This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Re: Configure module: users
« on: May 12, 2010, 09:04:42 am »
hi!
sorry for crossposting ..
I have the same issue on a fresh install of ubuntu lucid 64bit ..
How can I help to resolv this?
I tested the suggested options here in the forum - but nothing worked - I stell get the
"nasty bug" error ..
regards
macho
sorry for crossposting ..
I have the same issue on a fresh install of ubuntu lucid 64bit ..
How can I help to resolv this?
I tested the suggested options here in the forum - but nothing worked - I stell get the
"nasty bug" error ..
regards
macho
2
News and Announcements / Re: New eBox 1.5 packages for Ubuntu 10.04 Lucid
« on: May 12, 2010, 08:41:23 am »
Hi!
I'm new to ebox (and right now I have to find out how to help you) and therefore I'm probably wrong here.
I wanted to test the new 1.5 release - installed ubuntu lucid 64bit server and added the repository - then i installed all things related to ebox (to be sure that nothig is left out).
Theres not Problem enabling the Network in the Modules Status - but whenever I'd like to enable "Users and Groups" (and save the changes made) there is a big error:
A really nasty bug has occurred
Exception
Failed to enable: root command ldapadd -H 'ldapi://' -Y EXTERNAL -c -f /var/lib/ebox/tmp/slapd-master.ldif failed. Error output: SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 ldap_modify: Inappropriate matching (18) additional info: modify/add: olcTLSCACertificateFile: no equality matching rule ldap_modify: Type or value exists (20) additional info: modify/add: olcAccess: value #0 already exists ldap_add: Naming violation (64) ldap_add: Other (e.g., implementation specific) error (80) additional info: olcAttributeTypes: Duplicate attributeType: "0.9.2342.19200300.100.1.2" ldap_add: Other (e.g., implementation specific) error (80) additional info: olcAttributeTypes: Duplicate attributeType: "1.3.6.1.1.1.1.2" ldap_add: Other (e.g., implementation specific) error (80) additional info: olcAttributeTypes: Duplicate attributeType: "2.16.840.1.113730.3.1.1" ldap_modify: Type or value exists (20) additional info: modify/add: olcAccess: value #0 already exists Command output: modifying entry "cn=config" modifying entry "olcDatabase={-1}frontend,cn=config" adding new entry "cn=module{0},cn=config" adding new entry "cn=cosine,cn=schema,cn=config" adding new entry "cn=nis,cn=schema,cn=config" adding new entry "cn=inetorgperson,cn=schema,cn=config" adding new entry "olcDatabase={1}hdb,cn=config" adding new entry "olcOverlay=syncprov,olcDatabase={1}hdb,cn=config" modifying entry "olcDatabase={0}config,cn=config" . Exit value: 20
Trace
Failed to enable: root command ldapadd -H 'ldapi://' -Y EXTERNAL -c -f /var/lib/ebox/tmp/slapd-master.ldif failed.
Error output: SASL/EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth
SASL SSF: 0
ldap_modify: Inappropriate matching (18)
additional info: modify/add: olcTLSCACertificateFile: no equality matching rule
ldap_modify: Type or value exists (20)
additional info: modify/add: olcAccess: value #0 already exists
ldap_add: Naming violation (64)
ldap_add: Other (e.g., implementation specific) error (80)
additional info: olcAttributeTypes: Duplicate attributeType: "0.9.2342.19200300.100.1.2"
ldap_add: Other (e.g., implementation specific) error (80)
additional info: olcAttributeTypes: Duplicate attributeType: "1.3.6.1.1.1.1.2"
ldap_add: Other (e.g., implementation specific) error (80)
additional info: olcAttributeTypes: Duplicate attributeType: "2.16.840.1.113730.3.1.1"
ldap_modify: Type or value exists (20)
additional info: modify/add: olcAccess: value #0 already exists
Command output: modifying entry "cn=config"
modifying entry "olcDatabase={-1}frontend,cn=config"
adding new entry "cn=module{0},cn=config"
adding new entry "cn=cosine,cn=schema,cn=config"
adding new entry "cn=nis,cn=schema,cn=config"
adding new entry "cn=inetorgperson,cn=schema,cn=config"
adding new entry "olcDatabase={1}hdb,cn=config"
adding new entry "olcOverlay=syncprov,olcDatabase={1}hdb,cn=config"
modifying entry "olcDatabase={0}config,cn=config"
.
Exit value: 20 at /usr/share/perl5/EBox/CGI/ServiceModule/ConfigureModuleController.pm line 74
EBox::CGI::ServiceModule::ConfigureModuleController::_process('EBox::CGI::ServiceModule::ConfigureModuleController=HASH(0xbc...') called at /usr/share/perl5/EBox/CGI/Base.pm line 262
EBox::CGI::Base::run('EBox::CGI::ServiceModule::ConfigureModuleController=HASH(0xbc...') called at /usr/share/perl5/EBox/CGI/Run.pm line 120
EBox::CGI::Run::run('EBox::CGI::Run', 'ServiceModule/ConfigureModuleController', 'EBox') called at /usr/share/ebox/cgi/ebox.cgi line 19
ModPerl::ROOT::ModPerl::Registry::usr_share_ebox_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0xbc046cb0)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
eval {...} called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0xbc050690)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 170
ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0xbc050690)') called at /usr/lib/perl5/ModPerl/Registry.pm line 31
ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0xbc046cb0)') called at -e line 0
eval {...} called at -e line 0
please point me to the correct page where to post this "bug?" and help you best in testing 1.5.
Probably I am doing something wrong but it's a standard installation of ubuntu with nothing special.. and only added the ebox repositorys from launchpad and installed ebox ..
So what to do next?
regards
macho
I'm new to ebox (and right now I have to find out how to help you) and therefore I'm probably wrong here.
I wanted to test the new 1.5 release - installed ubuntu lucid 64bit server and added the repository - then i installed all things related to ebox (to be sure that nothig is left out).
Theres not Problem enabling the Network in the Modules Status - but whenever I'd like to enable "Users and Groups" (and save the changes made) there is a big error:
A really nasty bug has occurred
Exception
Failed to enable: root command ldapadd -H 'ldapi://' -Y EXTERNAL -c -f /var/lib/ebox/tmp/slapd-master.ldif failed. Error output: SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 ldap_modify: Inappropriate matching (18) additional info: modify/add: olcTLSCACertificateFile: no equality matching rule ldap_modify: Type or value exists (20) additional info: modify/add: olcAccess: value #0 already exists ldap_add: Naming violation (64) ldap_add: Other (e.g., implementation specific) error (80) additional info: olcAttributeTypes: Duplicate attributeType: "0.9.2342.19200300.100.1.2" ldap_add: Other (e.g., implementation specific) error (80) additional info: olcAttributeTypes: Duplicate attributeType: "1.3.6.1.1.1.1.2" ldap_add: Other (e.g., implementation specific) error (80) additional info: olcAttributeTypes: Duplicate attributeType: "2.16.840.1.113730.3.1.1" ldap_modify: Type or value exists (20) additional info: modify/add: olcAccess: value #0 already exists Command output: modifying entry "cn=config" modifying entry "olcDatabase={-1}frontend,cn=config" adding new entry "cn=module{0},cn=config" adding new entry "cn=cosine,cn=schema,cn=config" adding new entry "cn=nis,cn=schema,cn=config" adding new entry "cn=inetorgperson,cn=schema,cn=config" adding new entry "olcDatabase={1}hdb,cn=config" adding new entry "olcOverlay=syncprov,olcDatabase={1}hdb,cn=config" modifying entry "olcDatabase={0}config,cn=config" . Exit value: 20
Trace
Failed to enable: root command ldapadd -H 'ldapi://' -Y EXTERNAL -c -f /var/lib/ebox/tmp/slapd-master.ldif failed.
Error output: SASL/EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth
SASL SSF: 0
ldap_modify: Inappropriate matching (18)
additional info: modify/add: olcTLSCACertificateFile: no equality matching rule
ldap_modify: Type or value exists (20)
additional info: modify/add: olcAccess: value #0 already exists
ldap_add: Naming violation (64)
ldap_add: Other (e.g., implementation specific) error (80)
additional info: olcAttributeTypes: Duplicate attributeType: "0.9.2342.19200300.100.1.2"
ldap_add: Other (e.g., implementation specific) error (80)
additional info: olcAttributeTypes: Duplicate attributeType: "1.3.6.1.1.1.1.2"
ldap_add: Other (e.g., implementation specific) error (80)
additional info: olcAttributeTypes: Duplicate attributeType: "2.16.840.1.113730.3.1.1"
ldap_modify: Type or value exists (20)
additional info: modify/add: olcAccess: value #0 already exists
Command output: modifying entry "cn=config"
modifying entry "olcDatabase={-1}frontend,cn=config"
adding new entry "cn=module{0},cn=config"
adding new entry "cn=cosine,cn=schema,cn=config"
adding new entry "cn=nis,cn=schema,cn=config"
adding new entry "cn=inetorgperson,cn=schema,cn=config"
adding new entry "olcDatabase={1}hdb,cn=config"
adding new entry "olcOverlay=syncprov,olcDatabase={1}hdb,cn=config"
modifying entry "olcDatabase={0}config,cn=config"
.
Exit value: 20 at /usr/share/perl5/EBox/CGI/ServiceModule/ConfigureModuleController.pm line 74
EBox::CGI::ServiceModule::ConfigureModuleController::_process('EBox::CGI::ServiceModule::ConfigureModuleController=HASH(0xbc...') called at /usr/share/perl5/EBox/CGI/Base.pm line 262
EBox::CGI::Base::run('EBox::CGI::ServiceModule::ConfigureModuleController=HASH(0xbc...') called at /usr/share/perl5/EBox/CGI/Run.pm line 120
EBox::CGI::Run::run('EBox::CGI::Run', 'ServiceModule/ConfigureModuleController', 'EBox') called at /usr/share/ebox/cgi/ebox.cgi line 19
ModPerl::ROOT::ModPerl::Registry::usr_share_ebox_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0xbc046cb0)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
eval {...} called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0xbc050690)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 170
ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0xbc050690)') called at /usr/lib/perl5/ModPerl/Registry.pm line 31
ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0xbc046cb0)') called at -e line 0
eval {...} called at -e line 0
please point me to the correct page where to post this "bug?" and help you best in testing 1.5.
Probably I am doing something wrong but it's a standard installation of ubuntu with nothing special.. and only added the ebox repositorys from launchpad and installed ebox ..
So what to do next?
regards
macho
Pages: [1]