This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
German / [INFO] Zentyal Tutorial/Doku in deutsch
« on: February 10, 2013, 07:46:15 pm »
Hallo,
da ich Zentyal im Rahmen einer AG eingesetzt habe, habe ich eine länger "Dokumentation" zur Konfiguration und Benutzung von Zentyal geschrieben. Das ganze ist auf der Seite http://www.utorial.org zu finden.
Wer Lust hat, kann auch gerne mitarbeiten: http://utorial.org/doku.php?id=wiki
da ich Zentyal im Rahmen einer AG eingesetzt habe, habe ich eine länger "Dokumentation" zur Konfiguration und Benutzung von Zentyal geschrieben. Das ganze ist auf der Seite http://www.utorial.org zu finden.
Wer Lust hat, kann auch gerne mitarbeiten: http://utorial.org/doku.php?id=wiki
2
Installation and Upgrades / Ubuntu Client
« on: December 27, 2012, 01:14:20 pm »
Hi,
as i read here http://trac.zentyal.org/wiki/Documentation/Community/ZentyalDesktop/Ubuntu there is a package for ubuntu 10.04 und 10.10 to configure an Ubuntu-Client to authenticate against ldap, configure some services and enable roaming-profiles.
But i can't find a package for 12.04 or higher. What is the way to configure an Ubuntu client 12.04?
Thank you.
as i read here http://trac.zentyal.org/wiki/Documentation/Community/ZentyalDesktop/Ubuntu there is a package for ubuntu 10.04 und 10.10 to configure an Ubuntu-Client to authenticate against ldap, configure some services and enable roaming-profiles.
But i can't find a package for 12.04 or higher. What is the way to configure an Ubuntu client 12.04?
Thank you.
3
Installation and Upgrades / Grouppolicies <-> login Script
« on: December 23, 2012, 10:54:44 am »
Hi,
with samba 3 it was possible to specify a logon script in the /etc/samba/smb.conf. I tried this with zentyal 3.0 (samba 4) and it doesn't work. Do i have to solve this with "Group-Policies"? And if, can someone tell me how?
Thank you
with samba 3 it was possible to specify a logon script in the /etc/samba/smb.conf. I tried this with zentyal 3.0 (samba 4) and it doesn't work. Do i have to solve this with "Group-Policies"? And if, can someone tell me how?
Thank you
4
Installation and Upgrades / Can't login to Domain after
« on: December 22, 2012, 12:09:15 pm »
Hi,
I set up Zentyal as a primary Domaincontroller for Windows XP-Clients. I could join the domain successfully, but after some time (without making any changes), when i want to login into a windows-client i get the alert
If i restart all zentyal moduls, everything works fine for a while, until the problem occurs again.
This are the lines in the /var/log/samba/samba.log (adams is the user, ACME.INTERN the Domain and winclient the name of the windows XP client.
Thank you
I set up Zentyal as a primary Domaincontroller for Windows XP-Clients. I could join the domain successfully, but after some time (without making any changes), when i want to login into a windows-client i get the alert
Quote
Username or password incorrect. Check username password and domain and try again.
If i restart all zentyal moduls, everything works fine for a while, until the problem occurs again.
This are the lines in the /var/log/samba/samba.log (adams is the user, ACME.INTERN the Domain and winclient the name of the windows XP client.
Code: [Select]
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: AS-REQ adams@ACME from ipv4:10.0.2.150:1302 for krbtgt/ACME@ACME
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Client sent patypes: ENC-TS, 128
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Looking for PK-INIT(ietf) pa-data -- adams@ACME
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Looking for PK-INIT(win2k) pa-data -- adams@ACME
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Looking for ENC-TS pa-data -- adams@ACME
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Too large time skew, client time 2012-12-22T11:15:51 is out by 31395 > 300 seconds -- adams@ACME
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: AS-REQ adams@ACME from ipv4:10.0.2.150:1303 for krbtgt/ACME@ACME
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Client sent patypes: ENC-TS, 128
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Looking for PK-INIT(ietf) pa-data -- adams@ACME
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Looking for PK-INIT(win2k) pa-data -- adams@ACME
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Looking for ENC-TS pa-data -- adams@ACME
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Too large time skew, client time 2012-12-22T11:15:51 is out by 31395 > 300 seconds -- adams@ACME
[2012/12/22 02:32:36, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
Thank you
5
Installation and Upgrades / Groups DnsUpdateProxy, DnsAdmins and Domain Admins
« on: December 03, 2012, 08:40:04 am »
Hi,
after Installation of zentyal 3.0.7 i found the groups DnsUpdateProxy, DnsAdmins and Domain Admins. But i can't find anything about this groups in the documentation. Can someone tell me, what's the use of these groups?
Thanks
after Installation of zentyal 3.0.7 i found the groups DnsUpdateProxy, DnsAdmins and Domain Admins. But i can't find anything about this groups in the documentation. Can someone tell me, what's the use of these groups?
Thanks
6
Installation and Upgrades / dynDNS and subnetmask 255.0.0.0: 5min to restart DHCP-Modul
« on: November 21, 2012, 09:28:42 pm »
Hi,
i'm using the subnetmask 255.0.0.0, dhcp-modul is configured with a range 10.0.2.50-10.0.2.199. I've a domain acme.intern. I enabled the dynamic DNS option. When restarting the dhcp-modul it takes ~5 minutes, because zentyal is writing 256^3 zones into the dhcpd.conf, like:
Is this correct?
Thank you
i'm using the subnetmask 255.0.0.0, dhcp-modul is configured with a range 10.0.2.50-10.0.2.199. I've a domain acme.intern. I enabled the dynamic DNS option. When restarting the dhcp-modul it takes ~5 minutes, because zentyal is writing 256^3 zones into the dhcpd.conf, like:
Code: [Select]
zone acme.intern. {
primary 127.0.0.1;
key acme.intern.;}
zone 0.0.10.in-addr.arpa. {
primary 127.0.0.1;
key acme.intern.;}
zone 1.0.10.in-addr.arpa. {
primary 127.0.0.1;
key acme.intern.;}
zone 2.0.10.in-addr.arpa. {
primary 127.0.0.1;
key acme.intern.;}
....
and 16 million times more
Is this correct?
Thank you
7
Installation and Upgrades / Network Objects to Domain?
« on: November 20, 2012, 05:48:27 pm »
Hi,
i joined some pc to a group (Objects). For every member of this group i specified an IP-address and the MAC-address. After this, every member of this group is configured to get a static IP-Address via DHCP. So this works fine.
But can i also put a group (Objects) to a domain? So that i can resolve the hostnames of this computers?
Thanks,
i joined some pc to a group (Objects). For every member of this group i specified an IP-address and the MAC-address. After this, every member of this group is configured to get a static IP-Address via DHCP. So this works fine.
But can i also put a group (Objects) to a domain? So that i can resolve the hostnames of this computers?
Thanks,
8
Installation and Upgrades / Overview about configurationfiles affected by zentyal
« on: November 16, 2012, 10:29:13 pm »
Hi,
is there somewhere an overview about the configuration files which will be overwritten by zentyal. Some assignment like modul --> configuration files?
Thanks
is there somewhere an overview about the configuration files which will be overwritten by zentyal. Some assignment like modul --> configuration files?
Thanks
9
Installation and Upgrades / Zarafa: missing icons
« on: September 04, 2012, 09:35:39 pm »
Hi,
i installed the zarafa-module, and its working. But there is still a small problem: Using the webaccess i don't have any icon (like next to "New", or the printing icon).
I found no miss-configured properties.
Did someone had this Problem, too?
Can someone tell me the location of he icons, maybe it's a problem with file-permissions.
Thanks
i installed the zarafa-module, and its working. But there is still a small problem: Using the webaccess i don't have any icon (like next to "New", or the printing icon).
I found no miss-configured properties.
Did someone had this Problem, too?
Can someone tell me the location of he icons, maybe it's a problem with file-permissions.
Thanks
10
Installation and Upgrades / Moodle on a Zentyal server
« on: August 28, 2012, 07:38:39 pm »
Hi,
I installed moodle on an zentyal server. There is also an ldap server (debian based) in my network. I can't connect this server from zentyal
For example with:
and also
How can i configure Zentyal that way, that no certification check takes place?
Or is there a way place the certificate on zentyal server?
Thanks,
I installed moodle on an zentyal server. There is also an ldap server (debian based) in my network. I can't connect this server from zentyal
For example with:
Code: [Select]
ldapwhoami -h 10.0.2.2 -D 'cn=admin,ou=People,dc=skole,dc=skolelinux,dc=no'
i achieveCode: [Select]
ldap_bind: Server is unwilling to perform (53)
additional info: unauthenticated bind (DN with no password) disallowed
and also
Code: [Select]
ldapvi --host 10.0.2.2 -ZZ --bind simple --tls allow -D 'cn=admin,ou=People,dc=skole,dc=skolelinux,dc=no'
ends withCode: [Select]
ldap_start_tls_s: Connect error (-11)
additional info: TLS: hostname does not match CN in peer certificate
How can i configure Zentyal that way, that no certification check takes place?
Or is there a way place the certificate on zentyal server?
Thanks,
11
Installation and Upgrades / Configure Zentyal to accedd from external
« on: August 02, 2012, 10:12:24 pm »
Hi,
i'm using Zentyal on a server with two eth-cards. The first card is conect to a Fritz!Box 6360 cable, which acts a DSL-modem (static ip). I could access the server over the internet. After i configured the second networkcard for internal use, i cannot connect zenyal-server from outside. Can someone tell me how to configure zentyal right for this case.
Thanks
i'm using Zentyal on a server with two eth-cards. The first card is conect to a Fritz!Box 6360 cable, which acts a DSL-modem (static ip). I could access the server over the internet. After i configured the second networkcard for internal use, i cannot connect zenyal-server from outside. Can someone tell me how to configure zentyal right for this case.
Thanks
Pages: [1]