Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
16
Installation and Upgrades / Re: VPN clients > internet
« on: December 09, 2010, 12:16:52 am »
Thx for answer Javier Amor Garcia
I'll try it soon
Your 1st answer is the easiest way for me for test
I think it's ok, nothing more to do ?
Humm, I think openvpn client needs a DNS server... I'll test with Zentyal's IP... why not, I think Zentyal will automatically redirect to the FAI dns server configured in Network > DNS
Will be back soon
I'll try it soon
Your 1st answer is the easiest way for me for test
Quote
You could advertise the address of a gateway connected to ZentyalThe gateway (LAN ip of my FAI router inside my Zentyal's LAN) is configured by default in the Zentyal's Network > Gateway, and Activated button is selected.
I think it's ok, nothing more to do ?
Quote
However after that the clients should add manually the default routeI'll try to configure the network config on the client's openvpn network card without dhcp.
Humm, I think openvpn client needs a DNS server... I'll test with Zentyal's IP... why not, I think Zentyal will automatically redirect to the FAI dns server configured in Network > DNS
Will be back soon
17
Installation and Upgrades / Re: redis-server.log
« on: December 08, 2010, 11:41:56 pm »
Thx cperez for answer
Since last ubuntu / zentyal updates, I haven't seen those cpu problem... I think it's ok now, don't know what's happen... Hope it will continue
Since last ubuntu / zentyal updates, I haven't seen those cpu problem... I think it's ok now, don't know what's happen... Hope it will continue
18
Installation and Upgrades / [SOLVED] VPN clients > internet
« on: November 30, 2010, 04:06:06 pm »
Hello,
Is there an easy way to give internet to VPN clients ?
The goal is to use Zentyal's internet for VPN clients, 'cause clients can be behind proxies or something else restricting their web surf.
I think of a routing rule...?
Thx!!
Is there an easy way to give internet to VPN clients ?
The goal is to use Zentyal's internet for VPN clients, 'cause clients can be behind proxies or something else restricting their web surf.
I think of a routing rule...?
Thx!!
19
Installation and Upgrades / redis-server.log
« on: November 23, 2010, 11:20:31 pm »
Hi!
I'm trying to resolve an unknown problem that causing 100% cpu sometimes...
So i've gone to logs to look for this.
I've found the /var/log/ebox/redis-server.log with that inside :
I haven't found any informations about "redis" to help for my ignorance about that...
Thx for help !
I'm trying to resolve an unknown problem that causing 100% cpu sometimes...
So i've gone to logs to look for this.
I've found the /var/log/ebox/redis-server.log with that inside :
Quote
[...]
23 Nov 22:59:34 - DB saved on disk
23 Nov 22:59:35 - Background saving terminated with success
23 Nov 23:04:36 - 10 changes in 300 seconds. Saving...
23 Nov 23:04:36 - Background saving started by pid 22816
23 Nov 23:04:36 - DB saved on disk
23 Nov 23:04:37 - Background saving terminated with success
23 Nov 23:09:38 - 10 changes in 300 seconds. Saving...
23 Nov 23:09:38 - Background saving started by pid 23956
23 Nov 23:09:38 - DB saved on disk
23 Nov 23:09:39 - Background saving terminated with success
23 Nov 23:14:40 - 10 changes in 300 seconds. Saving...
23 Nov 23:14:40 - Background saving started by pid 25139
23 Nov 23:14:40 - DB saved on disk
23 Nov 23:14:41 - Background saving terminated with success
[...]
I haven't found any informations about "redis" to help for my ignorance about that...
Thx for help !
20
Installation and Upgrades / Move Duplicity .cache to another folder ?
« on: November 15, 2010, 10:46:50 pm »
Hi!
Is it possible to configure another folder for /var/lib/ebox/.cache/duplicity ?
Because not enough free space for making backup...
I've another HDD with a lot of free space, and it can be cool to use it instead
Thx for help
Is it possible to configure another folder for /var/lib/ebox/.cache/duplicity ?
Because not enough free space for making backup...
I've another HDD with a lot of free space, and it can be cool to use it instead
Thx for help
21
Installation and Upgrades / Re: https not working
« on: October 30, 2010, 12:52:18 am »
if you have time, and if you are a little geek...
let's try to install ubuntu, then install zentyal with zentyal repositories...
my computer with zentyal is not a recent hardware (~5/6 years), it works fine (like an old hardware :p not like a missile, lol)
let's try to install ubuntu, then install zentyal with zentyal repositories...
my computer with zentyal is not a recent hardware (~5/6 years), it works fine (like an old hardware :p not like a missile, lol)
23
Installation and Upgrades / LDAP after reinstall, problems
« on: October 28, 2010, 04:24:28 pm »
Hi!
I've uninstalled Zentyal, then reinstalled.
When I go to LDAP,
I can see the "old" users, OK. But unable to delete one of them :
LDAP Settings :
When I want to enable Mail Module :
Thx for help !
I've uninstalled Zentyal, then reinstalled.
When I go to LDAP,
I can see the "old" users, OK. But unable to delete one of them :
Quote
Unknown error at EBox::UsersAndGroups::delUserFromGroup modifications require authenticationtechnical details
Quote
Trace
Unknown error at EBox::UsersAndGroups::delUserFromGroup modifications require authentication at /usr/share/perl5/EBox/Ldap.pm line 699
EBox::Ldap::_errorOnLdap('Net::LDAP::Modify=HASH(0x2404e310)', 'HASH(0x23f7a2e0)') called at /usr/share/perl5/EBox/Ldap.pm line 360
EBox::Ldap::modify('EBox::Ldap=HASH(0x22f1d338)', 'cn=_utilisateurs,ou=Groups,dc=serv1', 'HASH(0x23f7a2e0)') called at /usr/share/perl5/EBox/UsersAndGroups.pm line 1874
EBox::UsersAndGroups::delUserFromGroup('EBox::UsersAndGroups=HASH(0x232a6740)', 'petrus.minos', '_utilisateurs') called at /usr/share/perl5/EBox/UsersAndGroups.pm line 1144
EBox::UsersAndGroups::delUser('EBox::UsersAndGroups=HASH(0x232a6740)', 'petrus.minos') called at /usr/share/perl5/EBox/CGI/UsersAndGroups/Del.pm line 88
EBox::CGI::UsersAndGroups::Del::_process('EBox::CGI::UsersAndGroups::Del=HASH(0x23f08a10)') called at /usr/share/perl5/EBox/CGI/Base.pm line 262
EBox::CGI::Base::run('EBox::CGI::UsersAndGroups::Del=HASH(0x23f08a10)') called at /usr/share/perl5/EBox/CGI/Run.pm line 120
EBox::CGI::Run::run('EBox::CGI::Run', 'UsersAndGroups/Del', 'EBox') called at /usr/share/ebox/cgi/ebox.cgi line 35
ModPerl::ROOT::ModPerl::Registry::usr_share_ebox_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0x24053428)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
eval {...} called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0x23f5cb08)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 170
ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0x23f5cb08)') called at /usr/lib/perl5/ModPerl/Registry.pm line 31
ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0x24053428)') called at -e line 0
eval {...} called at -e line 0
LDAP Settings :
Quote
An internal error has occurred. This is most probably a bug, relevant information can be found in the logs.
When I want to enable Mail Module :
Quote
Failed to enable: Can't call method "attributes" on an undefined value at /usr/share/perl5/EBox/LdapModule.pm line 198.technical details
Quote
Trace
Failed to enable: Can't call method "attributes" on an undefined value at /usr/share/perl5/EBox/LdapModule.pm line 198.
at /usr/share/perl5/EBox/CGI/ServiceModule/ConfigureModuleController.pm line 74
EBox::CGI::ServiceModule::ConfigureModuleController::_process('EBox::CGI::ServiceModule::ConfigureModuleController=HASH(0x24...') called at /usr/share/perl5/EBox/CGI/Base.pm line 262
EBox::CGI::Base::run('EBox::CGI::ServiceModule::ConfigureModuleController=HASH(0x24...') called at /usr/share/perl5/EBox/CGI/Run.pm line 120
EBox::CGI::Run::run('EBox::CGI::Run', 'ServiceModule/ConfigureModuleController', 'EBox') called at /usr/share/ebox/cgi/ebox.cgi line 35
ModPerl::ROOT::ModPerl::Registry::usr_share_ebox_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0x2408d0d8)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
eval {...} called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0x24191bf8)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 170
ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0x24191bf8)') called at /usr/lib/perl5/ModPerl/Registry.pm line 31
ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0x2408d0d8)') called at -e line 0
eval {...} called at -e line 0
Thx for help !
24
Installation and Upgrades / Proxy, import IP/domain list file ?
« on: October 07, 2010, 07:36:11 pm »
Hi!
Quickly, I've seen it can be possible to import a file in proxy config, about domain list filter. on Zentyal.
What kind of content has to be inside this file ?
Only IP ? Only domains names ?
.txt, .dat, .xml ??
What does this file looks like ?
Thx for answers
Quickly, I've seen it can be possible to import a file in proxy config, about domain list filter. on Zentyal.
What kind of content has to be inside this file ?
Only IP ? Only domains names ?
.txt, .dat, .xml ??
What does this file looks like ?
Thx for answers
25
Installation and Upgrades / Re: ebox 1.5 dashboard network graphic
« on: September 29, 2010, 12:13:58 am »
ok, working now
thx!
thx!
26
News and Announcements / Re: Zentyal 2.0-rc1 released!
« on: August 26, 2010, 01:13:35 pm »
ok thx,
1.5 is in the box,
so have to wait for 2.0
thx!
1.5 is in the box,
so have to wait for 2.0
thx!
27
News and Announcements / Re: Zentyal 2.0-rc1 released!
« on: August 26, 2010, 12:20:07 pm »
I haven't found a doc about a repository for 2.0-RC1, is there an adress or will it ok in the future ?
Thx!
Thx!
28
Installation and Upgrades / Re: ebox 1.5 dashboard network graphic
« on: August 13, 2010, 01:48:53 pm »
ok thx for answer !
have fun
have fun
29
Installation and Upgrades / ebox 1.5 dashboard network graphic
« on: August 01, 2010, 03:03:32 pm »
Hi,
like 1.4, dashboard doesn't show any graphical network in french language, it's ok with english language.
last 1.4 post :
http://forum.ebox-platform.com/index.php?topic=1865.msg13383#msg13383
hope this helps
like 1.4, dashboard doesn't show any graphical network in french language, it's ok with english language.
last 1.4 post :
http://forum.ebox-platform.com/index.php?topic=1865.msg13383#msg13383
hope this helps
30
Installation and Upgrades / Re: Big traffic kills eBox (screenshot added)
« on: March 01, 2010, 05:26:48 pm »
Today I've tried with Ubuntu 8.04 only, without eBox.
For the router setup eth0-eth1 I've cheated by using Firestarter (iptable GUI) that allow easily routing and port NAT.
Same problem as before.
Kernel panic, crash and freeze.
So I think it's not an eBox problem... hardware or something wrong with compatibility Ubuntu/hardware.
For the router setup eth0-eth1 I've cheated by using Firestarter (iptable GUI) that allow easily routing and port NAT.
Same problem as before.
Kernel panic, crash and freeze.
So I think it's not an eBox problem... hardware or something wrong with compatibility Ubuntu/hardware.