.
I'd like to know in case of any strange problems about web interface.
I just need to copy all the files from /etc/ebox and from /var/lib/ebox/conf/ ?
Please need your help.
2
Installation and Upgrades / Block p2p
« on: February 21, 2011, 04:41:41 pm »
Hi to all,
can someone show me the steps to conifgure zentyal for a basic p2p filter propouse box ?
Can We have to use the Http proxy ?
THX for all.
can someone show me the steps to conifgure zentyal for a basic p2p filter propouse box ?
Can We have to use the Http proxy ?
THX for all.
3
Installation and Upgrades / Re: Ebox 1.4 and WAN FailOver Big Problem
« on: February 01, 2011, 01:45:47 pm »
Can someone helps me to understand if I have to set the same weight to the two gateway, if I have to set one of them as default or I have to leave both as not-default?
4
Installation and Upgrades / Re: Ebox 1.4 and WAN FailOver Big Problem
« on: February 01, 2011, 01:06:05 pm »
Thank you for your reply.
I cannot turn off in order to upgrade to the last version because it's a production server.
Can I upgrade without shutdown all the services ?
I cannot turn off in order to upgrade to the last version because it's a production server.
Can I upgrade without shutdown all the services ?
5
Installation and Upgrades / Re: Openvpn and management option to monitor status
« on: January 28, 2011, 02:55:05 pm »
nobody needs to turn up management option in openvpn config?
Can I belive this?Really ?
Can I belive this?Really ?
6
Installation and Upgrades / Re: Openvpn and management option to monitor status
« on: January 25, 2011, 12:28:29 pm »
seems like ebox ignore the postset about vpn.
7
Installation and Upgrades / Re: Openvpn and management option to monitor status
« on: January 25, 2011, 12:25:24 pm »
thanks for your reply.
I've follow your tips, but it don't work.
I use ebox1.4 and this is my config
ls -la
total 44
drwxr-xr-x 2 root root 4096 2011-01-25 12:22 .
drwxr-xr-x 5 root root 4096 2011-01-24 10:07 ..
-rwxr-xr-x 1 root root 371 2010-03-06 13:32 firewall.postservice
-rwxr-xr-x 1 root root 205 2011-01-25 11:51 openvpn.postsetconf
-rw-r--r-- 1 root root 12288 2011-01-25 11:57 .openvpn.postsetconf.swp
-rwxr-xr-x 1 root root 534 2010-06-20 16:52 template.postservice
-rwxr-xr-x 1 root root 418 2010-06-20 16:52 template.postsetconf
-rwxr-xr-x 1 root root 533 2010-06-20 16:52 template.preservice
-rwxr-xr-x 1 root root 418 2010-06-20 16:52 template.presetconf
#!/bin/sh
server1=/etc/openvpn/MolitoriaSanPaolo.conf
server2=/etc/openvpn/MolitoriaSanPaolo_Medianet.conf
echo "management 192.168.2.250 7505" >> $server1
echo "management 192.168.2.250 7506" >> $server2
I've follow your tips, but it don't work.
I use ebox1.4 and this is my config
ls -la
total 44
drwxr-xr-x 2 root root 4096 2011-01-25 12:22 .
drwxr-xr-x 5 root root 4096 2011-01-24 10:07 ..
-rwxr-xr-x 1 root root 371 2010-03-06 13:32 firewall.postservice
-rwxr-xr-x 1 root root 205 2011-01-25 11:51 openvpn.postsetconf
-rw-r--r-- 1 root root 12288 2011-01-25 11:57 .openvpn.postsetconf.swp
-rwxr-xr-x 1 root root 534 2010-06-20 16:52 template.postservice
-rwxr-xr-x 1 root root 418 2010-06-20 16:52 template.postsetconf
-rwxr-xr-x 1 root root 533 2010-06-20 16:52 template.preservice
-rwxr-xr-x 1 root root 418 2010-06-20 16:52 template.presetconf
#!/bin/sh
server1=/etc/openvpn/MolitoriaSanPaolo.conf
server2=/etc/openvpn/MolitoriaSanPaolo_Medianet.conf
echo "management 192.168.2.250 7505" >> $server1
echo "management 192.168.2.250 7506" >> $server2
8
Installation and Upgrades / Re: WAN Failover doesn't work as expected.
« on: January 24, 2011, 10:21:27 am »OK, just to avoid confusion:
I am running ebox (core) 2.0.5 and ebox-network 2.0.4
Thanks again for the fix!
Hi , can you show me the steps to make it run ? I'm in trouble with wan failover service, because when the first default gw goes down, it will never getup .
Thanks
9
Installation and Upgrades / Openvpn and management option to monitor status
« on: January 24, 2011, 09:57:23 am »
Hi to all, I need to set up the management option in openvpn server configurations, in order to monitor the status.
I have 2 WAN Interface with 2 different static ip, and I need to configure 2 different management option for each server configuration files.
So I try to edit
sudo vim /usr/share/ebox/stubs/openvpn/openvpn.conf.mas
and insert the line management 192.168.2.250 7505
If I use only one openvpn server everything goes well, but when I set-on the second one, this one never start because it cannot bind the port 7505 'cause it was used in the first configuration.
How can I edit every openvpn server configuration in order to set differents option on both ?
I need to insert the option management 192.168.2.250 7505 for the first server and
management 192.168.2.250 7510 for the second server.
Thank to all.
I have 2 WAN Interface with 2 different static ip, and I need to configure 2 different management option for each server configuration files.
So I try to edit
sudo vim /usr/share/ebox/stubs/openvpn/openvpn.conf.mas
and insert the line management 192.168.2.250 7505
If I use only one openvpn server everything goes well, but when I set-on the second one, this one never start because it cannot bind the port 7505 'cause it was used in the first configuration.
How can I edit every openvpn server configuration in order to set differents option on both ?
I need to insert the option management 192.168.2.250 7505 for the first server and
management 192.168.2.250 7510 for the second server.
Thank to all.
10
Installation and Upgrades / Re: Access router behind ebox firewall
« on: January 19, 2011, 08:45:38 pm »
I work it out.
I exposed the lan in VPN and everything is ok .
thanks to all
I exposed the lan in VPN and everything is ok .
thanks to all
11
Installation and Upgrades / Re: Ebox 1.4 and WAN FailOver Big Problem
« on: January 19, 2011, 08:44:25 pm »
this is a black room problem!
when My first gateway when down it will never come as default!
Can somebody from the stuff helps us ?
when My first gateway when down it will never come as default!
Can somebody from the stuff helps us ?
12
Installation and Upgrades / Ebox 1.4 and WAN FailOver Big Problem
« on: January 18, 2011, 04:55:58 pm »
Hi to all,
I have been working for 2 day about WAN Failover service.
My server is ebox 1.4 and this is my network topology
ETH0 -> a.a.a.a First Gateway Static IP
ETH1 -> b.b.b.b/24 Office LAn
ETH2 -> c.c.c.c Secondary Gateway with Static IP
I have two gateway, the first with weight 10 set as default and the second with weight 2 set as not default.
The WANFailover rules are
each time : 60seconds
ping to host :
number of probes : 5
ratio success : 20%
Balance Traffic set to off ,but with a multi-gateway rule for any kind of protocoll to the first gateway.
Well, when I try to unplugged the first gateway, the system switch to the second gateway and everything goes up right and the second gateway turn to default.
But When I plugged again the first gateway, nothing change, and the secondary gateway still remain the default gateway.
Please help me.
Thank you
I have been working for 2 day about WAN Failover service.
My server is ebox 1.4 and this is my network topology
ETH0 -> a.a.a.a First Gateway Static IP
ETH1 -> b.b.b.b/24 Office LAn
ETH2 -> c.c.c.c Secondary Gateway with Static IP
I have two gateway, the first with weight 10 set as default and the second with weight 2 set as not default.
The WANFailover rules are
each time : 60seconds
ping to host :
number of probes : 5
ratio success : 20%
Balance Traffic set to off ,but with a multi-gateway rule for any kind of protocoll to the first gateway.
Well, when I try to unplugged the first gateway, the system switch to the second gateway and everything goes up right and the second gateway turn to default.
But When I plugged again the first gateway, nothing change, and the secondary gateway still remain the default gateway.
Please help me.
Thank you
13
Installation and Upgrades / Re: [SOLVED] WAN Failover service doesn't work
« on: January 18, 2011, 04:13:02 pm »
I, did you solve your problem ?
I have the same problem with the wan failover service and ebox 1.4.
When the first gw goes down, it will never turn up.
These are my wan failover rules
Intervall : 60s
Ping to host : www.google.com
Success ratio : 20%
balance traffic is turn off but I have a rule from any to any for the first gateway.
Can someone helps me ?
I have the same problem with the wan failover service and ebox 1.4.
When the first gw goes down, it will never turn up.
These are my wan failover rules
Intervall : 60s
Ping to host : www.google.com
Success ratio : 20%
balance traffic is turn off but I have a rule from any to any for the first gateway.
Can someone helps me ?
14
Installation and Upgrades / Re: Access router behind ebox firewall
« on: January 17, 2011, 11:42:31 pm »
Thank you again for your reply.
these are my firewall rules for internal networks
ACCEPT
Source Any
Destination Any
Service Any
but with no luck , I cannot access the web administrator page of my wan router.
I removed all static routes and port forward.
these are my firewall rules for internal networks
ACCEPT
Source Any
Destination Any
Service Any
but with no luck , I cannot access the web administrator page of my wan router.
I removed all static routes and port forward.
15
Installation and Upgrades / Re: Access router behind ebox firewall
« on: January 17, 2011, 06:22:00 pm »
Thank you for your fast reply.
I don't use any HTTP Proxy. I have been trying with some ssh tunnel trick but always with no luck
I don't use any HTTP Proxy. I have been trying with some ssh tunnel trick but always with no luck
Pages: [1] 2