Zentyal Forum, Linux Small Business Server

Zentyal Server => Installation and Upgrades => Topic started by: karkun on April 25, 2008, 05:13:40 am

Title: Problem with OpenVPN module
Post by: karkun on April 25, 2008, 05:13:40 am

Hi
I have a problem with VPN-module at work with several networks.

My setup:
eth0 internal 10.1.1.117/16
eth1 external 195.x.x.x

(network 192.168.3.0/24)-----[192.168.3.1/24 | Cisco | 10.1.1.2/16]-----(network 10.1.0.0/16)-----[10.1.1.117/16 | ebox | 195.x.x.x]-----[client]

Ebox accepts vpn connections with no problems.
Ebox can ping all PC in 10.1.0.0/16 and 192.168.3.0/24 network.
Client can ping all PC in 10.1.0.0/16 network, but can't access to 192.168.3.0/24 network.
I need access to 192.168.3.0/24 network.

Title: Re: Problem with OpenVPN module
Post by: sixstone on April 25, 2008, 09:30:23 am

Have you advertised the 192.168.3.0/24 network? To do so, you must edit the VPN server to add such network. Furthermore, it is possible that the VPN client cannot connect to that network because that network does not know how to reach the VPN client.

Check this post http://forum.eboxplatform.com/index.php?topic=244.0 (http://forum.eboxplatform.com/index.php?topic=244.0) for details.

Hope this helps.

Title: Re: Problem with OpenVPN module
Post by: karkun on April 28, 2008, 04:58:34 am

All has been adjusted, but did not work  ???
All works after removal of all routes and their adjustment anew...

Title: Re: Problem with OpenVPN module
Post by: ribaraki on May 05, 2008, 08:13:32 pm

I am having exactly the same problem, has somebody solved this issue?

Title: Re: Problem with OpenVPN module
Post by: Javier Amor Garcia on May 06, 2008, 08:56:28 am

ribarki: are you sure that the internal network have a return route to the client?