Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: 1 [2]
16
Installation and Upgrades / ClamAV
« on: December 07, 2008, 08:20:13 pm »
Guys,
How do we update ClamAV with out breaking lots of other stuff?
I get these messages on a regular basis.
now i am getting this
This new message startied 16 hours ago.
Anybody know what is going on?
-jeff
How do we update ClamAV with out breaking lots of other stuff?
I get these messages on a regular basis.
Quote
/etc/cron.hourly/ebox:
* Restarting eBox module: events
...done.
/etc/cron.hourly/freshclam:
ClamAV update process started at Sat Dec 6 17:17:05 2008
WARNING: Your ClamAV installation is OUTDATED!
DON'T PANIC! Read http://www.clamav.net/support/faq
WARNING: Local version: 0.92.1 Recommended version: 0.94.2
main.inc is up to date (version: 49, sigs: 437972, f-level: 35, builder: sven)
daily.inc is up to date (version: 8729, sigs: 34177, f-level: 38, builder: guitar)
run-parts: /etc/cron.hourly/freshclam exited with return code 1
now i am getting this
Quote
/etc/cron.hourly/ebox:
* Restarting eBox module: events
...done.
/etc/cron.hourly/freshclam:
ClamAV update process started at Sat Dec 6 22:17:05 2008
WARNING: Can't query current.cvd.clamav.net
WARNING: Invalid DNS reply. Falling back to HTTP mode.
Reading CVD header (main.cvd): ERROR: Can't get information about db.local.clamav.net: Temporary DNS error
WARNING: Can't read main.cvd header from db.local.clamav.net (IP: )
Trying again in 5 secs...
ClamAV update process started at Sat Dec 6 22:18:30 2008
WARNING: Can't query current.cvd.clamav.net
WARNING: Invalid DNS reply. Falling back to HTTP mode.
Reading CVD header (main.cvd): ERROR: Can't get information about db.local.clamav.net: Temporary DNS error
WARNING: Can't read main.cvd header from db.local.clamav.net (IP: )
Trying again in 5 secs...
ClamAV update process started at Sat Dec 6 22:19:55 2008
WARNING: Can't query current.cvd.clamav.net
WARNING: Invalid DNS reply. Falling back to HTTP mode.
Reading CVD header (main.cvd): ERROR: Can't get information about db.local.clamav.net: Temporary DNS error
WARNING: Can't read main.cvd header from db.local.clamav.net (IP: )
Trying again in 5 secs...
ClamAV update process started at Sat Dec 6 22:21:20 2008
WARNING: Can't query current.cvd.clamav.net
WARNING: Invalid DNS reply. Falling back to HTTP mode.
Reading CVD header (main.cvd): ERROR: Can't get information about db.local.clamav.net: Temporary DNS error
WARNING: Can't read main.cvd header from db.local.clamav.net (IP: )
Trying again in 5 secs...
ClamAV update process started at Sat Dec 6 22:22:45 2008
WARNING: Can't query current.cvd.clamav.net
WARNING: Invalid DNS reply. Falling back to HTTP mode.
Reading CVD header (main.cvd): ERROR: Can't get information about db.local.clamav.net: Temporary DNS error
WARNING: Can't read main.cvd header from db.local.clamav.net (IP: )
Giving up on db.local.clamav.net...
ClamAV update process started at Sat Dec 6 22:24:05 2008
WARNING: Can't query current.cvd.clamav.net
WARNING: Invalid DNS reply. Falling back to HTTP mode.
Reading CVD header (main.cvd): Trying again in 5 secs...
ERROR: Can't get information about database.clamav.net: Temporary DNS error
WARNING: Can't read main.cvd header from database.clamav.net (IP: )
ClamAV update process started at Sat Dec 6 22:25:30 2008
WARNING: Can't query current.cvd.clamav.net
WARNING: Invalid DNS reply. Falling back to HTTP mode.
Reading CVD header (main.cvd): ERROR: Can't get information about database.clamav.net: Temporary DNS error
WARNING: Can't read main.cvd header from database.clamav.net (IP: )
Trying again in 5 secs...
ClamAV update process started at Sat Dec 6 22:26:55 2008
WARNING: Can't query current.cvd.clamav.net
WARNING: Invalid DNS reply. Falling back to HTTP mode.
Reading CVD header (main.cvd): Trying again in 5 secs...
ERROR: Can't get information about database.clamav.net: Temporary DNS error
WARNING: Can't read main.cvd header from database.clamav.net (IP: )
ClamAV update process started at Sat Dec 6 22:28:20 2008
WARNING: Can't query current.cvd.clamav.net
WARNING: Invalid DNS reply. Falling back to HTTP mode.
Reading CVD header (main.cvd): ERROR: Can't get information about database.clamav.net: Temporary DNS error
WARNING: Can't read main.cvd header from database.clamav.net (IP: )
Trying again in 5 secs...
ClamAV update process started at Sat Dec 6 22:29:45 2008
WARNING: Can't query current.cvd.clamav.net
WARNING: Invalid DNS reply. Falling back to HTTP mode.
Reading CVD header (main.cvd): ERROR: Can't get information about database.clamav.net: Temporary DNS error
Giving up on database.clamav.net...
Update failed. Your network may be down or none of the mirrors listed in freshclam.conf is working. Check http://www.clamav.net/support/mirror-problem for possible reasons.
WARNING: Can't read main.cvd header from database.clamav.net (IP: )
run-parts: /etc/cron.hourly/freshclam exited with return code 58
This new message startied 16 hours ago.
Anybody know what is going on?
-jeff
17
Installation and Upgrades / need help firewall and Squid
« on: December 01, 2008, 05:42:33 am »
Hi all, I have 4 kids on a bunch of different computers spread out all over the house. I need to set up some quite restrictive rules about which sites that they can conned to. I see no way to access the Squid module that my reading said handled most of the web filtering. I'd love to be able to set up filtering for them in two sets of rules, one for during school, and one for after school. Also, I'd like to have my wifes and my systems have free range of the INTERNET.
Please give me specific instructions, as I have not been on a UNIX like system since the early 90's
I do have a SSH program on my workstation so I can login to the box. but only remember a very few of the command line commands.
-jeff
Please give me specific instructions, as I have not been on a UNIX like system since the early 90's
I do have a SSH program on my workstation so I can login to the box. but only remember a very few of the command line commands.
-jeff
18
Installation and Upgrades / need help DHCP
« on: December 01, 2008, 05:35:03 am »
probably an easy quesion for you guys to answer but how do I monitor the DHCP clients that have gotten addresses form my ebox?
also how do I deal with laptops that have one host name and connect sometimes with a wired connection and sometimes via one of my APs? the problem is that they have two MAC's and one name.
My eBox has eth0-eth4. I use eth0 as the wan connection and that will be a DHCP Client to my ISP.
Eth1 (192.168.1.1) is my normal home domain, and eth2 (192.168.2.1) is my DMZ where I will be putting some other servers.
eth3 and eth4 will be used for testing. 192.168.3 & 4 respectively.
Also how do I tell the DHCP clients that they need to get NTP from the eBox
Also How do I tell the DHCP Clients to go to eBox for DNS and as a network gateway as well.
I sorta expect that when I install the eBox as the gateway and configure eth0 as external that it will handle the DNS and gateway issues automatically by setting those values in the respective DHCP Server as 192.168.x.1. Am I wrong?
also how do I deal with laptops that have one host name and connect sometimes with a wired connection and sometimes via one of my APs? the problem is that they have two MAC's and one name.
My eBox has eth0-eth4. I use eth0 as the wan connection and that will be a DHCP Client to my ISP.
Eth1 (192.168.1.1) is my normal home domain, and eth2 (192.168.2.1) is my DMZ where I will be putting some other servers.
eth3 and eth4 will be used for testing. 192.168.3 & 4 respectively.
Also how do I tell the DHCP clients that they need to get NTP from the eBox
Also How do I tell the DHCP Clients to go to eBox for DNS and as a network gateway as well.
I sorta expect that when I install the eBox as the gateway and configure eth0 as external that it will handle the DNS and gateway issues automatically by setting those values in the respective DHCP Server as 192.168.x.1. Am I wrong?
19
Installation and Upgrades / CIDR Notation help
« on: November 29, 2008, 05:44:42 am »
If I have a network of 92.168.1.x and a Net mask of 255.255.252.0 then they would be 192.168.1.0/24 in CIDR Notation, RIGHT?
-jeff
-jeff
20
Installation and Upgrades / Probem with eBox live CD test installation
« on: November 29, 2008, 05:26:03 am »
All,
I did a lot of research and decided to try eBox as my first project.
The CD boots and comes up to the https://localhost/summary/index on the attached monitor. I can ping the box but it can't ping anything else on the network but the two DD-wrt routers in the house. I have not tried to ping outside of the house.
I can not get the https://ipaddr/eBox to respond.
I most likely did something really stupid.
please help, I don't know UNIX so all of your help is really appreciated.
-jeff
I did a lot of research and decided to try eBox as my first project.
The CD boots and comes up to the https://localhost/summary/index on the attached monitor. I can ping the box but it can't ping anything else on the network but the two DD-wrt routers in the house. I have not tried to ping outside of the house.
I can not get the https://ipaddr/eBox to respond.
I most likely did something really stupid.
please help, I don't know UNIX so all of your help is really appreciated.
-jeff
Pages: 1 [2]