This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / SNAT configuration
« on: September 29, 2015, 12:11:36 pm »
Our FAI have routed 5 IP public adress (80.xx.xx.xx) to our Wan IP adress (200.xx.xx.xx)
200.xx.xx.xx is the Wan interface of zentyal (eth0) where arrive the 5 public adress
We want all communication to one IP of the range 80.xx.xx.xx be transfered to the same machine with IP 192.168.0.1 (for exemple)
Port forwarding is not a solutions as the required port is already forwarded.
I try to Configured SNAT diffrent way, but none of them work.
Is the SNAT menu the right way to do it?
How to configure it?
Regards
200.xx.xx.xx is the Wan interface of zentyal (eth0) where arrive the 5 public adress
We want all communication to one IP of the range 80.xx.xx.xx be transfered to the same machine with IP 192.168.0.1 (for exemple)
Port forwarding is not a solutions as the required port is already forwarded.
I try to Configured SNAT diffrent way, but none of them work.
Is the SNAT menu the right way to do it?
How to configure it?
Regards
2
French / Créer serveur à l'identique
« on: February 05, 2015, 05:27:12 pm »
Pour récupérer le backup d'un serveur qui ne démarre plus, j'ai reconstruit un nouveau serveur à partir d'un disque iso.
l'installation de tous les modules c'est bien passé.
Je tente d'abord de restorer un backup à partir du cloud zentyal, mais j'ai systématiquement l'erreur "the following module present in the backup are not installed: haproxy ips webadmin. you need to install them before"
Je ne comprend pas bien, vu que tous les modules zentyal sont installés.
ou alors me suis-je trompé de version de zentyal pourtant les GUI sont identique?
l'installation de tous les modules c'est bien passé.
Je tente d'abord de restorer un backup à partir du cloud zentyal, mais j'ai systématiquement l'erreur "the following module present in the backup are not installed: haproxy ips webadmin. you need to install them before"
Je ne comprend pas bien, vu que tous les modules zentyal sont installés.
ou alors me suis-je trompé de version de zentyal pourtant les GUI sont identique?
3
French / Récupérer config suite crash disque dur
« on: February 05, 2015, 05:08:54 pm »
Bonjour,
J'ai un gros soucis d'authentification sur mon zentyal 2.2.
En local je ne peux pas aller plus loin que la page de login.
Via un browser j'ai un message d'erreur qui me dis que le serveur n'est pas disponible
mais j'arrive à me connecter un ssh.
Peut on espérer redémarer ce serveur convenablement en re installant certain services et lesquelles?
Mes connaissance informatique étant limité, je ne sais pas par ou commencer
merci de votre aide
J'ai un gros soucis d'authentification sur mon zentyal 2.2.
En local je ne peux pas aller plus loin que la page de login.
Via un browser j'ai un message d'erreur qui me dis que le serveur n'est pas disponible
mais j'arrive à me connecter un ssh.
Peut on espérer redémarer ce serveur convenablement en re installant certain services et lesquelles?
Mes connaissance informatique étant limité, je ne sais pas par ou commencer
merci de votre aide
4
Installation and Upgrades / Re: Zentyal 4.0 cant resolve nome of local machines
« on: November 21, 2014, 04:04:22 pm »
In DNS menu I have create a domaine XXXX.lan with all my IP fixed machines of my lan
System > General > domain : XXXX.lan
Network > DNS : XXXX.lan
Is there something else to config
System > General > domain : XXXX.lan
Network > DNS : XXXX.lan
Is there something else to config
5
Installation and Upgrades / Zentyal 4.0 cant resolve nome of local machines
« on: November 20, 2014, 01:24:35 pm »
I have one zentyal 3.4 running fine as Gateway-DHCP-DNS
I am trying to config a second Zentyal (4.0) the same way. In this second zentyal we are using 3NIC.
- eth0 is WAN
- eth1 is LAN
- eth2 is LAN
DHCP and DNS is used for LAN on eth1
The gateway and DHCP are running fine. I can access intenet without problem.
But i cant ping an other machine on my local LAN. I got the error message: ping: cannot resolve jobs: Unknown host
any suggestion ?
thanks
I am trying to config a second Zentyal (4.0) the same way. In this second zentyal we are using 3NIC.
- eth0 is WAN
- eth1 is LAN
- eth2 is LAN
DHCP and DNS is used for LAN on eth1
The gateway and DHCP are running fine. I can access intenet without problem.
But i cant ping an other machine on my local LAN. I got the error message: ping: cannot resolve jobs: Unknown host
any suggestion ?
thanks
6
Installation and Upgrades / Re: Zentyal stop working every morning
« on: November 04, 2013, 12:20:15 pm »
I arrive at the same conclusion.
Our server memory is too short
Regarding the spam stuff we will move them to another server with a different IP
Thanks everybody for your help
Our server memory is too short
Regarding the spam stuff we will move them to another server with a different IP
Thanks everybody for your help
7
Installation and Upgrades / Re: Zentyal stop working every morning
« on: November 01, 2013, 06:17:08 pm »
Around 03PM, zentyal high activity reduced to the normal.
I can connect to it in ssh and with a browser normally.
the local GUI also work normally.
Top command no more shows duplicity activity.
Is duplicity the backup service as i understand?
zentyal start its backup at 2am, when the high activity start.
but why duplicity stop working at 3pm whereas zentyal log said ZEntyal incremental backup succeedded at 06:40am
and in any case this can't explain why my server was blacklisted as spam server?
I can connect to it in ssh and with a browser normally.
the local GUI also work normally.
Top command no more shows duplicity activity.
Is duplicity the backup service as i understand?
zentyal start its backup at 2am, when the high activity start.
but why duplicity stop working at 3pm whereas zentyal log said ZEntyal incremental backup succeedded at 06:40am
and in any case this can't explain why my server was blacklisted as spam server?
8
Installation and Upgrades / Re: Zentyal stop working every morning
« on: November 01, 2013, 02:14:19 pm »
And this is the jnettop printscreen
192.168.0.11 is our ftp server (i was obliged to reconnect it, for our costumers)
192.168.0.249 is my notebook
192.168.0.251 is zentyal
Nothing very heavy
192.168.0.11 is our ftp server (i was obliged to reconnect it, for our costumers)
192.168.0.249 is my notebook
192.168.0.251 is zentyal
Nothing very heavy
9
Installation and Upgrades / Re: Zentyal stop working every morning
« on: November 01, 2013, 12:43:26 pm »
Thanks for your comments
Zentyal is our gateway and MTA.
we only have one IP adresse
Today is a national holliday and office is closed. exepte for me.
At 8Am when i arrived zentyal was as usualy bloqued/freeze.
after 2 hours trying to connect with ssh or with abrowser, i got a ssh connection but very slow.
type top commande see attachments
I notice duplicity is taking a lot of memorry, dont know what it is.
GUI cames alive, i can move the mouse, but can't access zentyal interface
ssh connection steel very slow
AS i am alone, i disconnect my zentyal LAN and connect directly my macbook.
like that, I am the only one client of Zentyal.
And unfortunatly Zentyal steel high loaded.
ssh connection is difficult (i have to fait a long time before being connected)
No access by browser connection
Can't lauch zentyal interface localy
One thing is running, i have access to internet
Now i am trying to install jnettop
Zentyal is our gateway and MTA.
we only have one IP adresse
Today is a national holliday and office is closed. exepte for me.
At 8Am when i arrived zentyal was as usualy bloqued/freeze.
after 2 hours trying to connect with ssh or with abrowser, i got a ssh connection but very slow.
type top commande see attachments
I notice duplicity is taking a lot of memorry, dont know what it is.
GUI cames alive, i can move the mouse, but can't access zentyal interface
ssh connection steel very slow
AS i am alone, i disconnect my zentyal LAN and connect directly my macbook.
like that, I am the only one client of Zentyal.
And unfortunatly Zentyal steel high loaded.
ssh connection is difficult (i have to fait a long time before being connected)
No access by browser connection
Can't lauch zentyal interface localy
One thing is running, i have access to internet
Now i am trying to install jnettop
10
Installation and Upgrades / Re: Zentyal stop working every morning
« on: October 31, 2013, 07:41:59 pm »
Thanks Lonniebiz,
I'll check it next time.
Today exploring monitoring curves i fund that zentyal is very busy during the night
This strange high activity start at 2am and stop 8.30am when i reboot the system and it occured every night.
maybe it's a clue
Our server was blacklisted as a spamserver. Can zentyal send massive spam every night? How to check it?
I'll check it next time.
Today exploring monitoring curves i fund that zentyal is very busy during the night
This strange high activity start at 2am and stop 8.30am when i reboot the system and it occured every night.
maybe it's a clue
Our server was blacklisted as a spamserver. Can zentyal send massive spam every night? How to check it?
11
Installation and Upgrades / Re: Zentyal stop working every morning
« on: October 30, 2013, 12:02:08 pm »
Hi Christian,
Maybe I am not clear. try to resume.
Every morning it was as the network stop running (no access to internet, clients can't connect each other, no access to mail server) clients loose or can't get IP adresse.
Zentyal GUI is very slow ou freeze.
After the shutdown/start, clients retrieve an IP adresse can access internet or connect to other clients. All works exept Email server whereas on the GUI message was indicated as running. Restarting the message service on GUI doesn't fixe the problem.
It was like zarafat prevent dovecot running.
The only solution i fund is killing zarafat and restart dovecot.
While we don't reboot zentyal we don't have mail problem.
But as zarafat is stopped, can it cause the troubles we get in the morning?
Hope to be more clear.
Maybe I am not clear. try to resume.
Every morning it was as the network stop running (no access to internet, clients can't connect each other, no access to mail server) clients loose or can't get IP adresse.
Zentyal GUI is very slow ou freeze.
After the shutdown/start, clients retrieve an IP adresse can access internet or connect to other clients. All works exept Email server whereas on the GUI message was indicated as running. Restarting the message service on GUI doesn't fixe the problem.
It was like zarafat prevent dovecot running.
The only solution i fund is killing zarafat and restart dovecot.
While we don't reboot zentyal we don't have mail problem.
But as zarafat is stopped, can it cause the troubles we get in the morning?
Hope to be more clear.
12
Installation and Upgrades / Re: Zentyal stop working every morning
« on: October 30, 2013, 10:15:25 am »
When it appens, zentyal GUI is very slow or freeze.
I have to make a hard switch off.
Turn it on solve the problem but i have to kill zarafat and start dovecot service manually to get my Email running.
I am not sure both problems are linked.
I am not at my office now and will come back thursday and check crontab and zentyal log.
A problem with an equipment on the network steel possible, but how to find it, we have more than 200 clients on our network.
I have to make a hard switch off.
Turn it on solve the problem but i have to kill zarafat and start dovecot service manually to get my Email running.
I am not sure both problems are linked.
I am not at my office now and will come back thursday and check crontab and zentyal log.
A problem with an equipment on the network steel possible, but how to find it, we have more than 200 clients on our network.
13
Installation and Upgrades / [SOLVED] Zentyal stop working every morning
« on: October 29, 2013, 11:32:06 am »
My office use zentyal for few mounth now without troubleshoting.
But from a few weeks, every morning between 7h and 9h, Zentyal stop working. DHCP no more deliver IP adresses, Can't receive or send Email, can't access zentyal by ssh or browser.
Rebooting zentyal fixe the problem until next morning.
I have spent a lot of time reading syslog file without any result, but i don't really know what to look for.
Can somebody help me?
But from a few weeks, every morning between 7h and 9h, Zentyal stop working. DHCP no more deliver IP adresses, Can't receive or send Email, can't access zentyal by ssh or browser.
Rebooting zentyal fixe the problem until next morning.
I have spent a lot of time reading syslog file without any result, but i don't really know what to look for.
Can somebody help me?
Pages: [1]