Messages

46

Directory and Authentication / local admin GPO greyedout?

« on: December 23, 2020, 03:39:28 am »

Hi,
I was wondering if someone else has had this issue, with zentyal 6.2 not sure if its zentyal or the windows, i tried creating local admin though GPO but the password is greyed out which is very odd

Thank you

https://imgur.com/6l5wC8K.png

47

Directory and Authentication / issue not resolving?

« on: December 22, 2020, 07:47:46 pm »

Hi currently running zentyal 6.2 what i noticed is that cannot seem to resolve by IP but by name it works
currently tick the box  Dynamic DNS Options but not sure what i missed?

Code: [Select]

C:\Users\administrador.xx>nslookup
Servidor predeterminado:  apolo.xx.local
Address:  192.168.100.200

> pc-23
Servidor:  apolo.xxx.local
Address:  192.168.100.200

Nombre:  pc-23.xx.local
Address:  192.168.100.59

> 192.168.100.59
Servidor:  apolo.xx.local
Address:  192.168.100.200

*** apolo.xx.local no encuentra 192.168.100.59: Non-existent domain
just checked the logs and found this

Code: [Select]

Dec 22 13:51:34 apolo dhcpd[17404]: execute: /usr/share/zentyal-dhcp/dhcp-dyndns.sh exit status 32512
and whats even odd is that i check the service of DHCP which shows on but on the WebGui shows stopped

Code: [Select]

root@apolo:~# service isc-dhcp-server status
● isc-dhcp-server.service - ISC DHCP IPv4 server
   Loaded: loaded (/lib/systemd/system/isc-dhcp-server.service; enabled; vendor preset: enabled)
   Active: active (running) since Tue 2020-12-22 13:50:16 -05; 3min 26s ago
     Docs: man:dhcpd(8)
 Main PID: 17404 (dhcpd)
    Tasks: 1 (limit: 4620)
   CGroup: /system.slice/isc-dhcp-server.service
           └─17404 dhcpd -user dhcpd -group dhcpd -f -4 -pf /run/dhcp-server/dhcpd.pid -cf /etc/dhcp/dhcpd.conf

Dec 22 13:53:30 apolo dhcpd[17404]: DHCPACK on 192.168.100.48 to f8:1f:32:c6:19:b4 via eth0
Dec 22 13:53:30 apolo dhcpd[17404]: Commit: IP: 192.168.100.49 DHCID: c0:cb:38:15:96:79 Name: PC-07
Dec 22 13:53:30 apolo dhcpd[17404]: execute_statement argv[0] = /usr/share/zentyal-dhcp/dhcp-dyndns.sh
Dec 22 13:53:30 apolo dhcpd[17404]: execute_statement argv[1] = add
Dec 22 13:53:30 apolo dhcpd[17404]: execute_statement argv[2] = 192.168.100.49
Dec 22 13:53:30 apolo dhcpd[17404]: execute_statement argv[3] = c0:cb:38:15:96:79
Dec 22 13:53:30 apolo dhcpd[17404]: execute_statement argv[4] = PC-07
Dec 22 13:53:30 apolo dhcpd[17404]: execute: /usr/share/zentyal-dhcp/dhcp-dyndns.sh exit status 32512
Dec 22 13:53:30 apolo dhcpd[17404]: DHCPREQUEST for 192.168.100.49 from c0:cb:38:15:96:79 (PC-07) via eth0
Dec 22 13:53:30 apolo dhcpd[17404]: DHCPACK on 192.168.100.49 to c0:cb:38:15:96:79 (PC-07) via eth0

https://imgur.com/QtTnZuL.png

48

Directory and Authentication / Re: Logon Script

« on: December 02, 2020, 12:31:51 am »

the scrip folder should be located in

\\192.168.3.150\sysvol\yourdomain\scripts

49

Directory and Authentication / Re: Logon Script

« on: December 01, 2020, 04:23:38 am »

did you install the GPO addon on a windows machine to deploy the script?

50

Directory and Authentication / Re: Samba issue with scan printer

« on: November 29, 2020, 01:02:18 am »

yeah i know it sucks but yeah it got resolved

51

Directory and Authentication / Re: Samba issue with scan printer

« on: November 28, 2020, 01:37:02 am »

yeah your right, what i did put another samba server

52

Directory and Authentication / Re: Samba issue with scan printer

« on: November 25, 2020, 06:43:41 pm »

Thanks for the reply, well unfortunately it seems that printer does not have any firmware update

https://www.ricoh.com/products/mfp20170727_1

i guess im going to have to enable smbv1 but still haven't seem to be able to configure it

Thank you

53

Directory and Authentication / Re: GPO script logon not working?

« on: November 25, 2020, 06:30:26 pm »

Thanks for the reply that did the trick, very interesting that option that i needed to add

54

Directory and Authentication / Re: GPO script logon not working?

« on: November 23, 2020, 06:53:29 pm »

Thanks for the reply, so whats odd i ran this feature on a windows server 2012r2 and it works but on zentyal no feature works on GPO on the computer section, on the user sections works flawless. Example i tried adding installing OCS inventory though GPO on computer and did not ( from my previous forum post which i put a script GPO on user and it worked) work but i did the same on windows server GPO and it works.
Thank you again

55

Directory and Authentication / Samba issue with scan printer

« on: November 21, 2020, 06:12:20 am »

Hi
I was wondering if someone else has had this issue before.  Currently running Aficio MP 4002 and on windows i can scan to a samba share it works unfortunately  smbv1, i tried enabling on the samba share doing the following on the nano /etc/samba/smb.conf

and adding this under global then restart

service samba-ad-dc restart


client min protocol = NT1
server min protocol = NT1


But not sure what else i missed?

Thank you

56

Directory and Authentication / Re: GPO script logon not working?

« on: November 18, 2020, 03:23:12 am »

thanks for the reply let me know :=)

57

Directory and Authentication / Re: GPO script logon not working?

« on: November 16, 2020, 07:02:57 pm »

Thanks for the reply, good thing forgot to add that checkbox but i also tried gpupdate /force and reboot all kinds and nothing not sure if on your environment it works?

58

Directory and Authentication / Re: GPO script logon not working?

« on: November 15, 2020, 02:26:29 am »

So coming back to the issue i have realized something the GPO dont seem to work for the config of computers only users. Im trying to update the local admin though GPO. I added this config

i restarted the server and checked if the local admin password was changed and it seemed that it was not. then ran  a gpresult and it shows that it does not grab any Computer GPO

see pictures

https://ibb.co/7gKXnsp
https://ibb.co/nrzJFfy

59

Directory and Authentication / Re: GPO script logon not working? (solved)

« on: October 05, 2020, 06:48:07 pm »

Thanks for the reply, what i did was instead running the script on startup i created a task to run the bat instead and it seemed to work that way
thank you again

60

Directory and Authentication / GPO script logon not working?

« on: September 30, 2020, 06:45:55 pm »

Hi,
Currently trying to install a startup script though GPO, before trying on zentyal i did with a window server 2012r2 and it worked. So i think it might be a bug on zentyal.
on the GPO i added the startup script to the location of the script. All the users have permission to have access of the folder. I checked on event viewer and got the
1130 Group policy error

https://imgur.com/r2BRPre.png

https://imgur.com/gOc0eAw.png

any ideas?
Thank you