This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Add an External USB Raid Drive
« on: January 26, 2015, 12:07:34 am »
Hello,
I am trying to add an external USB raid drive. I have partitioned it as one large partition and formatted ext4. Here is the output from blkid:
sudo blkid
/dev/sda2: UUID="5f9c233c-45a8-4380-92cc-ba573cdfd03a" TYPE="ext2"
/dev/sda3: UUID="pIAN8x-eRfB-tiFS-cgIU-1DyO-wwf1-LDAEPO" TYPE="LVM2_member"
/dev/mapper/absolute5--vg-root: UUID="22a1b4ab-221f-4a0f-a6f9-5c331c20f50c" TYPE="ext4"
/dev/mapper/absolute5--vg-swap_1: UUID="a162c99d-b195-495e-857b-688c892b1434" TYPE="swap"
/dev/sdb1: UUID="6ab94a73-9d73-4473-bbf9-1281eb972302" TYPE="ext4"
I have edited /etc/fstab and added:
UUID=6ab94a73-9d73-4473-bbf9-1281eb972302 /media/data ext4 acl,users,noauto,errors=remount-ro 0 1
saved the file and rebooted. When i do a mount here is the result:
mount
/dev/mapper/absolute5--vg-root on / type ext4 (rw,errors=remount-ro,usrquota,grpquota,acl,user_xattr)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=52428800)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda2 on /boot type ext2 (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
Ultimately I would like to keep shares and user data on this external raid. Can I do that?
All help is greatly appreciated!
Dale
I am trying to add an external USB raid drive. I have partitioned it as one large partition and formatted ext4. Here is the output from blkid:
sudo blkid
/dev/sda2: UUID="5f9c233c-45a8-4380-92cc-ba573cdfd03a" TYPE="ext2"
/dev/sda3: UUID="pIAN8x-eRfB-tiFS-cgIU-1DyO-wwf1-LDAEPO" TYPE="LVM2_member"
/dev/mapper/absolute5--vg-root: UUID="22a1b4ab-221f-4a0f-a6f9-5c331c20f50c" TYPE="ext4"
/dev/mapper/absolute5--vg-swap_1: UUID="a162c99d-b195-495e-857b-688c892b1434" TYPE="swap"
/dev/sdb1: UUID="6ab94a73-9d73-4473-bbf9-1281eb972302" TYPE="ext4"
I have edited /etc/fstab and added:
UUID=6ab94a73-9d73-4473-bbf9-1281eb972302 /media/data ext4 acl,users,noauto,errors=remount-ro 0 1
saved the file and rebooted. When i do a mount here is the result:
mount
/dev/mapper/absolute5--vg-root on / type ext4 (rw,errors=remount-ro,usrquota,grpquota,acl,user_xattr)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=52428800)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda2 on /boot type ext2 (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
Ultimately I would like to keep shares and user data on this external raid. Can I do that?
All help is greatly appreciated!
Dale
2
Installation and Upgrades / [SOLVED}Unable to upgrade to 4.0, disk full. Can I add an external drive for
« on: January 08, 2015, 04:54:46 pm »
Hello,
I have a mac mini with a SSD on which I have had Zentyal running for about a year. I tried to update to 4.0 from 3.5 but it failed. I went to a terminal window and tried a sudo apt-get update then a sudo apt-get upgrade. The update appeared to work but the upgrade failed. I then tried a sudo apt-get -f install. This also failed and gave the message "cannot copy extracted data for './boot/vmlinuz-3.13.0-43-generic' to '/boot/vmlinuz-3.13.0-43-generic.dpkg-new': failed to write (No space left on device)".
I tried 'apt-get autoremove' and get the following message:
"Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies:
linux-image-extra-3.13.0-43-generic : Depends: linux-image-3.13.0-43-generic but it is not installed
linux-image-generic : Depends: linux-image-3.13.0-43-generic but it is not installed
E: Unmet dependencies. Try using -f."
Can I add an additional external disk (usb raid) and reallocate the partitions?
Thanks!
dale
I have a mac mini with a SSD on which I have had Zentyal running for about a year. I tried to update to 4.0 from 3.5 but it failed. I went to a terminal window and tried a sudo apt-get update then a sudo apt-get upgrade. The update appeared to work but the upgrade failed. I then tried a sudo apt-get -f install. This also failed and gave the message "cannot copy extracted data for './boot/vmlinuz-3.13.0-43-generic' to '/boot/vmlinuz-3.13.0-43-generic.dpkg-new': failed to write (No space left on device)".
I tried 'apt-get autoremove' and get the following message:
"Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies:
linux-image-extra-3.13.0-43-generic : Depends: linux-image-3.13.0-43-generic but it is not installed
linux-image-generic : Depends: linux-image-3.13.0-43-generic but it is not installed
E: Unmet dependencies. Try using -f."
Can I add an additional external disk (usb raid) and reallocate the partitions?
Thanks!
dale
3
Installation and Upgrades / Small Footprint computer for router/firewall
« on: July 23, 2014, 03:31:39 pm »
Hello Everyone,
I want to use Zentyal as a router and was wondering if anyone has a hardware suggestion for a small footprint, low power consumption box. Something like an Intel NUC only with dual NIC Cards.
Thanks to everyone in advance.
I want to use Zentyal as a router and was wondering if anyone has a hardware suggestion for a small footprint, low power consumption box. Something like an Intel NUC only with dual NIC Cards.
Thanks to everyone in advance.
4
Installation and Upgrades / [SOLVED] Unable to join Windows 7 Pro to domain
« on: May 05, 2014, 07:40:46 pm »
Hello,
I am unable to join windows 7 pro machines to a Zentyal PDC.
I get the message "Logon failure: unknown user name or bad password." from the Win7 clients.
I started this project a couple months ago with v3.2 64 bit running on a AMD Phenom / Gigabyte combo. I followed the videos from the Jonas Technology site and got the above error. I tried connecting a clean in stall of Windows 7 pro and still didn't have success. I installed Zentyal on a Intel Atom based machine and had the same error.
I gave up until this last weekend when I had time again. This time I installed 3.4 64bit on a Mac Mini I7 computer. I followed all of the steps in Techmint.com Part 1 tutorial, several times, (sometimes doing a apt -get update or upgrade and other things) always with the same error.
I thought maybe there was something in my router/gateway, so I replaced it with a freshly reset Linksys WRT54G. So my network is a cable modem, fresh WRT54G and a switch (not managed). I re-installed on the new network and received the same error. I reinstalled and used a different user name thinking that there might be a conflict with that (I was using administrator). Same Problem. I tried a different hostname finally landing on absolute5.absolutedomain.com. Still the same problems. What am I missing?
I would really like to get this working for my home network so I can administer user shares and have roaming profiles.
The next post contains the output from dpkg. (the message length was too long)
Thanks to everyone in advance!
dale
I am unable to join windows 7 pro machines to a Zentyal PDC.
I get the message "Logon failure: unknown user name or bad password." from the Win7 clients.
I started this project a couple months ago with v3.2 64 bit running on a AMD Phenom / Gigabyte combo. I followed the videos from the Jonas Technology site and got the above error. I tried connecting a clean in stall of Windows 7 pro and still didn't have success. I installed Zentyal on a Intel Atom based machine and had the same error.
I gave up until this last weekend when I had time again. This time I installed 3.4 64bit on a Mac Mini I7 computer. I followed all of the steps in Techmint.com Part 1 tutorial, several times, (sometimes doing a apt -get update or upgrade and other things) always with the same error.
I thought maybe there was something in my router/gateway, so I replaced it with a freshly reset Linksys WRT54G. So my network is a cable modem, fresh WRT54G and a switch (not managed). I re-installed on the new network and received the same error. I reinstalled and used a different user name thinking that there might be a conflict with that (I was using administrator). Same Problem. I tried a different hostname finally landing on absolute5.absolutedomain.com. Still the same problems. What am I missing?
I would really like to get this working for my home network so I can administer user shares and have roaming profiles.
The next post contains the output from dpkg. (the message length was too long)
Thanks to everyone in advance!
dale
Pages: [1]