Recent Posts

Pages: [1] 2 3 ... 10
1
So, to answer my own question, for future reference:

I ended up installing a TrueNAS virtual machine on Proxmox and joined it to the domain created in Zentyal.
Created a pool and share following TrueNAS instructions, giving the appropriate rights in that share through RSAT.

I was then able to deploy the group policy and 7Zip.MSI was installed on the test Win10 client.
2
If you touch the network interface, switch from dhcp to static then back to dhcp the error goes away.
3
Other modules / Re: Zentyal 7.0 DHCP error
« Last post by turalyon on January 18, 2022, 04:41:32 pm »
Hi,

First of all, you need to check the status of the package 'zentyal-dhcp':

Code: [Select]
sudo dpkg -l zentyal-dhcp

Then, I recommend you to check if there is other package that is broken:

Code: [Select]
sudo dpkg -l | egrep -v '^ii'

In case you have any broken package, you can try to fix them with the following command:

Code: [Select]
sudo dpkg --configure -a

If the issue persists, then, analyze the following log files in order to get any information about the error:

* /var/log/zentyal/zentyal.log
* /var/log/syslog
* /var/log/dpkg.log
* /var/log/apt/

Also, you should check the disk space:

Code: [Select]
df -h

furthermore, you should take a look at apparmor, perhaps it is causing you the issue with this module.

Code: [Select]
sudo systemctl status apparmor

Hope it helps.

--

“This world is ours, and by the Holy Light we will keep it safe, now and forever"
4
Hi,

The GPO must be created through RSAT tools. So, you need to use a Windows computer logged in the domain with an administrator user to create that policy.

NOTE: Don't forget to add the domain groups in the 'delegation' tab:

* domain users
* domain computers

--

“This world is ours, and by the Holy Light we will keep it safe, now and forever"
5
Hello,
I want to add one domain-wide GPO rule on a Zentyal7 samba/AD server to prevent any updates for Thunderbird on all local Windows clients, since the update usually breaks a lot of perfectly working stuff.

What is the easiest way, preferably from the command line in Linux, to do this ?
Currently, I only know that the following registry value is doing this, but for each client only, not domain-wide :

Code: [Select]
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Mozilla\Thunderbird]
"DisableAppUpdate"=dword:00000001

... and I don't want to run to each client computer and add this registry value by hand, when some domain-wide rule could do it.
6
Spanish / Re: Error Samba, ya no funcionan los permisos
« Last post by aarcos on January 13, 2022, 02:30:54 pm »
Hola ayepes2003

Trata de postear  en ingles, el equipo de Zentyal responde normalmente!!! pero en esa lengua

Lo mejor
7
I did find a way to do this:

  • Add new virtual interface with IP address in the new network (not that IP the server should have)
  • Logg in to the new IP address via webb GUI
  • Set the new IP for default gateway
  • Change to the new IP address under Network Interface
  • Remove the virtual interface created in first point
8
Installation and Upgrades / Re: odd issue with bind?
« Last post by killmasta93 on January 11, 2022, 11:34:42 pm »
Thanks for the reply, it seems that changing the DNS forwarders to my pfsense seemed to fix the issue
9
Hi,
I have installed som Zentyal servers with Active Directory and DNS. Now we have rebuilt our networks and I have to move the servers to a new network. I have to set new IP addresses and set new default gateway.
How could I do this?

I have tested to change the IP in /etc/network/interfaces and I can connect to the the new IP address on the new network via the web GUI. I cannot change the IP and DGW because som error messages.

/Pelle H

Zentyal 7.0
Installed on Ubuntu 20.04
10
Other modules / Zentyal 7.0 DHCP error
« Last post by randyrf on January 08, 2022, 06:21:24 am »
Server is working fine, but on dashboard it says DHCP module installed incorrectly.   run command
sudo dpkg --configure -a to correct.

Tried running command but still have errer.   Tried restarting program.

The network is currently using the DHCP server from the ROUTER, so it's not necessary, but I don't even see it as an option to configurer / enable or disable.

Thanks!
Pages: [1] 2 3 ... 10