Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
1
Installation and Upgrades / Re: Firewall rules for PPTP server in Zentyal 2.2
« on: October 03, 2011, 06:45:22 pm »
I have almost gotten it to work now... I was using the wrong gateway in my network settings...
At least I can connect to the VPN server with the user and password. But I can't reach any servers on that VPN connection.
I have the PPTP Service and have made a rule on "External networks to Zentyal"
At least I can connect to the VPN server with the user and password. But I can't reach any servers on that VPN connection.
I have the PPTP Service and have made a rule on "External networks to Zentyal"
2
Installation and Upgrades / Firewall rules for PPTP server in Zentyal 2.2
« on: October 03, 2011, 04:02:19 pm »
Hi.
I have installed a zentyal 2.2 as a firewall with pptp server. I have added a few pptp users, and tried to open the firewall for pptp traffic.
But I am unable to connect.
I have read the manual:
http://doc.zentyal.org/en/pptp.html
And it says to open 1723/TCP port and the GRE protocol.
I have tried to do that too...
Can anyone tell me what to open in the correct part of the firewall (packet filter)?
I have installed a zentyal 2.2 as a firewall with pptp server. I have added a few pptp users, and tried to open the firewall for pptp traffic.
But I am unable to connect.
I have read the manual:
http://doc.zentyal.org/en/pptp.html
And it says to open 1723/TCP port and the GRE protocol.
I have tried to do that too...
Can anyone tell me what to open in the correct part of the firewall (packet filter)?
3
Installation and Upgrades / Re: Zarfara Groupware
« on: September 10, 2010, 02:25:00 pm »And I can only use 3 Outlook accounts with community edition?You can only use 3 Outlook integrated with Zarafa accounts(similar to exchange server) with the community edition.
You can use Outlook with as many imap clients you want.
Or just use the Zarafa interface...
4
Installation and Upgrades / Re: Migration from 1.4 to 2.0 ?
« on: September 06, 2010, 11:04:46 am »
From the FAQ liked above:
I have set up backup from Zentyal and eBox to a samba share on a NAS.
How do I restore the eBox backup on Zentyal?
Code: [Select]
Our recommendation it's to make a backup of your data (including users and group on LDAP) and restore it on a new fresh Zentyal installation.I have set up a Virtualbox with Zentyal, eBox 1.4 is running on our server.I have set up backup from Zentyal and eBox to a samba share on a NAS.
How do I restore the eBox backup on Zentyal?
5
Installation and Upgrades / Pootle password.
« on: September 01, 2010, 01:10:28 pm »
Did the passwords on the pootle server change with Zentyal?
I can not log in to continue translating.
I tried to reregister too and got this message:
"You (or someone else) attempted to register an account with your username.
We don't store your actual password but only a hash of it.
If you have a problem with registration, please contact it@zentyal.org.
Your user name is: xxxxxx
Your registered email address is: xxx@xx.xx"
I can not log in to continue translating.
I tried to reregister too and got this message:
"You (or someone else) attempted to register an account with your username.
We don't store your actual password but only a hash of it.
If you have a problem with registration, please contact it@zentyal.org.
Your user name is: xxxxxx
Your registered email address is: xxx@xx.xx"
6
News and Announcements / Re: Last sprint in translations for eBox 1.4
« on: February 01, 2010, 04:40:49 pm »
Any updates on the final deadline for the translations?
7
Installation and Upgrades / Sync Mobiles with Active Sync protocol
« on: October 28, 2009, 08:57:07 am »
I came over a Open Source solution to do just this...
Would be a great feature to integrate into eBox...
http://z-push.sourceforge.net/soswp/index.php?pages_id=1&t=home
"More info:
Z-push is an implementation of the ActiveSync protocol which is used 'over-the-air' for multi platform ActiveSync devices, including Windows Mobile, iPhone, Sony Ericsson and Nokia mobile devices. With Z-push any groupware can be connected and synced with these devices."
Would be a great feature to integrate into eBox...
http://z-push.sourceforge.net/soswp/index.php?pages_id=1&t=home
"More info:
Z-push is an implementation of the ActiveSync protocol which is used 'over-the-air' for multi platform ActiveSync devices, including Windows Mobile, iPhone, Sony Ericsson and Nokia mobile devices. With Z-push any groupware can be connected and synced with these devices."
8
Installation and Upgrades / Norwegian Bokmål translation of eGroupWare rdy for test.
« on: September 21, 2009, 10:19:07 am »
I have now translated most of eGroupWare to Norwegian Bokmål.
It submitted to eGW but will not be available until the next version of eGW.
If anyone want to try it, you can download it here:
http://www.speedy.no/egw-no.tar.gz
Unpack and copy the egw_no.lang of each module to /usr/share/egroupware/<modulename>/setup/
It submitted to eGW but will not be available until the next version of eGW.
If anyone want to try it, you can download it here:
http://www.speedy.no/egw-no.tar.gz
Unpack and copy the egw_no.lang of each module to /usr/share/egroupware/<modulename>/setup/
9
Installation and Upgrades / Re: I'm getting mixed encodings in eGroupware...
« on: September 20, 2009, 07:41:49 am »
Lol... What has english to do with this?!? No special chars are used in english....
Try a different language...
As you can see all headers with english text show fine...
The problem is not what Quicksupport is traslated as, but that the GUI and mail headers are displayed in 2 different encoding formats. Only one encoding can be use for a page to see it correctly.
Try a different language...
As you can see all headers with english text show fine...
The problem is not what Quicksupport is traslated as, but that the GUI and mail headers are displayed in 2 different encoding formats. Only one encoding can be use for a page to see it correctly.
10
Installation and Upgrades / Re: sudo apt-get update, files held back
« on: September 18, 2009, 06:12:53 pm »
Skip the keyserver.... and just say yes when updating 
11
Installation and Upgrades / I'm getting mixed encodings in eGroupware...
« on: September 18, 2009, 04:42:48 pm »
eGroupware is supposed to be all UTF-8. And all language files are UTF-8.
But using the integrated webemail (felamimail), I get different encodings on the header and in the body.
The Header is encoded in ISO-8855-1, the body is encoded in UTF-8 and the GUI is encoded in UTF-8.
This is how it looks when I open the mail window:
And changing the encoding in Firefox manually to ISO-8859-1 gives me this:
As you can see, the GUI is unreadable and the headers are readable with ISO-8859-1 encoding in Firefox. But if I open a email the body is encoded in UTF-8 and special caracters are then unreadable. If I dont change do ISO-8859-1 encoding in Firefox the body of the email is readable.
My guess is that this is a BUG in eBox, and the email headers are stored in ISO-8859-1. Can anyone confirm this?
But using the integrated webemail (felamimail), I get different encodings on the header and in the body.
The Header is encoded in ISO-8855-1, the body is encoded in UTF-8 and the GUI is encoded in UTF-8.
This is how it looks when I open the mail window:
And changing the encoding in Firefox manually to ISO-8859-1 gives me this:
As you can see, the GUI is unreadable and the headers are readable with ISO-8859-1 encoding in Firefox. But if I open a email the body is encoded in UTF-8 and special caracters are then unreadable. If I dont change do ISO-8859-1 encoding in Firefox the body of the email is readable.
My guess is that this is a BUG in eBox, and the email headers are stored in ISO-8859-1. Can anyone confirm this?
12
Installation and Upgrades / Re: sudo apt-get update, files held back
« on: September 18, 2009, 05:37:34 am »
Try:
Code: [Select]
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 100A7490070626B9
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 5F99A088342D17AC
sudo apt-get update
sudo apt-get dist-upgrade
13
Installation and Upgrades / Re: I want to translate eGroupware what is the admin user/password?
« on: September 16, 2009, 01:23:38 pm »
Hehe 
RTFM!
RTFM!
14
Installation and Upgrades / I want to translate eGroupware what is the admin user/password?
« on: September 16, 2009, 12:12:16 pm »
Hi. Since I'm done translating eBox to Norwegian, I wan to start translating eGroupware too.
I asked in the eGroupware forum, how to start translating, and this was the reply I got:
I have tried the user I created in eBox, and admin with the eBox password.
Anyone know what the admin password in eGroupware is in eBox?
I asked in the eGroupware forum, how to start translating, and this was the reply I got:
Code: [Select]
Hi,
The eGroupWare has an integrated translation tool, called "developer tools".
First, you should install English and Norwegian languages as egroupware
domain config user via http://yoursite/egroupware/setup
After that, login to your egroupware account as admin and make developer
tools to available for you.
Now you will see the developer tools module. StartIT (this is the name of my
company :)
So, you will get a list about all installed modules. Just select one and
start translating.
Be careful, the webserver must have a write permission to the filesystem
(module_name/setup) to write out the new language file.
Have fun!
Cheers,
István
Hungarian translatorI can enter that page, but I have no usable user/passwords.I have tried the user I created in eBox, and admin with the eBox password.
Anyone know what the admin password in eGroupware is in eBox?
15
Installation and Upgrades / Re: Problem installing eBox as a linux file share / e-mail server
« on: September 09, 2009, 11:55:59 am »
Open up the firewall...
You need to set up:
Filtering rules from external networks to eBox
Allow acces to HTTP software and Mail system.
You need to set up:
Filtering rules from external networks to eBox
Allow acces to HTTP software and Mail system.
Pages: [1] 2