This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
German / Re: mounten von Freigaben unter lubuntu
« on: November 05, 2014, 07:44:20 pm »... wie hier
https://wiki.zentyal.org/wiki/Talk:Authenticating_Linux_client_against_Samba
angegeben eingebunden. Das klappt gut.
Nach möglichst dem gleichen Schema möchte ich nun die Dateifreigaben einbinden
Weitere Freigaben habe ich so eingebunden:
Code: [Select]
<volume user="*" fstype="cifs" server="10.1.100.1" path="%(DOMAIN_USER)" mountpoint="/home/%(DOMAIN_USER)" options="sec=ntlm,nodev,nosuid" />
<volume user="*" fstype="cifs" server="10.1.100.1" path="download" mountpoint="/home/%(DOMAIN_USER)/SRV/download" options="sec=ntlm,nodev,nosuid" />
<volume user="*" fstype="cifs" server="10.1.100.1" path="temp" mountpoint="/home/%(DOMAIN_USER)/SRV/temp" options="sec=ntlm,nodev,nosuid" />
Der Zwischenschritt mit .../SRV/... darf natürlich entfallen.
Viele Grüße
2
Installation and Upgrades / Re: sssd authentication in zentyal server
« on: July 26, 2014, 04:17:54 pm »... which contains the correct settings for authenticating with sssd.
Take a look at https://wiki.zentyal.org/wiki/Authenticating_Linux_client_against_Samba -- you will find a working sssd.conf
3
Installation and Upgrades / Re: Zentyal forum cookies usage
« on: April 28, 2014, 06:03:16 pm »
The pop-up is gone!
Thank you
Thank you
4
Installation and Upgrades / Re: Zentyal forum cookies usage
« on: April 26, 2014, 11:42:35 am »
This is a rare situation where I need to post: "Me too!" That pop-up is simply annoying. And it is stupid as it makes me go away
5
Installation and Upgrades / Re: HOWTO: Ubuntu client with LDAP authentication and pam_mount for mounting $HOME
« on: April 25, 2014, 05:26:31 pm »My client is a ubuntu box.
Please be careful regarding version numbers on both client and server side - "ubuntu box" is not a helpful information nor did you mention the server version.
A few minutes ago I've installed a fresh Xubuntu 14.04 as a client and this Howto works exactly a shown in the first post. But... only for Zentyal 3.0.x, not for newer versions
Best regards
6
Installation and Upgrades / Re: smb.conf Reverts to previous version on server restart
« on: March 20, 2014, 09:54:30 pm »...smb.conf reverts to the previous/original version. Is there any way to make these changes permanent?
You might prepare a file "smb.conf.mas" which fits your needs. Please see http://doc.zentyal.org/en/appendix-c.html#advanced-service-customization
7
Installation and Upgrades / Re: Permission denied - Creating a share on second harddisk
« on: March 17, 2014, 07:29:46 pm »How can that be Workaround - I Need some root Shares to administrate some applications and want to copy files direkt to Folder-structure.
I would share (only) the top level folder and set the access rights on folder level. For your example: Group_A and Group_B have access to Folder1. Only Group_B has rights to access Folder2.
8
Installation and Upgrades / Re: HOWTO: Ubuntu client with LDAP authentication and pam_mount for mounting $HOME
« on: March 17, 2014, 07:09:43 pm »Code: [Select]VirtualBox~# ldapsearch -D "uid=test,ou=Users,dc=neo,dc=lan" -LLL -W uid=test homeDirectory
My problem is that I don't know, what password shoud I type in request.
Enter LDAP Password:
Basically it asks for the password of that user named "test". See "man ldapsearch": " -D binddn Use the Distinguished Name binddn to bind to the LDAP directory."
Unfortunately I can not confirm that my Howto will work with version 3.3. I did use - and I do still use - version 3.0. (My attempt to upgrade ended in a disaster and I was glad to have backups...)
Best regards
9
Installation and Upgrades / Re: SRV record for the resource record - DNS Setting
« on: March 06, 2014, 08:12:44 pm »
You might find the solution here:
https://forum.zentyal.org/index.php/topic,13712.msg75670.html#msg75670
https://forum.zentyal.org/index.php/topic,13712.msg75670.html#msg75670
10
Installation and Upgrades / Re: issue with LDAP
« on: March 03, 2014, 07:50:28 pm »ldapsearch -x -W -D 'cn=zentyal,dc=example,dc=com' -b "" -s base -H ldap://localhost
On port 389 you are talking to the Samba4 built-in Ldap. Probably you want to talk to the Zentyal-Ldap which listens on port 390.
11
Installation and Upgrades / Re: Zentyal is broken after last update (3.2.5)
« on: January 25, 2014, 12:24:23 pm »I`ve tried this before. Tried again and same thing happens:Code: [Select]The following packages have unmet dependencies:
zentyal-objects : Depends: zentyal-core (>= 3.2.5) but 3.2.4 is installed
E: Unmet dependencies. Try using -f
1) Please make sure to run apt-get update first.
2) Then try (and post the result of) the mentioned apt-get -f install.
3) Perhaps the output of apt-cache policy zentyal-core could shed light on the various package numbers.
12
Installation and Upgrades / Re: mount.cifs of SAMBA share Fail by using Kerberos
« on: January 06, 2014, 07:21:19 pm »Code: [Select]sudo mount.cifs //mydc.mydomain/myshare /tmp/myshare -o user=myuser,sec=krb5,cruid=myuid,cifsacl,fsc --verbose
but as a result I have obtained the following error:Code: [Select]mount error(126): Required key not available
You need to have a Kerberos Ticket-Granting-Ticket. Get one by running "kinit":
(( uba = a Domain User; zentyal = my Zentyal Server; neu.lan = my AD Domain; ubuntugnome = a client machine ))
Code: [Select]
root@ubuntugnome:~# klist
klist: No credentials cache found (ticket cache FILE:/tmp/krb5cc_0)
root@ubuntugnome:~# kinit uba
Password for uba@NEU.LAN:
Warning: Your password will expire in 348 days on Sat Dec 20 20:15:36 2014
root@ubuntugnome:~# klist
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: uba@NEU.LAN
Valid starting Expires Service principal
2014-01-06 19:14:33 2014-01-07 05:14:33 krbtgt/NEU.LAN@NEU.LAN
renew until 2014-01-07 19:14:34
Only then you can mount:
Code: [Select]
root@ubuntugnome:~# kinit uba
Password for uba@NEU.LAN:
Warning: Your password will expire in 348 days on Sat Dec 20 20:15:36 2014
root@ubuntugnome:~# mount.cifs //zentyal.neu.lan/temp /mnt/temp -o user=uba,sec=krb5,cifsacl,fsc --verbose
mount.cifs kernel mount options: ip=10.4.132.1,unc=\\zentyal.neu.lan\temp,sec=krb5,cifsacl,fsc,user=uba,pass=********
root@ubuntugnome:~# mount | grep temp
//zentyal.neu.lan/temp on /mnt/temp type cifs (rw)
root@ubuntugnome:~# klist
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: uba@NEU.LAN
Valid starting Expires Service principal
2014-01-06 19:14:33 2014-01-07 05:14:33 krbtgt/NEU.LAN@NEU.LAN
renew until 2014-01-07 19:14:34
2014-01-06 19:15:55 2014-01-07 05:14:33 cifs/zentyal.neu.lan@
renew until 2014-01-07 19:14:34
2014-01-06 19:15:55 2014-01-07 05:14:33 cifs/zentyal.neu.lan@NEU.LAN
renew until 2014-01-07 19:14:34
There might be some more pre-requirements which I met on my test-machine because of prior tests. Not sure...
For an alternative you might want to read http://forum.zentyal.org/index.php/topic,12925.msg53495.html#msg53495
13
Installation and Upgrades / Re: Adding services to /etc/services still not working for DNS SRV records
« on: January 01, 2014, 10:26:12 am »works not.
Just because I was curious I did a test for you. On a (nearly) fresh Zentyal 3.3 I did (translated back from another language):
Service
Add service
Name: dummyservice
Configuration
New Entry
Sourceport: any
Destination: 12777
DNS - Domain - Services
(I get a table with six kerberos related entries)
Add new entry
Name: dummyservice
Destination: 12777
At this point I get an error message
"Service 'dummyservice' is not present in /etc/services"
Okay, fill up /etc/services with
Code: [Select]
dummyservice 12777/tcp
This did NOT solve this issue immediately. Because I do not know which software part caches /etc/services (restarting DNS and Samba is not enough) I chose to reboot! Then it worked
Code: [Select]
~$ host -t SRV _dummyservice._tcp
_dummyservice._tcp.neu.lan has SRV record 0 0 12777 zentyal.neu.lan.
14
Installation and Upgrades / Re: Zarafa fail after upgrade from version 3.2 to version 3.3
« on: December 30, 2013, 02:23:44 pm »I have upgraded my Zentyal server from version 3.2 to version 3.3 and now Zarafa don't work, I get the error in the attached file in the navigator indicating that PHP extension is not found, can I solve this error? Thanks
Though I do not use 3.3 nor Zarafa, what I would do is in a Terminal window:
Code: [Select]
sudo apt-get update && sudo apt-get install php5-mapi
This should help only if that package is not installed already for any dependency error and no version conflict exists. Restarting apache might be necessary also.
15
Installation and Upgrades / Re: Zentyal 3.2 LDAP frustrations
« on: December 30, 2013, 08:43:26 am »When will 3.3 be available to the general public to download?
It is already available, see http://trac.zentyal.org/wiki/Document/Announcement/3.3