Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Zentyal Cloud Dynamic DNS IP update ISSUE
« on: November 08, 2011, 01:50:24 pm »
Hi to all,
I'm using Zentyal 2.2 with the cloud system and I use to connect from remote site using MYSERVERNAME.zentyal.me !
My office have dynamic ip address, but in the last month i had never a reboot so my ip is not changed from the first time that i connected to the cloud.
Yesterday I had to reboot and now there is that problem:
- if I try to connect to MYSERVERNAME.zentyal.me it is still pointed to my OLD IP ADDRESS
- my server is right connected to the zentyal cloud, and if I login to my cloud page I can see the correct ip address ( Status: Connected (..) , Public IP: 79.35.x.x )
- In my cloud panel, by clicking "Update Log" under "Dynamic DNS" i can see the timestamp of my first connection to zentyal cloud, the host is MYSERVERNAME.zentyal.me, but the Ip address is the old one ( 95.247.*.* ) !
Is there the possibility to force the update of the ip manually ?
Why it have not adjourned my ip with the last ip address? How can I solve ?
Thanks!
I'm using Zentyal 2.2 with the cloud system and I use to connect from remote site using MYSERVERNAME.zentyal.me !
My office have dynamic ip address, but in the last month i had never a reboot so my ip is not changed from the first time that i connected to the cloud.
Yesterday I had to reboot and now there is that problem:
- if I try to connect to MYSERVERNAME.zentyal.me it is still pointed to my OLD IP ADDRESS
- my server is right connected to the zentyal cloud, and if I login to my cloud page I can see the correct ip address ( Status: Connected (..) , Public IP: 79.35.x.x )
- In my cloud panel, by clicking "Update Log" under "Dynamic DNS" i can see the timestamp of my first connection to zentyal cloud, the host is MYSERVERNAME.zentyal.me, but the Ip address is the old one ( 95.247.*.* ) !
Is there the possibility to force the update of the ip manually ?
Why it have not adjourned my ip with the last ip address? How can I solve ?
Thanks!
2
Installation and Upgrades / Incorrect Password Web Admin - version `LIBPAM_MODUTIL_1.1.3' not found
« on: May 31, 2011, 10:11:17 am »
Hi,
since this morning I can't login from my web interface. I got the message "Incorrect password" but the password is still the same.
's password:
Linux doss-srv 2.6.32-31-generic-pae #61-Ubuntu SMP Fri Apr 8 20:00:13 UTC 2011 i686 GNU/Linux
Ubuntu 10.04.2 LTS
Welcome to Ubuntu!
* Documentation: https://help.ubuntu.com/
*** Zentyal WARNING ***
I can login via ssh without problems with my password, but not from web, what can be happen ?
This is the auth.log:
From yesterday I've not done modify or other thing that can cause that !
Thanks, Lorenzo
since this morning I can't login from my web interface. I got the message "Incorrect password" but the password is still the same.
's password:
Linux doss-srv 2.6.32-31-generic-pae #61-Ubuntu SMP Fri Apr 8 20:00:13 UTC 2011 i686 GNU/Linux
Ubuntu 10.04.2 LTS
Welcome to Ubuntu!
* Documentation: https://help.ubuntu.com/
*** Zentyal WARNING ***
I can login via ssh without problems with my password, but not from web, what can be happen ?
This is the auth.log:
Code: [Select]
May 31 10:20:01 doss-srv CRON[9998]: PAM unable to dlopen(/lib/security/pam_env.so): /lib/libpam.so.0: version `LIBPAM_MODUTIL_1.1.3' not found (required by /lib/security/pam_env.so)
May 31 10:20:01 doss-srv CRON[9998]: PAM adding faulty module: /lib/security/pam_env.so
May 31 10:20:01 doss-srv CRON[9998]: pam_unix(cron:session): session opened for user root by (uid=0)
May 31 10:20:05 doss-srv apache2: PAM unable to dlopen(/lib/security/pam_env.so): /lib/libpam.so.0: version `LIBPAM_MODUTIL_1.1.3' not found (required by /lib/security/pam_env.so)
May 31 10:20:05 doss-srv apache2: PAM adding faulty module: /lib/security/pam_env.soFrom yesterday I've not done modify or other thing that can cause that !
Thanks, Lorenzo
3
Installation and Upgrades / Network problems
« on: May 03, 2011, 04:00:53 am »
Hi,
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:937463 errors:106478 dropped:75306 overruns:106478 frame:0
TX packets:995005 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
This is an external interface, connected to a router Atlantjs, is normal this situation for RX packets?
Thanks,
Lorenzo
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:937463 errors:106478 dropped:75306 overruns:106478 frame:0
TX packets:995005 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
This is an external interface, connected to a router Atlantjs, is normal this situation for RX packets?
Thanks,
Lorenzo
4
Installation and Upgrades / [SOLVED]Dyndns and interfaces
« on: April 29, 2011, 05:14:31 pm »
Hello,
I'm using Zentyal Gateway, I have 3 network cards with this scenario:
router Telecom (192.168.1.1) <---> Zentyal eth0 (192.168.1.100) external
router Tiscali (192.168.0.1) <---> Zentyal eth1 (192.168.0.100) external
switch Asus <------> Zentyal eth2 (192.168.2.100) internal
On Network->Gateway i've added both routers and I've set Telecom like default.
I need to have 2 dynamic hosts for both my external ips: my Tiscali's router (an Atlantjs) support directly DynDns service, so that's ok, but Telecom's router don't support it, so i need that Zentyal keep updated my Telecom's ip by dyndns.
The problem is that Zentyal much times send to DynDns.org the IP of tiscali (eth1) interface, how can I tell to Zentyal to use only the telecom (eth0) interface to update my address ?
I thought that I can modify ddclient.conf, or adding on iptables a rule to redirect all HTTP (or dyndns2?) traffic by eth0, but before to do that I wanna know if zentyal can do it directly!
Thanks,
Lorenzo
I'm using Zentyal Gateway, I have 3 network cards with this scenario:
router Telecom (192.168.1.1) <---> Zentyal eth0 (192.168.1.100) external
router Tiscali (192.168.0.1) <---> Zentyal eth1 (192.168.0.100) external
switch Asus <------> Zentyal eth2 (192.168.2.100) internal
On Network->Gateway i've added both routers and I've set Telecom like default.
I need to have 2 dynamic hosts for both my external ips: my Tiscali's router (an Atlantjs) support directly DynDns service, so that's ok, but Telecom's router don't support it, so i need that Zentyal keep updated my Telecom's ip by dyndns.
The problem is that Zentyal much times send to DynDns.org the IP of tiscali (eth1) interface, how can I tell to Zentyal to use only the telecom (eth0) interface to update my address ?
I thought that I can modify ddclient.conf, or adding on iptables a rule to redirect all HTTP (or dyndns2?) traffic by eth0, but before to do that I wanna know if zentyal can do it directly!
Thanks,
Lorenzo
5
Installation and Upgrades / [SOLVED]DHCP Leases
« on: April 23, 2011, 05:13:56 pm »
Hello,
I'm using Zentyal server like gateway+office, that's the situation:
router Telecom (192.168.1.1) <---> Zentyal eth0 (192.168.1.100) external
router Tiscali (192.168.0.1) <---> Zentyal eth1 (192.168.0.100) external
switch Asus <------> Zentyal eth2 (192.168.2.100) internal
I'm using 2 ADSL in load balancing, and my LAN's addresses are 192.168.2.0/24.
All worked correctly since today I've configured on eth2 the DHCP module, to assing in auto ips 192.168.2.1-50 to a group of PC postations.
First problem: when I connect some PC's to the Switch, i try to obtain the IP by DHCP from zentyal, but it cannot obtain this and pc get an ip like 169.164.....
The only cause that can I thought is that each router's (tiscali and alice) have a proper DHCP service, that I can't stop (blocked router from providers), so when a new pc try to discover a dhcp , it has some problems from those 3 dhcp service....
Second problem: after some times I've activated DHCP, eth2 (the interface who manage internal network) of my Zentyal server logged in DHCP and results in the list of leases, losing his originally and static IP 192.168.2.100, and he got 192.168.2.1!
Look:
DHCP leases
IP address MAC address Host name
192.168.2.1 00:1c:c4:5f:6e:36 doss-srv
How can is possible that the server is using his DHCP ??
I hope someone should help me to understand,
Thanks a lot,
Lorenzo
I'm using Zentyal server like gateway+office, that's the situation:
router Telecom (192.168.1.1) <---> Zentyal eth0 (192.168.1.100) external
router Tiscali (192.168.0.1) <---> Zentyal eth1 (192.168.0.100) external
switch Asus <------> Zentyal eth2 (192.168.2.100) internal
I'm using 2 ADSL in load balancing, and my LAN's addresses are 192.168.2.0/24.
All worked correctly since today I've configured on eth2 the DHCP module, to assing in auto ips 192.168.2.1-50 to a group of PC postations.
First problem: when I connect some PC's to the Switch, i try to obtain the IP by DHCP from zentyal, but it cannot obtain this and pc get an ip like 169.164.....
The only cause that can I thought is that each router's (tiscali and alice) have a proper DHCP service, that I can't stop (blocked router from providers), so when a new pc try to discover a dhcp , it has some problems from those 3 dhcp service....
Second problem: after some times I've activated DHCP, eth2 (the interface who manage internal network) of my Zentyal server logged in DHCP and results in the list of leases, losing his originally and static IP 192.168.2.100, and he got 192.168.2.1!
Look:
DHCP leases
IP address MAC address Host name
192.168.2.1 00:1c:c4:5f:6e:36 doss-srv
How can is possible that the server is using his DHCP ??
I hope someone should help me to understand,
Thanks a lot,
Lorenzo
6
Installation and Upgrades / Access Denied entering Domain
« on: April 10, 2011, 05:25:48 pm »
Hello,
I have setup a Zentyal Server for my local domain.
I have done Office install, I have configured PDC, i added User "Test" in Group "Staff", i have enabled it, but when I try to associate my WinXpSp3 to the domain I got ACCESS DENIED.
There is my /etc/var/messages:
and /var/log/syslog:
Someone can explane me the situation please?
Thanks,L
I have setup a Zentyal Server for my local domain.
I have done Office install, I have configured PDC, i added User "Test" in Group "Staff", i have enabled it, but when I try to associate my WinXpSp3 to the domain I got ACCESS DENIED.
There is my /etc/var/messages:
Code: [Select]
Apr 10 17:19:31 doss-srv smbd_audit: prova|192.168.2.100|connect|ok|IPC$
Apr 10 17:19:32 doss-srv smbd_audit: prova|192.168.2.100|disconnect|ok|IPC$
Apr 10 17:19:32 doss-srv smbd_audit: prova|192.168.2.100|connect|ok|IPC$
Apr 10 17:19:33 doss-srv smbd_audit: prova|192.168.2.100|disconnect|ok|IPC$
and /var/log/syslog:
Code: [Select]
Apr 10 17:19:31 doss-srv slapd[32597]: <= bdb_equality_candidates: (gidNumber) not indexed
Apr 10 17:19:31 doss-srv slapd[32597]: <= bdb_equality_candidates: (gidNumber) not indexed
Apr 10 17:19:31 doss-srv slapd[32597]: <= bdb_equality_candidates: (uniqueMember) not indexed
Apr 10 17:19:31 doss-srv slapd[32597]: last message repeated 2 times
Apr 10 17:19:31 doss-srv slapd[32597]: <= bdb_equality_candidates: (gidNumber) not indexed
Apr 10 17:19:31 doss-srv smbd_audit: prova|192.168.2.100|connect|ok|IPC$
Apr 10 17:19:32 doss-srv smbd_audit: prova|192.168.2.100|disconnect|ok|IPC$
Apr 10 17:19:32 doss-srv slapd[32597]: connection_read(17): no connection!
Apr 10 17:19:32 doss-srv slapd[32597]: connection_read(17): no connection!
Apr 10 17:19:32 doss-srv slapd[32597]: <= bdb_equality_candidates: (gidNumber) not indexed
Apr 10 17:19:32 doss-srv slapd[32597]: <= bdb_equality_candidates: (gidNumber) not indexed
Apr 10 17:19:32 doss-srv slapd[32597]: <= bdb_equality_candidates: (uniqueMember) not indexed
Apr 10 17:19:32 doss-srv slapd[32597]: last message repeated 2 times
Apr 10 17:19:32 doss-srv slapd[32597]: <= bdb_equality_candidates: (gidNumber) not indexed
Apr 10 17:19:32 doss-srv smbd_audit: prova|192.168.2.100|connect|ok|IPC$
Apr 10 17:19:32 doss-srv slapd[32597]: <= bdb_equality_candidates: (displayName) not indexed
Apr 10 17:19:32 doss-srv slapd[32597]: <= bdb_equality_candidates: (cn) not indexed
Apr 10 17:19:33 doss-srv smbd_audit: prova|192.168.2.100|disconnect|ok|IPC$
Someone can explane me the situation please?
Thanks,L
7
Installation and Upgrades / [SOLVED]How to change Domain Name
« on: April 10, 2011, 04:47:15 am »
Hello,
I am using a Zentyal Server with Gateway and Office components.
I'm trying to change the Domain Name, and the documentation tell that I have to go on "Users and Groups ‣ Mode" and change it (like in the image)
But in my administration window I cannot find the entry "mode" under the "users and groups", that is my LDAP Infos:
LDAP Settings
LDAP information
Base DN: dc=doss-srv,dc=homenet,dc=telecomitalia,dc=it
Root DN: cn=ebox,dc=doss-srv,dc=homenet,dc=telecomitalia,dc=it
Password: ...
Users DN: ou=Users,dc=doss-srv,dc=homenet,dc=telecomitalia,dc=it
Groups DN: ou=Groups,dc=doss-srv,dc=homenet,dc=telecomitalia,dc=it
Please someone can explain to me how can I do this?
Thanks,
Lorenzo
I am using a Zentyal Server with Gateway and Office components.
I'm trying to change the Domain Name, and the documentation tell that I have to go on "Users and Groups ‣ Mode" and change it (like in the image)
But in my administration window I cannot find the entry "mode" under the "users and groups", that is my LDAP Infos:
LDAP Settings
LDAP information
Base DN: dc=doss-srv,dc=homenet,dc=telecomitalia,dc=it
Root DN: cn=ebox,dc=doss-srv,dc=homenet,dc=telecomitalia,dc=it
Password: ...
Users DN: ou=Users,dc=doss-srv,dc=homenet,dc=telecomitalia,dc=it
Groups DN: ou=Groups,dc=doss-srv,dc=homenet,dc=telecomitalia,dc=it
Please someone can explain to me how can I do this?
Thanks,
Lorenzo
8
Installation and Upgrades / zentyal & mail backup
« on: March 28, 2011, 02:33:24 am »
Hello,
first, special thanks to Zentyal developers for the good work.
I'm thinking about to setup a Zentyal server to manage the network of a little office (c.a. 10 pc).
Actually i'm using a Debian server with samba+iptables+squid, to manage http traffic, printers and files. There is no PDC.
I try to explane you the scenario:
They (stakeholders) use a remote mail server, and there is a traffic of c.a 100 email daily, from 7 different mail addresses.
I need to centralize the backup of all mail accounts, but (actually) I can't set-up the Zentyal as Mail Server and I have to continue using the remote one!
Now every pc has his personal backup on external drive of PST archive (outlook) and there are like 30Gb of archive totally.
I hope I was clear enough, I remain waiting for your kind advice,
Lorenzo
first, special thanks to Zentyal developers for the good work.
I'm thinking about to setup a Zentyal server to manage the network of a little office (c.a. 10 pc).
Actually i'm using a Debian server with samba+iptables+squid, to manage http traffic, printers and files. There is no PDC.
I try to explane you the scenario:
They (stakeholders) use a remote mail server, and there is a traffic of c.a 100 email daily, from 7 different mail addresses.
I need to centralize the backup of all mail accounts, but (actually) I can't set-up the Zentyal as Mail Server and I have to continue using the remote one!
Now every pc has his personal backup on external drive of PST archive (outlook) and there are like 30Gb of archive totally.
I hope I was clear enough, I remain waiting for your kind advice,
Lorenzo
Pages: [1]